Debian Codegraph @

arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2
3 #include "armada-385-clearfog-gtr.dtsi"
4
5 / {
6 model = "SolidRun Clearfog GTR S4";
7 compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385",
8 "marvell,armada380";
9 };
10
11 &sfp0 {
12 tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
13 };
14
15 &mdio {
16 switch0: ethernet-switch@4 {
17 compatible = "marvell,mv88e6085";
18 reg = <4>;
19 pinctrl-names = "default";
20 pinctrl-0 = <&cf_gtr_switch_reset_pins>;
21 reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
22
23 ethernet-ports {
24 #address-cells = <1>;
25 #size-cells = <0>;
26
27 ethernet-port@1 {
28 reg = <1>;
29 label = "lan2";
30 phy-handle = <&switch0phy0>;
31 };
32
33 ethernet-port@2 {
34 reg = <2>;
35 label = "lan1";
36 phy-handle = <&switch0phy1>;
37 };
38
39 ethernet-port@3 {
40 reg = <3>;
41 label = "lan4";
42 phy-handle = <&switch0phy2>;
43 };
44
45 ethernet-port@4 {
46 reg = <4>;
47 label = "lan3";
48 phy-handle = <&switch0phy3>;
49 };
50
51 ethernet-port@5 {
52 reg = <5>;
53 phy-mode = "2500base-x";
54 ethernet = <&eth1>;
55
56 fixed-link {
57 speed = <2500>;
58 full-duplex;
59 };
60 };
61
62 };
63
64 mdio {
65 #address-cells = <1>;
66 #size-cells = <0>;
67
68 switch0phy0: ethernet-phy@11 {
69 reg = <0x11>;
70 };
71
72 switch0phy1: ethernet-phy@12 {
73 reg = <0x12>;
74 };
75
76 switch0phy2: ethernet-phy@13 {
77 reg = <0x13>;
78 };
79
80 switch0phy3: ethernet-phy@14 {
81 reg = <0x14>;
82 };
83 };
84
85 };
86 };