| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree Include file for Marvell Armada 38x family of SoCs. |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Marvell |
| 6 |
* |
| 7 |
* Lior Amsalem <[email protected]> |
| 8 |
* Gregory CLEMENT <[email protected]> |
| 9 |
* Thomas Petazzoni <[email protected]> |
| 10 |
*/ |
| 11 |
|
| 12 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 13 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 14 |
|
| 15 |
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
| 16 |
|
| 17 |
/ { |
| 18 |
#address-cells = <1>; |
| 19 |
#size-cells = <1>; |
| 20 |
|
| 21 |
model = "Marvell Armada 38x family SoC"; |
| 22 |
compatible = "marvell,armada380"; |
| 23 |
|
| 24 |
aliases { |
| 25 |
gpio0 = &gpio0; |
| 26 |
gpio1 = &gpio1; |
| 27 |
serial0 = &uart0; |
| 28 |
serial1 = &uart1; |
| 29 |
}; |
| 30 |
|
| 31 |
pmu { |
| 32 |
compatible = "arm,cortex-a9-pmu"; |
| 33 |
interrupts-extended = <&mpic 3>; |
| 34 |
}; |
| 35 |
|
| 36 |
soc { |
| 37 |
compatible = "marvell,armada380-mbus", "simple-bus"; |
| 38 |
#address-cells = <2>; |
| 39 |
#size-cells = <1>; |
| 40 |
controller = <&mbusc>; |
| 41 |
interrupt-parent = <&gic>; |
| 42 |
pcie-mem-aperture = <0xe0000000 0x8000000>; |
| 43 |
pcie-io-aperture = <0xe8000000 0x100000>; |
| 44 |
|
| 45 |
bootrom { |
| 46 |
compatible = "marvell,bootrom"; |
| 47 |
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; |
| 48 |
}; |
| 49 |
|
| 50 |
devbus_bootcs: devbus-bootcs { |
| 51 |
compatible = "marvell,mvebu-devbus"; |
| 52 |
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; |
| 53 |
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; |
| 54 |
#address-cells = <1>; |
| 55 |
#size-cells = <1>; |
| 56 |
clocks = <&coreclk 0>; |
| 57 |
status = "disabled"; |
| 58 |
}; |
| 59 |
|
| 60 |
devbus_cs0: devbus-cs0 { |
| 61 |
compatible = "marvell,mvebu-devbus"; |
| 62 |
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; |
| 63 |
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; |
| 64 |
#address-cells = <1>; |
| 65 |
#size-cells = <1>; |
| 66 |
clocks = <&coreclk 0>; |
| 67 |
status = "disabled"; |
| 68 |
}; |
| 69 |
|
| 70 |
devbus_cs1: devbus-cs1 { |
| 71 |
compatible = "marvell,mvebu-devbus"; |
| 72 |
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; |
| 73 |
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; |
| 74 |
#address-cells = <1>; |
| 75 |
#size-cells = <1>; |
| 76 |
clocks = <&coreclk 0>; |
| 77 |
status = "disabled"; |
| 78 |
}; |
| 79 |
|
| 80 |
devbus_cs2: devbus-cs2 { |
| 81 |
compatible = "marvell,mvebu-devbus"; |
| 82 |
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; |
| 83 |
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; |
| 84 |
#address-cells = <1>; |
| 85 |
#size-cells = <1>; |
| 86 |
clocks = <&coreclk 0>; |
| 87 |
status = "disabled"; |
| 88 |
}; |
| 89 |
|
| 90 |
devbus_cs3: devbus-cs3 { |
| 91 |
compatible = "marvell,mvebu-devbus"; |
| 92 |
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; |
| 93 |
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; |
| 94 |
#address-cells = <1>; |
| 95 |
#size-cells = <1>; |
| 96 |
clocks = <&coreclk 0>; |
| 97 |
status = "disabled"; |
| 98 |
}; |
| 99 |
|
| 100 |
internal-regs { |
| 101 |
compatible = "simple-bus"; |
| 102 |
#address-cells = <1>; |
| 103 |
#size-cells = <1>; |
| 104 |
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
| 105 |
|
| 106 |
sdramc: sdramc@1400 { |
| 107 |
compatible = "marvell,armada-xp-sdram-controller"; |
| 108 |
reg = <0x1400 0x500>; |
| 109 |
}; |
| 110 |
|
| 111 |
L2: cache-controller@8000 { |
| 112 |
compatible = "arm,pl310-cache"; |
| 113 |
reg = <0x8000 0x1000>; |
| 114 |
cache-unified; |
| 115 |
cache-level = <2>; |
| 116 |
arm,double-linefill-incr = <0>; |
| 117 |
arm,double-linefill-wrap = <0>; |
| 118 |
arm,double-linefill = <0>; |
| 119 |
prefetch-data = <1>; |
| 120 |
}; |
| 121 |
|
| 122 |
scu@c000 { |
| 123 |
compatible = "arm,cortex-a9-scu"; |
| 124 |
reg = <0xc000 0x58>; |
| 125 |
}; |
| 126 |
|
| 127 |
timer@c200 { |
| 128 |
compatible = "arm,cortex-a9-global-timer"; |
| 129 |
reg = <0xc200 0x20>; |
| 130 |
interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
| 131 |
clocks = <&coreclk 2>; |
| 132 |
}; |
| 133 |
|
| 134 |
timer@c600 { |
| 135 |
compatible = "arm,cortex-a9-twd-timer"; |
| 136 |
reg = <0xc600 0x20>; |
| 137 |
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
| 138 |
clocks = <&coreclk 2>; |
| 139 |
}; |
| 140 |
|
| 141 |
gic: interrupt-controller@d000 { |
| 142 |
compatible = "arm,cortex-a9-gic"; |
| 143 |
#interrupt-cells = <3>; |
| 144 |
#size-cells = <0>; |
| 145 |
interrupt-controller; |
| 146 |
reg = <0xd000 0x1000>, |
| 147 |
<0xc100 0x100>; |
| 148 |
}; |
| 149 |
|
| 150 |
i2c0: i2c@11000 { |
| 151 |
compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; |
| 152 |
reg = <0x11000 0x20>; |
| 153 |
#address-cells = <1>; |
| 154 |
#size-cells = <0>; |
| 155 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 156 |
clocks = <&coreclk 0>; |
| 157 |
status = "disabled"; |
| 158 |
}; |
| 159 |
|
| 160 |
i2c1: i2c@11100 { |
| 161 |
compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; |
| 162 |
reg = <0x11100 0x20>; |
| 163 |
#address-cells = <1>; |
| 164 |
#size-cells = <0>; |
| 165 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 166 |
clocks = <&coreclk 0>; |
| 167 |
status = "disabled"; |
| 168 |
}; |
| 169 |
|
| 170 |
uart0: serial@12000 { |
| 171 |
compatible = "marvell,armada-38x-uart", "ns16550a"; |
| 172 |
reg = <0x12000 0x100>; |
| 173 |
reg-shift = <2>; |
| 174 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 175 |
reg-io-width = <1>; |
| 176 |
clocks = <&coreclk 0>; |
| 177 |
status = "disabled"; |
| 178 |
}; |
| 179 |
|
| 180 |
uart1: serial@12100 { |
| 181 |
compatible = "marvell,armada-38x-uart", "ns16550a"; |
| 182 |
reg = <0x12100 0x100>; |
| 183 |
reg-shift = <2>; |
| 184 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 185 |
reg-io-width = <1>; |
| 186 |
clocks = <&coreclk 0>; |
| 187 |
status = "disabled"; |
| 188 |
}; |
| 189 |
|
| 190 |
pinctrl: pinctrl@18000 { |
| 191 |
reg = <0x18000 0x20>; |
| 192 |
|
| 193 |
ge0_rgmii_pins: ge-rgmii-pins-0 { |
| 194 |
marvell,pins = "mpp6", "mpp7", "mpp8", |
| 195 |
"mpp9", "mpp10", "mpp11", |
| 196 |
"mpp12", "mpp13", "mpp14", |
| 197 |
"mpp15", "mpp16", "mpp17"; |
| 198 |
marvell,function = "ge0"; |
| 199 |
}; |
| 200 |
|
| 201 |
ge1_rgmii_pins: ge-rgmii-pins-1 { |
| 202 |
marvell,pins = "mpp21", "mpp27", "mpp28", |
| 203 |
"mpp29", "mpp30", "mpp31", |
| 204 |
"mpp32", "mpp37", "mpp38", |
| 205 |
"mpp39", "mpp40", "mpp41"; |
| 206 |
marvell,function = "ge1"; |
| 207 |
}; |
| 208 |
|
| 209 |
i2c0_pins: i2c-pins-0 { |
| 210 |
marvell,pins = "mpp2", "mpp3"; |
| 211 |
marvell,function = "i2c0"; |
| 212 |
}; |
| 213 |
|
| 214 |
mdio_pins: mdio-pins { |
| 215 |
marvell,pins = "mpp4", "mpp5"; |
| 216 |
marvell,function = "ge"; |
| 217 |
}; |
| 218 |
|
| 219 |
ref_clk0_pins: ref-clk-pins-0 { |
| 220 |
marvell,pins = "mpp45"; |
| 221 |
marvell,function = "ref"; |
| 222 |
}; |
| 223 |
|
| 224 |
ref_clk1_pins: ref-clk-pins-1 { |
| 225 |
marvell,pins = "mpp46"; |
| 226 |
marvell,function = "ref"; |
| 227 |
}; |
| 228 |
|
| 229 |
spi0_pins: spi-pins-0 { |
| 230 |
marvell,pins = "mpp22", "mpp23", "mpp24", |
| 231 |
"mpp25"; |
| 232 |
marvell,function = "spi0"; |
| 233 |
}; |
| 234 |
|
| 235 |
spi1_pins: spi-pins-1 { |
| 236 |
marvell,pins = "mpp56", "mpp57", "mpp58", |
| 237 |
"mpp59"; |
| 238 |
marvell,function = "spi1"; |
| 239 |
}; |
| 240 |
|
| 241 |
nand_pins: nand-pins { |
| 242 |
marvell,pins = "mpp22", "mpp34", "mpp23", |
| 243 |
"mpp33", "mpp38", "mpp28", |
| 244 |
"mpp40", "mpp42", "mpp35", |
| 245 |
"mpp36", "mpp25", "mpp30", |
| 246 |
"mpp32"; |
| 247 |
marvell,function = "dev"; |
| 248 |
}; |
| 249 |
|
| 250 |
nand_rb: nand-rb-pins { |
| 251 |
marvell,pins = "mpp41"; |
| 252 |
marvell,function = "nand"; |
| 253 |
}; |
| 254 |
|
| 255 |
uart0_pins: uart-pins-0 { |
| 256 |
marvell,pins = "mpp0", "mpp1"; |
| 257 |
marvell,function = "ua0"; |
| 258 |
}; |
| 259 |
|
| 260 |
uart1_pins: uart-pins-1 { |
| 261 |
marvell,pins = "mpp19", "mpp20"; |
| 262 |
marvell,function = "ua1"; |
| 263 |
}; |
| 264 |
|
| 265 |
sdhci_pins: sdhci-pins { |
| 266 |
marvell,pins = "mpp48", "mpp49", "mpp50", |
| 267 |
"mpp52", "mpp53", "mpp54", |
| 268 |
"mpp55", "mpp57", "mpp58", |
| 269 |
"mpp59"; |
| 270 |
marvell,function = "sd0"; |
| 271 |
}; |
| 272 |
|
| 273 |
sata0_pins: sata-pins-0 { |
| 274 |
marvell,pins = "mpp20"; |
| 275 |
marvell,function = "sata0"; |
| 276 |
}; |
| 277 |
|
| 278 |
sata1_pins: sata-pins-1 { |
| 279 |
marvell,pins = "mpp19"; |
| 280 |
marvell,function = "sata1"; |
| 281 |
}; |
| 282 |
|
| 283 |
sata2_pins: sata-pins-2 { |
| 284 |
marvell,pins = "mpp47"; |
| 285 |
marvell,function = "sata2"; |
| 286 |
}; |
| 287 |
|
| 288 |
sata3_pins: sata-pins-3 { |
| 289 |
marvell,pins = "mpp44"; |
| 290 |
marvell,function = "sata3"; |
| 291 |
}; |
| 292 |
|
| 293 |
i2s_pins: i2s-pins { |
| 294 |
marvell,pins = "mpp48", "mpp49", |
| 295 |
"mpp50", "mpp51", |
| 296 |
"mpp52", "mpp53"; |
| 297 |
marvell,function = "audio"; |
| 298 |
}; |
| 299 |
|
| 300 |
spdif_pins: spdif-pins { |
| 301 |
marvell,pins = "mpp51"; |
| 302 |
marvell,function = "audio"; |
| 303 |
}; |
| 304 |
}; |
| 305 |
|
| 306 |
gpio0: gpio@18100 { |
| 307 |
compatible = "marvell,armada-370-gpio", |
| 308 |
"marvell,orion-gpio"; |
| 309 |
reg = <0x18100 0x40>, <0x181c0 0x08>; |
| 310 |
reg-names = "gpio", "pwm"; |
| 311 |
ngpios = <32>; |
| 312 |
gpio-controller; |
| 313 |
gpio-ranges = <&pinctrl 0 0 32>; |
| 314 |
#gpio-cells = <2>; |
| 315 |
#pwm-cells = <2>; |
| 316 |
interrupt-controller; |
| 317 |
#interrupt-cells = <2>; |
| 318 |
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 319 |
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 320 |
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| 321 |
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 322 |
clocks = <&coreclk 0>; |
| 323 |
}; |
| 324 |
|
| 325 |
gpio1: gpio@18140 { |
| 326 |
compatible = "marvell,armada-370-gpio", |
| 327 |
"marvell,orion-gpio"; |
| 328 |
reg = <0x18140 0x40>, <0x181c8 0x08>; |
| 329 |
reg-names = "gpio", "pwm"; |
| 330 |
ngpios = <28>; |
| 331 |
gpio-controller; |
| 332 |
gpio-ranges = <&pinctrl 0 32 28>; |
| 333 |
#gpio-cells = <2>; |
| 334 |
#pwm-cells = <2>; |
| 335 |
interrupt-controller; |
| 336 |
#interrupt-cells = <2>; |
| 337 |
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 338 |
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 339 |
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| 340 |
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 341 |
clocks = <&coreclk 0>; |
| 342 |
}; |
| 343 |
|
| 344 |
systemc: system-controller@18200 { |
| 345 |
compatible = "marvell,armada-380-system-controller", |
| 346 |
"marvell,armada-370-xp-system-controller"; |
| 347 |
reg = <0x18200 0x100>; |
| 348 |
}; |
| 349 |
|
| 350 |
gateclk: clock-gating-control@18220 { |
| 351 |
compatible = "marvell,armada-380-gating-clock"; |
| 352 |
reg = <0x18220 0x4>; |
| 353 |
clocks = <&coreclk 0>; |
| 354 |
#clock-cells = <1>; |
| 355 |
}; |
| 356 |
|
| 357 |
comphy: phy@18300 { |
| 358 |
compatible = "marvell,armada-380-comphy"; |
| 359 |
reg-names = "comphy", "conf"; |
| 360 |
reg = <0x18300 0x100>, <0x18460 4>; |
| 361 |
#address-cells = <1>; |
| 362 |
#size-cells = <0>; |
| 363 |
|
| 364 |
comphy0: phy@0 { |
| 365 |
reg = <0>; |
| 366 |
#phy-cells = <1>; |
| 367 |
}; |
| 368 |
|
| 369 |
comphy1: phy@1 { |
| 370 |
reg = <1>; |
| 371 |
#phy-cells = <1>; |
| 372 |
}; |
| 373 |
|
| 374 |
comphy2: phy@2 { |
| 375 |
reg = <2>; |
| 376 |
#phy-cells = <1>; |
| 377 |
}; |
| 378 |
|
| 379 |
comphy3: phy@3 { |
| 380 |
reg = <3>; |
| 381 |
#phy-cells = <1>; |
| 382 |
}; |
| 383 |
|
| 384 |
comphy4: phy@4 { |
| 385 |
reg = <4>; |
| 386 |
#phy-cells = <1>; |
| 387 |
}; |
| 388 |
|
| 389 |
comphy5: phy@5 { |
| 390 |
reg = <5>; |
| 391 |
#phy-cells = <1>; |
| 392 |
}; |
| 393 |
}; |
| 394 |
|
| 395 |
coreclk: mvebu-sar@18600 { |
| 396 |
compatible = "marvell,armada-380-core-clock"; |
| 397 |
reg = <0x18600 0x04>; |
| 398 |
#clock-cells = <1>; |
| 399 |
}; |
| 400 |
|
| 401 |
mbusc: mbus-controller@20000 { |
| 402 |
compatible = "marvell,mbus-controller"; |
| 403 |
reg = <0x20000 0x100>, <0x20180 0x20>, |
| 404 |
<0x20250 0x8>; |
| 405 |
}; |
| 406 |
|
| 407 |
mpic: interrupt-controller@20a00 { |
| 408 |
compatible = "marvell,mpic"; |
| 409 |
reg = <0x20a00 0x2d0>, <0x21070 0x58>; |
| 410 |
#interrupt-cells = <1>; |
| 411 |
interrupt-controller; |
| 412 |
msi-controller; |
| 413 |
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 414 |
}; |
| 415 |
|
| 416 |
timer: timer@20300 { |
| 417 |
compatible = "marvell,armada-380-timer", |
| 418 |
"marvell,armada-xp-timer"; |
| 419 |
reg = <0x20300 0x30>, <0x21040 0x30>; |
| 420 |
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 421 |
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 422 |
<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| 423 |
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| 424 |
<&mpic 5>, |
| 425 |
<&mpic 6>; |
| 426 |
clocks = <&coreclk 2>, <&refclk>; |
| 427 |
clock-names = "nbclk", "fixed"; |
| 428 |
}; |
| 429 |
|
| 430 |
watchdog: watchdog@20300 { |
| 431 |
compatible = "marvell,armada-380-wdt"; |
| 432 |
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; |
| 433 |
clocks = <&coreclk 2>, <&refclk>; |
| 434 |
clock-names = "nbclk", "fixed"; |
| 435 |
interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| 436 |
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 437 |
}; |
| 438 |
|
| 439 |
cpurst: cpurst@20800 { |
| 440 |
compatible = "marvell,armada-370-cpu-reset"; |
| 441 |
reg = <0x20800 0x10>; |
| 442 |
}; |
| 443 |
|
| 444 |
mpcore-soc-ctrl@20d20 { |
| 445 |
compatible = "marvell,armada-380-mpcore-soc-ctrl"; |
| 446 |
reg = <0x20d20 0x6c>; |
| 447 |
}; |
| 448 |
|
| 449 |
coherencyfab: coherency-fabric@21010 { |
| 450 |
compatible = "marvell,armada-380-coherency-fabric"; |
| 451 |
reg = <0x21010 0x1c>; |
| 452 |
}; |
| 453 |
|
| 454 |
pmsu: pmsu@22000 { |
| 455 |
compatible = "marvell,armada-380-pmsu"; |
| 456 |
reg = <0x22000 0x1000>; |
| 457 |
}; |
| 458 |
|
| 459 |
/* |
| 460 |
* As a special exception to the "order by |
| 461 |
* register address" rule, the eth0 node is |
| 462 |
* placed here to ensure that it gets |
| 463 |
* registered as the first interface, since |
| 464 |
* the network subsystem doesn't allow naming |
| 465 |
* interfaces using DT aliases. Without this, |
| 466 |
* the ordering of interfaces is different |
| 467 |
* from the one used in U-Boot and the |
| 468 |
* labeling of interfaces on the boards, which |
| 469 |
* is very confusing for users. |
| 470 |
*/ |
| 471 |
eth0: ethernet@70000 { |
| 472 |
compatible = "marvell,armada-370-neta"; |
| 473 |
reg = <0x70000 0x4000>; |
| 474 |
interrupts-extended = <&mpic 8>; |
| 475 |
clocks = <&gateclk 4>; |
| 476 |
tx-csum-limit = <9800>; |
| 477 |
status = "disabled"; |
| 478 |
}; |
| 479 |
|
| 480 |
eth1: ethernet@30000 { |
| 481 |
compatible = "marvell,armada-370-neta"; |
| 482 |
reg = <0x30000 0x4000>; |
| 483 |
interrupts-extended = <&mpic 10>; |
| 484 |
clocks = <&gateclk 3>; |
| 485 |
status = "disabled"; |
| 486 |
}; |
| 487 |
|
| 488 |
eth2: ethernet@34000 { |
| 489 |
compatible = "marvell,armada-370-neta"; |
| 490 |
reg = <0x34000 0x4000>; |
| 491 |
interrupts-extended = <&mpic 12>; |
| 492 |
clocks = <&gateclk 2>; |
| 493 |
status = "disabled"; |
| 494 |
}; |
| 495 |
|
| 496 |
usb0: usb@58000 { |
| 497 |
compatible = "marvell,orion-ehci"; |
| 498 |
reg = <0x58000 0x500>; |
| 499 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 500 |
clocks = <&gateclk 18>; |
| 501 |
status = "disabled"; |
| 502 |
}; |
| 503 |
|
| 504 |
xor0: xor@60800 { |
| 505 |
compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| 506 |
reg = <0x60800 0x100 |
| 507 |
0x60a00 0x100>; |
| 508 |
clocks = <&gateclk 22>; |
| 509 |
status = "okay"; |
| 510 |
|
| 511 |
xor00 { |
| 512 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 513 |
dmacap,memcpy; |
| 514 |
dmacap,xor; |
| 515 |
}; |
| 516 |
xor01 { |
| 517 |
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 518 |
dmacap,memcpy; |
| 519 |
dmacap,xor; |
| 520 |
dmacap,memset; |
| 521 |
}; |
| 522 |
}; |
| 523 |
|
| 524 |
xor1: xor@60900 { |
| 525 |
compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| 526 |
reg = <0x60900 0x100 |
| 527 |
0x60b00 0x100>; |
| 528 |
clocks = <&gateclk 28>; |
| 529 |
status = "okay"; |
| 530 |
|
| 531 |
xor10 { |
| 532 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 533 |
dmacap,memcpy; |
| 534 |
dmacap,xor; |
| 535 |
}; |
| 536 |
xor11 { |
| 537 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 538 |
dmacap,memcpy; |
| 539 |
dmacap,xor; |
| 540 |
dmacap,memset; |
| 541 |
}; |
| 542 |
}; |
| 543 |
|
| 544 |
mdio: mdio@72004 { |
| 545 |
#address-cells = <1>; |
| 546 |
#size-cells = <0>; |
| 547 |
compatible = "marvell,orion-mdio"; |
| 548 |
reg = <0x72004 0x4>; |
| 549 |
clocks = <&gateclk 4>; |
| 550 |
}; |
| 551 |
|
| 552 |
cesa: crypto@90000 { |
| 553 |
compatible = "marvell,armada-38x-crypto"; |
| 554 |
reg = <0x90000 0x10000>; |
| 555 |
reg-names = "regs"; |
| 556 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| 557 |
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 558 |
clocks = <&gateclk 23>, <&gateclk 21>, |
| 559 |
<&gateclk 14>, <&gateclk 16>; |
| 560 |
clock-names = "cesa0", "cesa1", |
| 561 |
"cesaz0", "cesaz1"; |
| 562 |
marvell,crypto-srams = <&crypto_sram0>, |
| 563 |
<&crypto_sram1>; |
| 564 |
marvell,crypto-sram-size = <0x800>; |
| 565 |
}; |
| 566 |
|
| 567 |
rtc: rtc@a3800 { |
| 568 |
compatible = "marvell,armada-380-rtc"; |
| 569 |
reg = <0xa3800 0x20>, <0x184a0 0x0c>; |
| 570 |
reg-names = "rtc", "rtc-soc"; |
| 571 |
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| 572 |
}; |
| 573 |
|
| 574 |
ahci0: sata@a8000 { |
| 575 |
compatible = "marvell,armada-380-ahci"; |
| 576 |
reg = <0xa8000 0x2000>; |
| 577 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 578 |
clocks = <&gateclk 15>; |
| 579 |
status = "disabled"; |
| 580 |
}; |
| 581 |
|
| 582 |
bm: bm@c8000 { |
| 583 |
compatible = "marvell,armada-380-neta-bm"; |
| 584 |
reg = <0xc8000 0xac>; |
| 585 |
clocks = <&gateclk 13>; |
| 586 |
internal-mem = <&bm_bppi>; |
| 587 |
status = "disabled"; |
| 588 |
}; |
| 589 |
|
| 590 |
ahci1: sata@e0000 { |
| 591 |
compatible = "marvell,armada-380-ahci"; |
| 592 |
reg = <0xe0000 0x2000>; |
| 593 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 594 |
clocks = <&gateclk 30>; |
| 595 |
status = "disabled"; |
| 596 |
}; |
| 597 |
|
| 598 |
coredivclk: clock@e4250 { |
| 599 |
compatible = "marvell,armada-380-corediv-clock"; |
| 600 |
reg = <0xe4250 0xc>; |
| 601 |
#clock-cells = <1>; |
| 602 |
clocks = <&mainpll>; |
| 603 |
clock-output-names = "nand"; |
| 604 |
}; |
| 605 |
|
| 606 |
thermal: thermal@e8078 { |
| 607 |
compatible = "marvell,armada380-thermal"; |
| 608 |
reg = <0xe4078 0x4>, <0xe4070 0x8>; |
| 609 |
status = "okay"; |
| 610 |
}; |
| 611 |
|
| 612 |
nand_controller: nand-controller@d0000 { |
| 613 |
compatible = "marvell,armada370-nand-controller"; |
| 614 |
reg = <0xd0000 0x54>; |
| 615 |
#address-cells = <1>; |
| 616 |
#size-cells = <0>; |
| 617 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 618 |
clocks = <&coredivclk 0>; |
| 619 |
status = "disabled"; |
| 620 |
}; |
| 621 |
|
| 622 |
sdhci: sdhci@d8000 { |
| 623 |
compatible = "marvell,armada-380-sdhci"; |
| 624 |
reg-names = "sdhci", "mbus", "conf-sdio3"; |
| 625 |
reg = <0xd8000 0x1000>, |
| 626 |
<0xdc000 0x100>, |
| 627 |
<0x18454 0x4>; |
| 628 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 629 |
clocks = <&gateclk 17>; |
| 630 |
mrvl,clk-delay-cycles = <0x1F>; |
| 631 |
status = "disabled"; |
| 632 |
}; |
| 633 |
|
| 634 |
audio_controller: audio-controller@e8000 { |
| 635 |
#sound-dai-cells = <1>; |
| 636 |
compatible = "marvell,armada-380-audio"; |
| 637 |
reg = <0xe8000 0x4000>, <0x18410 0xc>, |
| 638 |
<0x18204 0x4>; |
| 639 |
reg-names = "i2s_regs", "pll_regs", "soc_ctrl"; |
| 640 |
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 641 |
clocks = <&gateclk 0>; |
| 642 |
clock-names = "internal"; |
| 643 |
status = "disabled"; |
| 644 |
}; |
| 645 |
|
| 646 |
usb3_0: usb3@f0000 { |
| 647 |
compatible = "marvell,armada-380-xhci"; |
| 648 |
reg = <0xf0000 0x4000>,<0xf4000 0x4000>; |
| 649 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 650 |
clocks = <&gateclk 9>; |
| 651 |
status = "disabled"; |
| 652 |
}; |
| 653 |
|
| 654 |
usb3_1: usb3@f8000 { |
| 655 |
compatible = "marvell,armada-380-xhci"; |
| 656 |
reg = <0xf8000 0x4000>,<0xfc000 0x4000>; |
| 657 |
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 658 |
clocks = <&gateclk 10>; |
| 659 |
status = "disabled"; |
| 660 |
}; |
| 661 |
}; |
| 662 |
|
| 663 |
crypto_sram0: sa-sram0 { |
| 664 |
compatible = "mmio-sram"; |
| 665 |
reg = <MBUS_ID(0x09, 0x19) 0 0x800>; |
| 666 |
clocks = <&gateclk 23>; |
| 667 |
#address-cells = <1>; |
| 668 |
#size-cells = <1>; |
| 669 |
ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; |
| 670 |
}; |
| 671 |
|
| 672 |
crypto_sram1: sa-sram1 { |
| 673 |
compatible = "mmio-sram"; |
| 674 |
reg = <MBUS_ID(0x09, 0x15) 0 0x800>; |
| 675 |
clocks = <&gateclk 21>; |
| 676 |
#address-cells = <1>; |
| 677 |
#size-cells = <1>; |
| 678 |
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; |
| 679 |
}; |
| 680 |
|
| 681 |
bm_bppi: bm-bppi { |
| 682 |
compatible = "mmio-sram"; |
| 683 |
reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; |
| 684 |
ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; |
| 685 |
#address-cells = <1>; |
| 686 |
#size-cells = <1>; |
| 687 |
clocks = <&gateclk 13>; |
| 688 |
no-memory-wc; |
| 689 |
status = "disabled"; |
| 690 |
}; |
| 691 |
|
| 692 |
spi0: spi@10600 { |
| 693 |
compatible = "marvell,armada-380-spi", |
| 694 |
"marvell,orion-spi"; |
| 695 |
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; |
| 696 |
#address-cells = <1>; |
| 697 |
#size-cells = <0>; |
| 698 |
cell-index = <0>; |
| 699 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 700 |
clocks = <&coreclk 0>; |
| 701 |
status = "disabled"; |
| 702 |
}; |
| 703 |
|
| 704 |
spi1: spi@10680 { |
| 705 |
compatible = "marvell,armada-380-spi", |
| 706 |
"marvell,orion-spi"; |
| 707 |
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; |
| 708 |
#address-cells = <1>; |
| 709 |
#size-cells = <0>; |
| 710 |
cell-index = <1>; |
| 711 |
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 712 |
clocks = <&coreclk 0>; |
| 713 |
status = "disabled"; |
| 714 |
}; |
| 715 |
}; |
| 716 |
|
| 717 |
clocks { |
| 718 |
/* 1 GHz fixed main PLL */ |
| 719 |
mainpll: mainpll { |
| 720 |
compatible = "fixed-clock"; |
| 721 |
#clock-cells = <0>; |
| 722 |
clock-frequency = <1000000000>; |
| 723 |
}; |
| 724 |
|
| 725 |
/* 25 MHz reference crystal */ |
| 726 |
refclk: oscillator { |
| 727 |
compatible = "fixed-clock"; |
| 728 |
#clock-cells = <0>; |
| 729 |
clock-frequency = <25000000>; |
| 730 |
}; |
| 731 |
}; |
| 732 |
}; |