| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for Marvell Armada 370 evaluation board |
| 4 |
* (DB-88F6710-BP-DDR3) |
| 5 |
* |
| 6 |
* Copyright (C) 2012 Marvell |
| 7 |
* |
| 8 |
* Lior Amsalem <[email protected]> |
| 9 |
* Gregory CLEMENT <[email protected]> |
| 10 |
* Thomas Petazzoni <[email protected]> |
| 11 |
* |
| 12 |
* Note: this Device Tree assumes that the bootloader has remapped the |
| 13 |
* internal registers to 0xf1000000 (instead of the default |
| 14 |
* 0xd0000000). The 0xf1000000 is the default used by the recent, |
| 15 |
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier |
| 16 |
* boards were delivered with an older version of the bootloader that |
| 17 |
* left internal registers mapped at 0xd0000000. If you are in this |
| 18 |
* situation, you should either update your bootloader (preferred |
| 19 |
* solution) or the below Device Tree should be adjusted. |
| 20 |
*/ |
| 21 |
|
| 22 |
/dts-v1/; |
| 23 |
#include "armada-370.dtsi" |
| 24 |
|
| 25 |
/ { |
| 26 |
model = "Marvell Armada 370 Evaluation Board"; |
| 27 |
compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; |
| 28 |
|
| 29 |
chosen { |
| 30 |
stdout-path = "serial0:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
memory@0 { |
| 34 |
device_type = "memory"; |
| 35 |
reg = <0x00000000 0x40000000>; /* 1 GB */ |
| 36 |
}; |
| 37 |
|
| 38 |
soc { |
| 39 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| 40 |
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 |
| 41 |
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; |
| 42 |
|
| 43 |
internal-regs { |
| 44 |
serial@12000 { |
| 45 |
status = "okay"; |
| 46 |
}; |
| 47 |
sata@a0000 { |
| 48 |
nr-ports = <2>; |
| 49 |
status = "okay"; |
| 50 |
}; |
| 51 |
|
| 52 |
ethernet@70000 { |
| 53 |
pinctrl-0 = <&ge0_rgmii_pins>; |
| 54 |
pinctrl-names = "default"; |
| 55 |
status = "okay"; |
| 56 |
phy = <&phy0>; |
| 57 |
phy-mode = "rgmii-id"; |
| 58 |
}; |
| 59 |
ethernet@74000 { |
| 60 |
pinctrl-0 = <&ge1_rgmii_pins>; |
| 61 |
pinctrl-names = "default"; |
| 62 |
status = "okay"; |
| 63 |
phy = <&phy1>; |
| 64 |
phy-mode = "rgmii-id"; |
| 65 |
}; |
| 66 |
|
| 67 |
i2c@11000 { |
| 68 |
pinctrl-0 = <&i2c0_pins>; |
| 69 |
pinctrl-names = "default"; |
| 70 |
clock-frequency = <100000>; |
| 71 |
status = "okay"; |
| 72 |
audio_codec: audio-codec@4a { |
| 73 |
#sound-dai-cells = <0>; |
| 74 |
compatible = "cirrus,cs42l51"; |
| 75 |
reg = <0x4a>; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
audio-controller@30000 { |
| 80 |
pinctrl-0 = <&i2s_pins2>; |
| 81 |
pinctrl-names = "default"; |
| 82 |
status = "okay"; |
| 83 |
}; |
| 84 |
|
| 85 |
mvsdio@d4000 { |
| 86 |
pinctrl-0 = <&sdio_pins1>; |
| 87 |
pinctrl-names = "default"; |
| 88 |
/* |
| 89 |
* This device is disabled by default, because |
| 90 |
* using the SD card connector requires |
| 91 |
* changing the default CON40 connector |
| 92 |
* "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a |
| 93 |
* different connector |
| 94 |
* "DB-88F6710_MPP_RGMII_SD_Jumper". |
| 95 |
*/ |
| 96 |
status = "disabled"; |
| 97 |
/* No CD or WP GPIOs */ |
| 98 |
broken-cd; |
| 99 |
}; |
| 100 |
|
| 101 |
usb@50000 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
usb@51000 { |
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
sound { |
| 112 |
compatible = "simple-audio-card"; |
| 113 |
simple-audio-card,name = "Armada 370 DB Audio"; |
| 114 |
simple-audio-card,mclk-fs = <256>; |
| 115 |
simple-audio-card,widgets = |
| 116 |
"Headphone", "Out Jack", |
| 117 |
"Line", "In Jack"; |
| 118 |
simple-audio-card,routing = |
| 119 |
"Out Jack", "HPL", |
| 120 |
"Out Jack", "HPR", |
| 121 |
"AIN1L", "In Jack", |
| 122 |
"AIN1R", "In Jack"; |
| 123 |
status = "okay"; |
| 124 |
|
| 125 |
simple-audio-card,dai-link@0 { |
| 126 |
format = "i2s"; |
| 127 |
cpu { |
| 128 |
sound-dai = <&audio_controller 0>; |
| 129 |
}; |
| 130 |
|
| 131 |
codec { |
| 132 |
sound-dai = <&audio_codec>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
simple-audio-card,dai-link@1 { |
| 137 |
format = "i2s"; |
| 138 |
cpu { |
| 139 |
sound-dai = <&audio_controller 1>; |
| 140 |
}; |
| 141 |
|
| 142 |
codec { |
| 143 |
sound-dai = <&spdif_out>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
simple-audio-card,dai-link@2 { |
| 148 |
format = "i2s"; |
| 149 |
cpu { |
| 150 |
sound-dai = <&audio_controller 1>; |
| 151 |
}; |
| 152 |
|
| 153 |
codec { |
| 154 |
sound-dai = <&spdif_in>; |
| 155 |
}; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
spdif_out: spdif-out { |
| 160 |
#sound-dai-cells = <0>; |
| 161 |
compatible = "linux,spdif-dit"; |
| 162 |
}; |
| 163 |
|
| 164 |
spdif_in: spdif-in { |
| 165 |
#sound-dai-cells = <0>; |
| 166 |
compatible = "linux,spdif-dir"; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
&pciec { |
| 171 |
status = "okay"; |
| 172 |
/* |
| 173 |
* The two PCIe units are accessible through |
| 174 |
* both standard PCIe slots and mini-PCIe |
| 175 |
* slots on the board. |
| 176 |
*/ |
| 177 |
pcie@1,0 { |
| 178 |
/* Port 0, Lane 0 */ |
| 179 |
status = "okay"; |
| 180 |
}; |
| 181 |
|
| 182 |
pcie@2,0 { |
| 183 |
/* Port 1, Lane 0 */ |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
&mdio { |
| 189 |
pinctrl-0 = <&mdio_pins>; |
| 190 |
pinctrl-names = "default"; |
| 191 |
phy0: ethernet-phy@0 { |
| 192 |
reg = <0>; |
| 193 |
}; |
| 194 |
|
| 195 |
phy1: ethernet-phy@1 { |
| 196 |
reg = <1>; |
| 197 |
}; |
| 198 |
}; |
| 199 |
|
| 200 |
|
| 201 |
&spi0 { |
| 202 |
pinctrl-0 = <&spi0_pins2>; |
| 203 |
pinctrl-names = "default"; |
| 204 |
status = "okay"; |
| 205 |
|
| 206 |
flash@0 { |
| 207 |
#address-cells = <1>; |
| 208 |
#size-cells = <1>; |
| 209 |
compatible = "mx25l25635e", "jedec,spi-nor"; |
| 210 |
reg = <0>; /* Chip select 0 */ |
| 211 |
spi-max-frequency = <50000000>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
&nand_controller { |
| 216 |
status = "okay"; |
| 217 |
|
| 218 |
nand@0 { |
| 219 |
reg = <0>; |
| 220 |
label = "pxa3xx_nand-0"; |
| 221 |
nand-rb = <0>; |
| 222 |
marvell,nand-keep-config; |
| 223 |
nand-on-flash-bbt; |
| 224 |
|
| 225 |
partitions { |
| 226 |
compatible = "fixed-partitions"; |
| 227 |
#address-cells = <1>; |
| 228 |
#size-cells = <1>; |
| 229 |
|
| 230 |
partition@0 { |
| 231 |
label = "U-Boot"; |
| 232 |
reg = <0 0x800000>; |
| 233 |
}; |
| 234 |
partition@800000 { |
| 235 |
label = "Linux"; |
| 236 |
reg = <0x800000 0x800000>; |
| 237 |
}; |
| 238 |
partition@1000000 { |
| 239 |
label = "Filesystem"; |
| 240 |
reg = <0x1000000 0x3f000000>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
}; |
| 244 |
}; |