| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree Include file for Marvell Armada XP family SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Marvell |
| 6 |
* |
| 7 |
* Thomas Petazzoni <[email protected]> |
| 8 |
* |
| 9 |
* Contains definitions specific to the Armada XP MV78460 SoC that are not |
| 10 |
* common to all Armada XP SoCs. |
| 11 |
*/ |
| 12 |
|
| 13 |
#include "armada-xp.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Marvell Armada XP MV78460 SoC"; |
| 17 |
compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
gpio0 = &gpio0; |
| 21 |
gpio1 = &gpio1; |
| 22 |
gpio2 = &gpio2; |
| 23 |
}; |
| 24 |
|
| 25 |
|
| 26 |
cpus { |
| 27 |
#address-cells = <1>; |
| 28 |
#size-cells = <0>; |
| 29 |
enable-method = "marvell,armada-xp-smp"; |
| 30 |
|
| 31 |
cpu@0 { |
| 32 |
device_type = "cpu"; |
| 33 |
compatible = "marvell,sheeva-v7"; |
| 34 |
reg = <0>; |
| 35 |
clocks = <&cpuclk 0>; |
| 36 |
clock-latency = <1000000>; |
| 37 |
}; |
| 38 |
|
| 39 |
cpu@1 { |
| 40 |
device_type = "cpu"; |
| 41 |
compatible = "marvell,sheeva-v7"; |
| 42 |
reg = <1>; |
| 43 |
clocks = <&cpuclk 1>; |
| 44 |
clock-latency = <1000000>; |
| 45 |
}; |
| 46 |
|
| 47 |
cpu@2 { |
| 48 |
device_type = "cpu"; |
| 49 |
compatible = "marvell,sheeva-v7"; |
| 50 |
reg = <2>; |
| 51 |
clocks = <&cpuclk 2>; |
| 52 |
clock-latency = <1000000>; |
| 53 |
}; |
| 54 |
|
| 55 |
cpu@3 { |
| 56 |
device_type = "cpu"; |
| 57 |
compatible = "marvell,sheeva-v7"; |
| 58 |
reg = <3>; |
| 59 |
clocks = <&cpuclk 3>; |
| 60 |
clock-latency = <1000000>; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
soc { |
| 65 |
/* |
| 66 |
* MV78460 has 4 PCIe units Gen2.0: Two units can be |
| 67 |
* configured as x4 or quad x1 lanes. Two units are |
| 68 |
* x4/x1. |
| 69 |
*/ |
| 70 |
pciec: pcie@82000000 { |
| 71 |
compatible = "marvell,armada-xp-pcie"; |
| 72 |
status = "disabled"; |
| 73 |
device_type = "pci"; |
| 74 |
|
| 75 |
#address-cells = <3>; |
| 76 |
#size-cells = <2>; |
| 77 |
|
| 78 |
msi-parent = <&mpic>; |
| 79 |
bus-range = <0x00 0xff>; |
| 80 |
|
| 81 |
ranges = |
| 82 |
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ |
| 83 |
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ |
| 84 |
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ |
| 85 |
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ |
| 86 |
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ |
| 87 |
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ |
| 88 |
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ |
| 89 |
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ |
| 90 |
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ |
| 91 |
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ |
| 92 |
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
| 93 |
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ |
| 94 |
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ |
| 95 |
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ |
| 96 |
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ |
| 97 |
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ |
| 98 |
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ |
| 99 |
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ |
| 100 |
|
| 101 |
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ |
| 102 |
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ |
| 103 |
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ |
| 104 |
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ |
| 105 |
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ |
| 106 |
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ |
| 107 |
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ |
| 108 |
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ |
| 109 |
|
| 110 |
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ |
| 111 |
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ |
| 112 |
|
| 113 |
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ |
| 114 |
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; |
| 115 |
|
| 116 |
pcie1: pcie@1,0 { |
| 117 |
device_type = "pci"; |
| 118 |
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
| 119 |
reg = <0x0800 0 0 0 0>; |
| 120 |
#address-cells = <3>; |
| 121 |
#size-cells = <2>; |
| 122 |
interrupt-names = "intx"; |
| 123 |
interrupts-extended = <&mpic 58>; |
| 124 |
#interrupt-cells = <1>; |
| 125 |
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 126 |
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| 127 |
bus-range = <0x00 0xff>; |
| 128 |
interrupt-map-mask = <0 0 0 7>; |
| 129 |
interrupt-map = <0 0 0 1 &pcie1_intc 0>, |
| 130 |
<0 0 0 2 &pcie1_intc 1>, |
| 131 |
<0 0 0 3 &pcie1_intc 2>, |
| 132 |
<0 0 0 4 &pcie1_intc 3>; |
| 133 |
marvell,pcie-port = <0>; |
| 134 |
marvell,pcie-lane = <0>; |
| 135 |
clocks = <&gateclk 5>; |
| 136 |
status = "disabled"; |
| 137 |
|
| 138 |
pcie1_intc: interrupt-controller { |
| 139 |
interrupt-controller; |
| 140 |
#interrupt-cells = <1>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
pcie2: pcie@2,0 { |
| 145 |
device_type = "pci"; |
| 146 |
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; |
| 147 |
reg = <0x1000 0 0 0 0>; |
| 148 |
#address-cells = <3>; |
| 149 |
#size-cells = <2>; |
| 150 |
interrupt-names = "intx"; |
| 151 |
interrupts-extended = <&mpic 59>; |
| 152 |
#interrupt-cells = <1>; |
| 153 |
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 154 |
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| 155 |
bus-range = <0x00 0xff>; |
| 156 |
interrupt-map-mask = <0 0 0 7>; |
| 157 |
interrupt-map = <0 0 0 1 &pcie2_intc 0>, |
| 158 |
<0 0 0 2 &pcie2_intc 1>, |
| 159 |
<0 0 0 3 &pcie2_intc 2>, |
| 160 |
<0 0 0 4 &pcie2_intc 3>; |
| 161 |
marvell,pcie-port = <0>; |
| 162 |
marvell,pcie-lane = <1>; |
| 163 |
clocks = <&gateclk 6>; |
| 164 |
status = "disabled"; |
| 165 |
|
| 166 |
pcie2_intc: interrupt-controller { |
| 167 |
interrupt-controller; |
| 168 |
#interrupt-cells = <1>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
pcie3: pcie@3,0 { |
| 173 |
device_type = "pci"; |
| 174 |
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; |
| 175 |
reg = <0x1800 0 0 0 0>; |
| 176 |
#address-cells = <3>; |
| 177 |
#size-cells = <2>; |
| 178 |
interrupt-names = "intx"; |
| 179 |
interrupts-extended = <&mpic 60>; |
| 180 |
#interrupt-cells = <1>; |
| 181 |
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
| 182 |
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
| 183 |
bus-range = <0x00 0xff>; |
| 184 |
interrupt-map-mask = <0 0 0 7>; |
| 185 |
interrupt-map = <0 0 0 1 &pcie3_intc 0>, |
| 186 |
<0 0 0 2 &pcie3_intc 1>, |
| 187 |
<0 0 0 3 &pcie3_intc 2>, |
| 188 |
<0 0 0 4 &pcie3_intc 3>; |
| 189 |
marvell,pcie-port = <0>; |
| 190 |
marvell,pcie-lane = <2>; |
| 191 |
clocks = <&gateclk 7>; |
| 192 |
status = "disabled"; |
| 193 |
|
| 194 |
pcie3_intc: interrupt-controller { |
| 195 |
interrupt-controller; |
| 196 |
#interrupt-cells = <1>; |
| 197 |
}; |
| 198 |
}; |
| 199 |
|
| 200 |
pcie4: pcie@4,0 { |
| 201 |
device_type = "pci"; |
| 202 |
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; |
| 203 |
reg = <0x2000 0 0 0 0>; |
| 204 |
#address-cells = <3>; |
| 205 |
#size-cells = <2>; |
| 206 |
interrupt-names = "intx"; |
| 207 |
interrupts-extended = <&mpic 61>; |
| 208 |
#interrupt-cells = <1>; |
| 209 |
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
| 210 |
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
| 211 |
bus-range = <0x00 0xff>; |
| 212 |
interrupt-map-mask = <0 0 0 7>; |
| 213 |
interrupt-map = <0 0 0 1 &pcie4_intc 0>, |
| 214 |
<0 0 0 2 &pcie4_intc 1>, |
| 215 |
<0 0 0 3 &pcie4_intc 2>, |
| 216 |
<0 0 0 4 &pcie4_intc 3>; |
| 217 |
marvell,pcie-port = <0>; |
| 218 |
marvell,pcie-lane = <3>; |
| 219 |
clocks = <&gateclk 8>; |
| 220 |
status = "disabled"; |
| 221 |
|
| 222 |
pcie4_intc: interrupt-controller { |
| 223 |
interrupt-controller; |
| 224 |
#interrupt-cells = <1>; |
| 225 |
}; |
| 226 |
}; |
| 227 |
|
| 228 |
pcie5: pcie@5,0 { |
| 229 |
device_type = "pci"; |
| 230 |
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; |
| 231 |
reg = <0x2800 0 0 0 0>; |
| 232 |
#address-cells = <3>; |
| 233 |
#size-cells = <2>; |
| 234 |
interrupt-names = "intx"; |
| 235 |
interrupts-extended = <&mpic 62>; |
| 236 |
#interrupt-cells = <1>; |
| 237 |
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 |
| 238 |
0x81000000 0 0 0x81000000 0x5 0 1 0>; |
| 239 |
bus-range = <0x00 0xff>; |
| 240 |
interrupt-map-mask = <0 0 0 7>; |
| 241 |
interrupt-map = <0 0 0 1 &pcie5_intc 0>, |
| 242 |
<0 0 0 2 &pcie5_intc 1>, |
| 243 |
<0 0 0 3 &pcie5_intc 2>, |
| 244 |
<0 0 0 4 &pcie5_intc 3>; |
| 245 |
marvell,pcie-port = <1>; |
| 246 |
marvell,pcie-lane = <0>; |
| 247 |
clocks = <&gateclk 9>; |
| 248 |
status = "disabled"; |
| 249 |
|
| 250 |
pcie5_intc: interrupt-controller { |
| 251 |
interrupt-controller; |
| 252 |
#interrupt-cells = <1>; |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
pcie6: pcie@6,0 { |
| 257 |
device_type = "pci"; |
| 258 |
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; |
| 259 |
reg = <0x3000 0 0 0 0>; |
| 260 |
#address-cells = <3>; |
| 261 |
#size-cells = <2>; |
| 262 |
interrupt-names = "intx"; |
| 263 |
interrupts-extended = <&mpic 63>; |
| 264 |
#interrupt-cells = <1>; |
| 265 |
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 |
| 266 |
0x81000000 0 0 0x81000000 0x6 0 1 0>; |
| 267 |
bus-range = <0x00 0xff>; |
| 268 |
interrupt-map-mask = <0 0 0 7>; |
| 269 |
interrupt-map = <0 0 0 1 &pcie6_intc 0>, |
| 270 |
<0 0 0 2 &pcie6_intc 1>, |
| 271 |
<0 0 0 3 &pcie6_intc 2>, |
| 272 |
<0 0 0 4 &pcie6_intc 3>; |
| 273 |
marvell,pcie-port = <1>; |
| 274 |
marvell,pcie-lane = <1>; |
| 275 |
clocks = <&gateclk 10>; |
| 276 |
status = "disabled"; |
| 277 |
|
| 278 |
pcie6_intc: interrupt-controller { |
| 279 |
interrupt-controller; |
| 280 |
#interrupt-cells = <1>; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
pcie7: pcie@7,0 { |
| 285 |
device_type = "pci"; |
| 286 |
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; |
| 287 |
reg = <0x3800 0 0 0 0>; |
| 288 |
#address-cells = <3>; |
| 289 |
#size-cells = <2>; |
| 290 |
interrupt-names = "intx"; |
| 291 |
interrupts-extended = <&mpic 64>; |
| 292 |
#interrupt-cells = <1>; |
| 293 |
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 |
| 294 |
0x81000000 0 0 0x81000000 0x7 0 1 0>; |
| 295 |
bus-range = <0x00 0xff>; |
| 296 |
interrupt-map-mask = <0 0 0 7>; |
| 297 |
interrupt-map = <0 0 0 1 &pcie7_intc 0>, |
| 298 |
<0 0 0 2 &pcie7_intc 1>, |
| 299 |
<0 0 0 3 &pcie7_intc 2>, |
| 300 |
<0 0 0 4 &pcie7_intc 3>; |
| 301 |
marvell,pcie-port = <1>; |
| 302 |
marvell,pcie-lane = <2>; |
| 303 |
clocks = <&gateclk 11>; |
| 304 |
status = "disabled"; |
| 305 |
|
| 306 |
pcie7_intc: interrupt-controller { |
| 307 |
interrupt-controller; |
| 308 |
#interrupt-cells = <1>; |
| 309 |
}; |
| 310 |
}; |
| 311 |
|
| 312 |
pcie8: pcie@8,0 { |
| 313 |
device_type = "pci"; |
| 314 |
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; |
| 315 |
reg = <0x4000 0 0 0 0>; |
| 316 |
#address-cells = <3>; |
| 317 |
#size-cells = <2>; |
| 318 |
interrupt-names = "intx"; |
| 319 |
interrupts-extended = <&mpic 65>; |
| 320 |
#interrupt-cells = <1>; |
| 321 |
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 |
| 322 |
0x81000000 0 0 0x81000000 0x8 0 1 0>; |
| 323 |
bus-range = <0x00 0xff>; |
| 324 |
interrupt-map-mask = <0 0 0 7>; |
| 325 |
interrupt-map = <0 0 0 1 &pcie8_intc 0>, |
| 326 |
<0 0 0 2 &pcie8_intc 1>, |
| 327 |
<0 0 0 3 &pcie8_intc 2>, |
| 328 |
<0 0 0 4 &pcie8_intc 3>; |
| 329 |
marvell,pcie-port = <1>; |
| 330 |
marvell,pcie-lane = <3>; |
| 331 |
clocks = <&gateclk 12>; |
| 332 |
status = "disabled"; |
| 333 |
|
| 334 |
pcie8_intc: interrupt-controller { |
| 335 |
interrupt-controller; |
| 336 |
#interrupt-cells = <1>; |
| 337 |
}; |
| 338 |
}; |
| 339 |
|
| 340 |
pcie9: pcie@9,0 { |
| 341 |
device_type = "pci"; |
| 342 |
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; |
| 343 |
reg = <0x4800 0 0 0 0>; |
| 344 |
#address-cells = <3>; |
| 345 |
#size-cells = <2>; |
| 346 |
interrupt-names = "intx"; |
| 347 |
interrupts-extended = <&mpic 99>; |
| 348 |
#interrupt-cells = <1>; |
| 349 |
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 |
| 350 |
0x81000000 0 0 0x81000000 0x9 0 1 0>; |
| 351 |
bus-range = <0x00 0xff>; |
| 352 |
interrupt-map-mask = <0 0 0 7>; |
| 353 |
interrupt-map = <0 0 0 1 &pcie9_intc 0>, |
| 354 |
<0 0 0 2 &pcie9_intc 1>, |
| 355 |
<0 0 0 3 &pcie9_intc 2>, |
| 356 |
<0 0 0 4 &pcie9_intc 3>; |
| 357 |
marvell,pcie-port = <2>; |
| 358 |
marvell,pcie-lane = <0>; |
| 359 |
clocks = <&gateclk 26>; |
| 360 |
status = "disabled"; |
| 361 |
|
| 362 |
pcie9_intc: interrupt-controller { |
| 363 |
interrupt-controller; |
| 364 |
#interrupt-cells = <1>; |
| 365 |
}; |
| 366 |
}; |
| 367 |
|
| 368 |
pcie10: pcie@a,0 { |
| 369 |
device_type = "pci"; |
| 370 |
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; |
| 371 |
reg = <0x5000 0 0 0 0>; |
| 372 |
#address-cells = <3>; |
| 373 |
#size-cells = <2>; |
| 374 |
interrupt-names = "intx"; |
| 375 |
interrupts-extended = <&mpic 103>; |
| 376 |
#interrupt-cells = <1>; |
| 377 |
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 |
| 378 |
0x81000000 0 0 0x81000000 0xa 0 1 0>; |
| 379 |
bus-range = <0x00 0xff>; |
| 380 |
interrupt-map-mask = <0 0 0 7>; |
| 381 |
interrupt-map = <0 0 0 1 &pcie10_intc 0>, |
| 382 |
<0 0 0 2 &pcie10_intc 1>, |
| 383 |
<0 0 0 3 &pcie10_intc 2>, |
| 384 |
<0 0 0 4 &pcie10_intc 3>; |
| 385 |
marvell,pcie-port = <3>; |
| 386 |
marvell,pcie-lane = <0>; |
| 387 |
clocks = <&gateclk 27>; |
| 388 |
status = "disabled"; |
| 389 |
|
| 390 |
pcie10_intc: interrupt-controller { |
| 391 |
interrupt-controller; |
| 392 |
#interrupt-cells = <1>; |
| 393 |
}; |
| 394 |
}; |
| 395 |
}; |
| 396 |
|
| 397 |
internal-regs { |
| 398 |
gpio0: gpio@18100 { |
| 399 |
compatible = "marvell,armada-370-gpio", |
| 400 |
"marvell,orion-gpio"; |
| 401 |
reg = <0x18100 0x40>, <0x181c0 0x08>; |
| 402 |
reg-names = "gpio", "pwm"; |
| 403 |
ngpios = <32>; |
| 404 |
gpio-controller; |
| 405 |
#gpio-cells = <2>; |
| 406 |
#pwm-cells = <2>; |
| 407 |
interrupt-controller; |
| 408 |
#interrupt-cells = <2>; |
| 409 |
interrupts = <82>, <83>, <84>, <85>; |
| 410 |
clocks = <&coreclk 0>; |
| 411 |
}; |
| 412 |
|
| 413 |
gpio1: gpio@18140 { |
| 414 |
compatible = "marvell,armada-370-gpio", |
| 415 |
"marvell,orion-gpio"; |
| 416 |
reg = <0x18140 0x40>, <0x181c8 0x08>; |
| 417 |
reg-names = "gpio", "pwm"; |
| 418 |
ngpios = <32>; |
| 419 |
gpio-controller; |
| 420 |
#gpio-cells = <2>; |
| 421 |
#pwm-cells = <2>; |
| 422 |
interrupt-controller; |
| 423 |
#interrupt-cells = <2>; |
| 424 |
interrupts = <87>, <88>, <89>, <90>; |
| 425 |
clocks = <&coreclk 0>; |
| 426 |
}; |
| 427 |
|
| 428 |
gpio2: gpio@18180 { |
| 429 |
compatible = "marvell,armada-370-gpio", |
| 430 |
"marvell,orion-gpio"; |
| 431 |
reg = <0x18180 0x40>; |
| 432 |
ngpios = <3>; |
| 433 |
gpio-controller; |
| 434 |
#gpio-cells = <2>; |
| 435 |
interrupt-controller; |
| 436 |
#interrupt-cells = <2>; |
| 437 |
interrupts = <91>; |
| 438 |
}; |
| 439 |
|
| 440 |
eth3: ethernet@34000 { |
| 441 |
compatible = "marvell,armada-xp-neta"; |
| 442 |
reg = <0x34000 0x4000>; |
| 443 |
interrupts = <14>; |
| 444 |
clocks = <&gateclk 1>; |
| 445 |
status = "disabled"; |
| 446 |
}; |
| 447 |
}; |
| 448 |
}; |
| 449 |
}; |
| 450 |
|
| 451 |
&pinctrl { |
| 452 |
compatible = "marvell,mv78460-pinctrl"; |
| 453 |
}; |