| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for Marvell Armada 385 Access Point Development board |
| 4 |
* (DB-88F6820-AP) |
| 5 |
* |
| 6 |
* Copyright (C) 2014 Marvell |
| 7 |
* |
| 8 |
* Nadav Haklai <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "armada-385.dtsi" |
| 13 |
|
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Marvell Armada 385 Access Point Development Board"; |
| 18 |
compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380"; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial1:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
memory { |
| 25 |
device_type = "memory"; |
| 26 |
reg = <0x00000000 0x80000000>; /* 2GB */ |
| 27 |
}; |
| 28 |
|
| 29 |
soc { |
| 30 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| 31 |
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 |
| 32 |
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 |
| 33 |
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 |
| 34 |
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; |
| 35 |
|
| 36 |
internal-regs { |
| 37 |
i2c0: i2c@11000 { |
| 38 |
pinctrl-names = "default"; |
| 39 |
pinctrl-0 = <&i2c0_pins>; |
| 40 |
status = "okay"; |
| 41 |
|
| 42 |
/* |
| 43 |
* This bus is wired to two EEPROM |
| 44 |
* sockets, one of which holding the |
| 45 |
* board ID used by the bootloader. |
| 46 |
* Erasing this EEPROM's content will |
| 47 |
* brick the board. |
| 48 |
* Use this bus with caution. |
| 49 |
*/ |
| 50 |
}; |
| 51 |
|
| 52 |
mdio@72004 { |
| 53 |
pinctrl-names = "default"; |
| 54 |
pinctrl-0 = <&mdio_pins>; |
| 55 |
|
| 56 |
phy0: ethernet-phy@1 { |
| 57 |
reg = <1>; |
| 58 |
}; |
| 59 |
|
| 60 |
phy1: ethernet-phy@4 { |
| 61 |
reg = <4>; |
| 62 |
}; |
| 63 |
|
| 64 |
phy2: ethernet-phy@6 { |
| 65 |
reg = <6>; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
/* UART0 is exposed through the JP8 connector */ |
| 70 |
uart0: serial@12000 { |
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&uart0_pins>; |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
/* |
| 77 |
* UART1 is exposed through a FTDI chip |
| 78 |
* wired to the mini-USB connector |
| 79 |
*/ |
| 80 |
uart1: serial@12100 { |
| 81 |
pinctrl-names = "default"; |
| 82 |
pinctrl-0 = <&uart1_pins>; |
| 83 |
status = "okay"; |
| 84 |
}; |
| 85 |
|
| 86 |
pinctrl@18000 { |
| 87 |
xhci0_vbus_pins: xhci0-vbus-pins { |
| 88 |
marvell,pins = "mpp44"; |
| 89 |
marvell,function = "gpio"; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
/* CON3 */ |
| 94 |
ethernet@30000 { |
| 95 |
status = "okay"; |
| 96 |
phy = <&phy2>; |
| 97 |
phy-mode = "sgmii"; |
| 98 |
buffer-manager = <&bm>; |
| 99 |
bm,pool-long = <1>; |
| 100 |
bm,pool-short = <3>; |
| 101 |
}; |
| 102 |
|
| 103 |
/* CON2 */ |
| 104 |
ethernet@34000 { |
| 105 |
status = "okay"; |
| 106 |
phy = <&phy1>; |
| 107 |
phy-mode = "sgmii"; |
| 108 |
buffer-manager = <&bm>; |
| 109 |
bm,pool-long = <2>; |
| 110 |
bm,pool-short = <3>; |
| 111 |
}; |
| 112 |
|
| 113 |
usb@58000 { |
| 114 |
status = "okay"; |
| 115 |
}; |
| 116 |
|
| 117 |
/* CON4 */ |
| 118 |
ethernet@70000 { |
| 119 |
pinctrl-names = "default"; |
| 120 |
|
| 121 |
/* |
| 122 |
* The Reference Clock 0 is used to |
| 123 |
* provide a clock to the PHY |
| 124 |
*/ |
| 125 |
pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; |
| 126 |
status = "okay"; |
| 127 |
phy = <&phy0>; |
| 128 |
phy-mode = "rgmii-id"; |
| 129 |
buffer-manager = <&bm>; |
| 130 |
bm,pool-long = <0>; |
| 131 |
bm,pool-short = <3>; |
| 132 |
}; |
| 133 |
|
| 134 |
bm@c8000 { |
| 135 |
status = "okay"; |
| 136 |
}; |
| 137 |
|
| 138 |
usb3@f0000 { |
| 139 |
status = "okay"; |
| 140 |
usb-phy = <&usb3_phy>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
bm-bppi { |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
pcie { |
| 149 |
status = "okay"; |
| 150 |
|
| 151 |
/* |
| 152 |
* The three PCIe units are accessible through |
| 153 |
* standard mini-PCIe slots on the board. |
| 154 |
*/ |
| 155 |
pcie@1,0 { |
| 156 |
/* Port 0, Lane 0 */ |
| 157 |
status = "okay"; |
| 158 |
}; |
| 159 |
|
| 160 |
pcie@2,0 { |
| 161 |
/* Port 1, Lane 0 */ |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
pcie@3,0 { |
| 166 |
/* Port 2, Lane 0 */ |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
usb3_phy: usb3_phy { |
| 173 |
compatible = "usb-nop-xceiv"; |
| 174 |
vcc-supply = <®_xhci0_vbus>; |
| 175 |
#phy-cells = <0>; |
| 176 |
}; |
| 177 |
|
| 178 |
reg_xhci0_vbus: xhci0-vbus { |
| 179 |
compatible = "regulator-fixed"; |
| 180 |
pinctrl-names = "default"; |
| 181 |
pinctrl-0 = <&xhci0_vbus_pins>; |
| 182 |
regulator-name = "xhci0-vbus"; |
| 183 |
regulator-min-microvolt = <5000000>; |
| 184 |
regulator-max-microvolt = <5000000>; |
| 185 |
enable-active-high; |
| 186 |
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
&spi1 { |
| 191 |
pinctrl-names = "default"; |
| 192 |
pinctrl-0 = <&spi1_pins>; |
| 193 |
status = "okay"; |
| 194 |
|
| 195 |
flash@0 { |
| 196 |
#address-cells = <1>; |
| 197 |
#size-cells = <1>; |
| 198 |
compatible = "st,m25p128", "jedec,spi-nor"; |
| 199 |
reg = <0>; /* Chip select 0 */ |
| 200 |
spi-max-frequency = <54000000>; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
&nand_controller { |
| 205 |
status = "okay"; |
| 206 |
|
| 207 |
nand@0 { |
| 208 |
reg = <0>; |
| 209 |
label = "pxa3xx_nand-0"; |
| 210 |
nand-rb = <0>; |
| 211 |
nand-on-flash-bbt; |
| 212 |
nand-ecc-strength = <4>; |
| 213 |
nand-ecc-step-size = <512>; |
| 214 |
|
| 215 |
partitions { |
| 216 |
compatible = "fixed-partitions"; |
| 217 |
#address-cells = <1>; |
| 218 |
#size-cells = <1>; |
| 219 |
|
| 220 |
partition@0 { |
| 221 |
label = "U-Boot"; |
| 222 |
reg = <0x00000000 0x00800000>; |
| 223 |
read-only; |
| 224 |
}; |
| 225 |
|
| 226 |
partition@800000 { |
| 227 |
label = "uImage"; |
| 228 |
reg = <0x00800000 0x00400000>; |
| 229 |
read-only; |
| 230 |
}; |
| 231 |
|
| 232 |
partition@c00000 { |
| 233 |
label = "Root"; |
| 234 |
reg = <0x00c00000 0x3f400000>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
}; |
| 238 |
}; |