| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Device Tree file for Excito Bubba B3 |
| 4 |
* |
| 5 |
* Copyright (C) 2013, Andrew Lunn <[email protected]> |
| 6 |
* |
| 7 |
* |
| 8 |
* Note: This requires a new'ish version of u-boot, which disables the |
| 9 |
* L2 cache. If your B3 silently fails to boot, u-boot is probably too |
| 10 |
* old. Either upgrade, or consider the following email: |
| 11 |
* |
| 12 |
* https://lists.debian.org/debian-arm/2012/08/msg00128.html |
| 13 |
*/ |
| 14 |
|
| 15 |
/dts-v1/; |
| 16 |
|
| 17 |
#include "kirkwood.dtsi" |
| 18 |
#include "kirkwood-6281.dtsi" |
| 19 |
|
| 20 |
/ { |
| 21 |
model = "Excito B3"; |
| 22 |
compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
| 23 |
memory { /* 512 MB */ |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x00000000 0x20000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
bootargs = "console=ttyS0,115200n8 earlyprintk"; |
| 30 |
stdout-path = &uart0; |
| 31 |
}; |
| 32 |
|
| 33 |
ocp@f1000000 { |
| 34 |
pinctrl: pin-controller@10000 { |
| 35 |
pmx_button_power: pmx-button-power { |
| 36 |
marvell,pins = "mpp39"; |
| 37 |
marvell,function = "gpio"; |
| 38 |
}; |
| 39 |
pmx_led_green: pmx-led-green { |
| 40 |
marvell,pins = "mpp38"; |
| 41 |
marvell,function = "gpio"; |
| 42 |
}; |
| 43 |
pmx_led_red: pmx-led-red { |
| 44 |
marvell,pins = "mpp41"; |
| 45 |
marvell,function = "gpio"; |
| 46 |
}; |
| 47 |
pmx_led_blue: pmx-led-blue { |
| 48 |
marvell,pins = "mpp42"; |
| 49 |
marvell,function = "gpio"; |
| 50 |
}; |
| 51 |
pmx_beeper: pmx-beeper { |
| 52 |
marvell,pins = "mpp40"; |
| 53 |
marvell,function = "gpio"; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
spi@10600 { |
| 58 |
status = "okay"; |
| 59 |
|
| 60 |
m25p16@0 { |
| 61 |
#address-cells = <1>; |
| 62 |
#size-cells = <1>; |
| 63 |
compatible = "st,m25p16", "jedec,spi-nor"; |
| 64 |
reg = <0>; |
| 65 |
spi-max-frequency = <40000000>; |
| 66 |
mode = <0>; |
| 67 |
|
| 68 |
partition@0 { |
| 69 |
reg = <0x0 0xc0000>; |
| 70 |
label = "u-boot"; |
| 71 |
}; |
| 72 |
|
| 73 |
partition@c0000 { |
| 74 |
reg = <0xc0000 0x20000>; |
| 75 |
label = "u-boot env"; |
| 76 |
}; |
| 77 |
|
| 78 |
partition@e0000 { |
| 79 |
reg = <0xe0000 0x120000>; |
| 80 |
label = "data"; |
| 81 |
}; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
i2c@11000 { |
| 86 |
status = "okay"; |
| 87 |
/* |
| 88 |
* There is something on the bus at address 0x64. |
| 89 |
* Not yet identified what it is, maybe the eeprom |
| 90 |
* for the Atheros WiFi chip? |
| 91 |
*/ |
| 92 |
}; |
| 93 |
|
| 94 |
|
| 95 |
serial@12000 { |
| 96 |
/* Internal on test pins, 3.3v TTL |
| 97 |
* UART0_RX = Testpoint 65 |
| 98 |
* UART0_TX = Testpoint 66 |
| 99 |
* See the Excito Wiki for more details. |
| 100 |
*/ |
| 101 |
status = "okay"; |
| 102 |
}; |
| 103 |
|
| 104 |
sata@80000 { |
| 105 |
/* One internal, the second as eSATA */ |
| 106 |
status = "okay"; |
| 107 |
nr-ports = <2>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
gpio-leds { |
| 112 |
/* |
| 113 |
* There is one LED "port" on the front and the colours |
| 114 |
* mix together giving some interesting combinations. |
| 115 |
*/ |
| 116 |
compatible = "gpio-leds"; |
| 117 |
pinctrl-0 = < &pmx_led_green &pmx_led_red |
| 118 |
&pmx_led_blue >; |
| 119 |
pinctrl-names = "default"; |
| 120 |
|
| 121 |
programming_led { |
| 122 |
label = "bubba3:green:programming"; |
| 123 |
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
| 124 |
default-state = "off"; |
| 125 |
}; |
| 126 |
|
| 127 |
error_led { |
| 128 |
label = "bubba3:red:error"; |
| 129 |
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| 130 |
}; |
| 131 |
|
| 132 |
active_led { |
| 133 |
label = "bubba3:blue:active"; |
| 134 |
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
gpio-keys { |
| 139 |
compatible = "gpio-keys"; |
| 140 |
pinctrl-0 = <&pmx_button_power>; |
| 141 |
pinctrl-names = "default"; |
| 142 |
|
| 143 |
power-button { |
| 144 |
/* On the back */ |
| 145 |
label = "Power Button"; |
| 146 |
linux,code = <KEY_POWER>; |
| 147 |
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
beeper: beeper { |
| 152 |
/* 4KHz Piezoelectric buzzer */ |
| 153 |
compatible = "gpio-beeper"; |
| 154 |
pinctrl-0 = <&pmx_beeper>; |
| 155 |
pinctrl-names = "default"; |
| 156 |
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
&mdio { |
| 161 |
status = "okay"; |
| 162 |
|
| 163 |
ethphy0: ethernet-phy@8 { |
| 164 |
device_type = "ethernet-phy"; |
| 165 |
reg = <8>; |
| 166 |
}; |
| 167 |
|
| 168 |
ethphy1: ethernet-phy@24 { |
| 169 |
device_type = "ethernet-phy"; |
| 170 |
reg = <24>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
ð0 { |
| 175 |
status = "okay"; |
| 176 |
ethernet0-port@0 { |
| 177 |
phy-handle = <ðphy0>; |
| 178 |
}; |
| 179 |
}; |
| 180 |
|
| 181 |
ð1 { |
| 182 |
status = "okay"; |
| 183 |
ethernet1-port@0 { |
| 184 |
phy-handle = <ðphy1>; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
/* Wifi model has Atheros chipset on pcie port */ |
| 189 |
&pciec { |
| 190 |
status = "okay"; |
| 191 |
}; |
| 192 |
|
| 193 |
&pcie0 { |
| 194 |
status = "okay"; |
| 195 |
}; |