| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay |
| 4 |
* (Armada 370 SoC). |
| 5 |
* |
| 6 |
* Copyright (C) 2015 Seagate |
| 7 |
* |
| 8 |
* Author: Simon Guinot <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/* |
| 12 |
* TODO: add support for the white SATA LED. |
| 13 |
*/ |
| 14 |
|
| 15 |
#include "armada-370.dtsi" |
| 16 |
#include <dt-bindings/gpio/gpio.h> |
| 17 |
#include <dt-bindings/input/input.h> |
| 18 |
|
| 19 |
/ { |
| 20 |
chosen { |
| 21 |
stdout-path = "serial0:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
memory@0 { |
| 25 |
device_type = "memory"; |
| 26 |
reg = <0x00000000 0x20000000>; /* 512 MB */ |
| 27 |
}; |
| 28 |
|
| 29 |
soc { |
| 30 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| 31 |
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; |
| 32 |
|
| 33 |
internal-regs { |
| 34 |
coherency-fabric@20200 { |
| 35 |
broken-idle; |
| 36 |
}; |
| 37 |
|
| 38 |
serial@12000 { |
| 39 |
status = "okay"; |
| 40 |
}; |
| 41 |
|
| 42 |
ethernet@74000 { |
| 43 |
status = "okay"; |
| 44 |
pinctrl-0 = <&ge1_rgmii_pins>; |
| 45 |
pinctrl-names = "default"; |
| 46 |
phy = <&phy0>; |
| 47 |
phy-mode = "rgmii-id"; |
| 48 |
}; |
| 49 |
|
| 50 |
usb@50000 { |
| 51 |
status = "okay"; |
| 52 |
}; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
regulator-0 { |
| 57 |
compatible = "regulator-fixed"; |
| 58 |
regulator-name = "USB Power"; |
| 59 |
regulator-min-microvolt = <5000000>; |
| 60 |
regulator-max-microvolt = <5000000>; |
| 61 |
regulator-always-on; |
| 62 |
regulator-boot-on; |
| 63 |
gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; |
| 64 |
}; |
| 65 |
|
| 66 |
regulator-1 { |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
regulator-name = "SATA0 power"; |
| 69 |
regulator-min-microvolt = <5000000>; |
| 70 |
regulator-max-microvolt = <5000000>; |
| 71 |
enable-active-high; |
| 72 |
regulator-always-on; |
| 73 |
regulator-boot-on; |
| 74 |
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; |
| 75 |
}; |
| 76 |
|
| 77 |
gpio-keys { |
| 78 |
compatible = "gpio-keys"; |
| 79 |
|
| 80 |
button-power { |
| 81 |
label = "Power button"; |
| 82 |
linux,code = <KEY_POWER>; |
| 83 |
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; |
| 84 |
debounce-interval = <100>; |
| 85 |
}; |
| 86 |
button-reset { |
| 87 |
label = "Reset Button"; |
| 88 |
linux,code = <KEY_RESTART>; |
| 89 |
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; |
| 90 |
debounce-interval = <100>; |
| 91 |
}; |
| 92 |
button-usb { |
| 93 |
label = "USB VBUS error"; |
| 94 |
linux,code = <KEY_UNKNOWN>; |
| 95 |
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; |
| 96 |
debounce-interval = <100>; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
gpio-leds { |
| 101 |
compatible = "gpio-leds"; |
| 102 |
|
| 103 |
led-red-sata0 { |
| 104 |
label = "cumulus:red:sata0"; |
| 105 |
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; |
| 106 |
default-state = "off"; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
gpio_poweroff { |
| 111 |
compatible = "gpio-poweroff"; |
| 112 |
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; |
| 113 |
}; |
| 114 |
}; |
| 115 |
|
| 116 |
&pciec { |
| 117 |
status = "okay"; |
| 118 |
|
| 119 |
/* USB 3.0 Bridge ASM1042A */ |
| 120 |
pcie@1,0 { |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
&mdio { |
| 126 |
pinctrl-0 = <&mdio_pins>; |
| 127 |
pinctrl-names = "default"; |
| 128 |
|
| 129 |
phy0: ethernet-phy@0 { |
| 130 |
reg = <0>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
&pinctrl { |
| 135 |
pinctrl-0 = <&sata_led_pin>; |
| 136 |
pinctrl-names = "default"; |
| 137 |
|
| 138 |
sata_led_pin: sata-led-pin { |
| 139 |
marvell,pins = "mpp60"; |
| 140 |
marvell,function = "sata0"; |
| 141 |
}; |
| 142 |
gpio_led_pin: gpio-led-pin { |
| 143 |
marvell,pins = "mpp60"; |
| 144 |
marvell,function = "gpio"; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
&spi0 { |
| 149 |
status = "okay"; |
| 150 |
pinctrl-0 = <&spi0_pins2>; |
| 151 |
pinctrl-names = "default"; |
| 152 |
|
| 153 |
flash@0 { |
| 154 |
#address-cells = <1>; |
| 155 |
#size-cells = <1>; |
| 156 |
/* MX25L8006E */ |
| 157 |
compatible = "mxicy,mx25l8005", "jedec,spi-nor"; |
| 158 |
reg = <0>; /* Chip select 0 */ |
| 159 |
spi-max-frequency = <50000000>; |
| 160 |
|
| 161 |
partition@0 { |
| 162 |
label = "u-boot"; |
| 163 |
reg = <0x0 0x100000>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
}; |