| 1 |
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for Ctera C200-V2 |
| 4 |
* |
| 5 |
* Copyright (C) 2022 Pawel Dembicki <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include "armada-370.dtsi" |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/thermal/thermal.h> |
| 14 |
#include <dt-bindings/leds/common.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Ctera C200 V2"; |
| 18 |
compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp"; |
| 19 |
|
| 20 |
chosen { |
| 21 |
bootargs = "console=ttyS0,115200"; |
| 22 |
stdout-path = "serial0:115200n8"; |
| 23 |
}; |
| 24 |
|
| 25 |
memory { |
| 26 |
device_type = "memory"; |
| 27 |
reg = <0x00000000 0x40000000>; /* 1024 MB */ |
| 28 |
}; |
| 29 |
|
| 30 |
soc { |
| 31 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 |
| 32 |
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 |
| 33 |
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; |
| 34 |
}; |
| 35 |
|
| 36 |
thermal-zones { |
| 37 |
ethphy-thermal { |
| 38 |
polling-delay = <20000>; |
| 39 |
polling-delay-passive = <2000>; |
| 40 |
|
| 41 |
thermal-sensors = <ðphy0>; |
| 42 |
|
| 43 |
trips { |
| 44 |
ethphy_alert1: trip1 { |
| 45 |
temperature = <65000>; |
| 46 |
hysteresis = <4000>; |
| 47 |
type = "passive"; |
| 48 |
}; |
| 49 |
|
| 50 |
ethphy_crit: trip2 { |
| 51 |
temperature = <100000>; |
| 52 |
hysteresis = <2000>; |
| 53 |
type = "critical"; |
| 54 |
}; |
| 55 |
}; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
beeper { |
| 60 |
compatible = "pwm-beeper"; |
| 61 |
pinctrl-0 = <&pmx_beeper>; |
| 62 |
pinctrl-names = "default"; |
| 63 |
pwms = <&gpio1 31 4000>; |
| 64 |
}; |
| 65 |
|
| 66 |
gpio-poweroff { |
| 67 |
compatible = "gpio-poweroff"; |
| 68 |
pinctrl-0 = <&pmx_poweroff>; |
| 69 |
pinctrl-names = "default"; |
| 70 |
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; |
| 71 |
}; |
| 72 |
|
| 73 |
keys { |
| 74 |
compatible = "gpio-keys"; |
| 75 |
pinctrl-0 = <&pmx_buttons>; |
| 76 |
pinctrl-names = "default"; |
| 77 |
|
| 78 |
button-power { |
| 79 |
label = "Power Button"; |
| 80 |
linux,code = <KEY_POWER>; |
| 81 |
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; |
| 82 |
}; |
| 83 |
|
| 84 |
button-reset { |
| 85 |
label = "Reset Button"; |
| 86 |
linux,code = <KEY_RESTART>; |
| 87 |
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| 88 |
}; |
| 89 |
|
| 90 |
button-usb1 { |
| 91 |
label = "USB1 Button"; |
| 92 |
linux,code = <BTN_0>; |
| 93 |
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; |
| 94 |
}; |
| 95 |
|
| 96 |
button-usb2 { |
| 97 |
label = "USB2 Button"; |
| 98 |
linux,code = <BTN_1>; |
| 99 |
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
leds { |
| 104 |
compatible = "gpio-leds"; |
| 105 |
pinctrl-0 = <&pmx_leds1 &pmx_leds2>; |
| 106 |
pinctrl-names = "default"; |
| 107 |
|
| 108 |
led-0 { |
| 109 |
function = LED_FUNCTION_USB; |
| 110 |
function-enumerator = <2>; |
| 111 |
color = <LED_COLOR_ID_RED>; |
| 112 |
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
| 113 |
}; |
| 114 |
|
| 115 |
led-1 { |
| 116 |
function = LED_FUNCTION_USB; |
| 117 |
function-enumerator = <2>; |
| 118 |
color = <LED_COLOR_ID_GREEN>; |
| 119 |
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
| 120 |
}; |
| 121 |
|
| 122 |
led-2 { |
| 123 |
function = LED_FUNCTION_USB; |
| 124 |
function-enumerator = <1>; |
| 125 |
color = <LED_COLOR_ID_RED>; |
| 126 |
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; |
| 127 |
}; |
| 128 |
|
| 129 |
led-3 { |
| 130 |
function = LED_FUNCTION_USB; |
| 131 |
function-enumerator = <1>; |
| 132 |
color = <LED_COLOR_ID_GREEN>; |
| 133 |
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; |
| 134 |
}; |
| 135 |
|
| 136 |
led-4 { |
| 137 |
function = LED_FUNCTION_DISK; |
| 138 |
function-enumerator = <2>; |
| 139 |
color = <LED_COLOR_ID_GREEN>; |
| 140 |
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| 141 |
}; |
| 142 |
|
| 143 |
led-5 { |
| 144 |
function = LED_FUNCTION_DISK; |
| 145 |
function-enumerator = <1>; |
| 146 |
color = <LED_COLOR_ID_RED>; |
| 147 |
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; |
| 148 |
}; |
| 149 |
|
| 150 |
led-6 { |
| 151 |
function = LED_FUNCTION_DISK; |
| 152 |
function-enumerator = <2>; |
| 153 |
color = <LED_COLOR_ID_RED>; |
| 154 |
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| 155 |
}; |
| 156 |
|
| 157 |
led-7 { |
| 158 |
function = LED_FUNCTION_INDICATOR; |
| 159 |
color = <LED_COLOR_ID_BLUE>; |
| 160 |
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| 161 |
}; |
| 162 |
|
| 163 |
led-8 { |
| 164 |
function = LED_FUNCTION_DISK_ERR; |
| 165 |
color = <LED_COLOR_ID_RED>; |
| 166 |
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; |
| 167 |
}; |
| 168 |
|
| 169 |
led-9 { |
| 170 |
function = LED_FUNCTION_DISK_ERR; |
| 171 |
color = <LED_COLOR_ID_GREEN>; |
| 172 |
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; |
| 173 |
}; |
| 174 |
|
| 175 |
led-10 { |
| 176 |
function = LED_FUNCTION_STATUS; |
| 177 |
color = <LED_COLOR_ID_RED>; |
| 178 |
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; |
| 179 |
}; |
| 180 |
|
| 181 |
led-11 { |
| 182 |
function = LED_FUNCTION_DISK; |
| 183 |
function-enumerator = <1>; |
| 184 |
color = <LED_COLOR_ID_GREEN>; |
| 185 |
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| 186 |
}; |
| 187 |
|
| 188 |
led-12 { |
| 189 |
function = LED_FUNCTION_STATUS; |
| 190 |
color = <LED_COLOR_ID_GREEN>; |
| 191 |
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
&coherencyfab { |
| 197 |
broken-idle; |
| 198 |
}; |
| 199 |
|
| 200 |
ð1 { |
| 201 |
pinctrl-0 = <&ge1_rgmii_pins>; |
| 202 |
pinctrl-names = "default"; |
| 203 |
status = "okay"; |
| 204 |
phy-handle = <ðphy0>; |
| 205 |
phy-connection-type = "rgmii-id"; |
| 206 |
}; |
| 207 |
|
| 208 |
&i2c0 { |
| 209 |
pinctrl-0 = <&i2c0_pins>; |
| 210 |
pinctrl-names = "default"; |
| 211 |
clock-frequency = <100000>; |
| 212 |
status = "okay"; |
| 213 |
|
| 214 |
hwmon@2a { |
| 215 |
compatible = "nuvoton,nct7802"; |
| 216 |
reg = <0x2a>; |
| 217 |
}; |
| 218 |
|
| 219 |
rtc@30 { |
| 220 |
compatible = "sii,s35390a"; |
| 221 |
reg = <0x30>; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
&mdio { |
| 226 |
pinctrl-0 = <&mdio_pins>; |
| 227 |
pinctrl-names = "default"; |
| 228 |
|
| 229 |
ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ |
| 230 |
reg = <0>; |
| 231 |
#thermal-sensor-cells = <0>; |
| 232 |
}; |
| 233 |
}; |
| 234 |
|
| 235 |
&nand_controller { |
| 236 |
status = "okay"; |
| 237 |
|
| 238 |
nand@0 { |
| 239 |
reg = <0>; |
| 240 |
label = "pxa3xx_nand-0"; |
| 241 |
nand-rb = <0>; |
| 242 |
marvell,nand-keep-config; |
| 243 |
nand-on-flash-bbt; |
| 244 |
nand-ecc-strength = <4>; |
| 245 |
nand-ecc-step-size = <512>; |
| 246 |
|
| 247 |
partitions { |
| 248 |
compatible = "fixed-partitions"; |
| 249 |
#address-cells = <1>; |
| 250 |
#size-cells = <1>; |
| 251 |
|
| 252 |
partition@0 { |
| 253 |
label = "uboot"; |
| 254 |
reg = <0x0000000 0x200000>; |
| 255 |
read-only; |
| 256 |
}; |
| 257 |
|
| 258 |
partition@200000 { |
| 259 |
label = "certificate"; |
| 260 |
reg = <0x0200000 0x100000>; |
| 261 |
read-only; |
| 262 |
}; |
| 263 |
|
| 264 |
partition@300000 { |
| 265 |
label = "preset_cfg"; |
| 266 |
reg = <0x0300000 0x100000>; |
| 267 |
read-only; |
| 268 |
}; |
| 269 |
|
| 270 |
partition@400000 { |
| 271 |
label = "dev_params"; |
| 272 |
reg = <0x0400000 0x100000>; |
| 273 |
read-only; |
| 274 |
}; |
| 275 |
partition@500000 { |
| 276 |
label = "active_bank"; |
| 277 |
reg = <0x0500000 0x0100000>; |
| 278 |
}; |
| 279 |
|
| 280 |
partition@600000 { |
| 281 |
label = "magic"; |
| 282 |
reg = <0x0600000 0x0100000>; |
| 283 |
read-only; |
| 284 |
}; |
| 285 |
|
| 286 |
partition@700000 { |
| 287 |
label = "bank1"; |
| 288 |
reg = <0x0700000 0x2800000>; |
| 289 |
}; |
| 290 |
|
| 291 |
partition@2f00000 { |
| 292 |
label = "bank2"; |
| 293 |
reg = <0x2f00000 0x2800000>; |
| 294 |
}; |
| 295 |
|
| 296 |
/* 0x5700000-0x5a00000 undefined in vendor firmware */ |
| 297 |
|
| 298 |
partition@5a00000 { |
| 299 |
label = "reserved"; |
| 300 |
reg = <0x5a00000 0x2000000>; |
| 301 |
}; |
| 302 |
|
| 303 |
partition@7a00000 { |
| 304 |
label = "rootfs"; |
| 305 |
reg = <0x7a00000 0x8600000>; |
| 306 |
}; |
| 307 |
}; |
| 308 |
}; |
| 309 |
}; |
| 310 |
|
| 311 |
&pciec { |
| 312 |
status = "okay"; |
| 313 |
|
| 314 |
pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */ |
| 315 |
pinctrl-0 = <&pmx_pcie>; |
| 316 |
pinctrl-names = "default"; |
| 317 |
status = "okay"; |
| 318 |
reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; |
| 319 |
}; |
| 320 |
}; |
| 321 |
|
| 322 |
&pinctrl { |
| 323 |
pmx_poweroff: pmx-poweroff { |
| 324 |
marvell,pins = "mpp7"; |
| 325 |
marvell,function = "gpo"; |
| 326 |
}; |
| 327 |
|
| 328 |
pmx_power_cpu: pmx-power-cpu { |
| 329 |
marvell,pins = "mpp4"; |
| 330 |
marvell,function = "vdd"; |
| 331 |
}; |
| 332 |
|
| 333 |
pmx_buttons: pmx-buttons { |
| 334 |
marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32"; |
| 335 |
marvell,function = "gpio"; |
| 336 |
}; |
| 337 |
|
| 338 |
pmx_leds1: pmx-leds1 { |
| 339 |
marvell,pins = "mpp47"; |
| 340 |
marvell,function = "gpo"; |
| 341 |
}; |
| 342 |
|
| 343 |
pmx_leds2: pmx-leds2 { |
| 344 |
marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51", |
| 345 |
"mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58"; |
| 346 |
marvell,function = "gpio"; |
| 347 |
}; |
| 348 |
|
| 349 |
pmx_pcie: pmx-pcie { |
| 350 |
marvell,pins = "mpp59"; |
| 351 |
marvell,function = "gpio"; |
| 352 |
}; |
| 353 |
|
| 354 |
pmx_beeper: pmx-beeper { |
| 355 |
marvell,pins = "mpp63"; |
| 356 |
marvell,function = "gpio"; |
| 357 |
}; |
| 358 |
}; |
| 359 |
|
| 360 |
&pmsu { |
| 361 |
pinctrl-0 = <&pmx_power_cpu>; |
| 362 |
pinctrl-names = "default"; |
| 363 |
}; |
| 364 |
|
| 365 |
&rtc { |
| 366 |
status = "disabled"; |
| 367 |
}; |
| 368 |
|
| 369 |
&sata { |
| 370 |
nr-ports = <2>; |
| 371 |
status = "okay"; |
| 372 |
#address-cells = <1>; |
| 373 |
#size-cells = <0>; |
| 374 |
|
| 375 |
hdd0_temp: sata-port@0 { |
| 376 |
reg = <0>; |
| 377 |
#thermal-sensor-cells = <0>; |
| 378 |
}; |
| 379 |
|
| 380 |
hdd1_temp: sata-port@1 { |
| 381 |
reg = <1>; |
| 382 |
#thermal-sensor-cells = <0>; |
| 383 |
}; |
| 384 |
}; |
| 385 |
|
| 386 |
&uart0 { |
| 387 |
status = "okay"; |
| 388 |
}; |