| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Ctera C200 V1 Board Description |
| 4 |
* Copyright 2021-2022 Pawel Dembicki <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "kirkwood.dtsi" |
| 10 |
#include "kirkwood-6281.dtsi" |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Ctera C200 V1"; |
| 15 |
compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
| 16 |
|
| 17 |
chosen { |
| 18 |
bootargs = "console=ttyS0,115200"; |
| 19 |
stdout-path = &uart0; |
| 20 |
}; |
| 21 |
|
| 22 |
memory@0 { |
| 23 |
device_type = "memory"; |
| 24 |
reg = <0x00000000 0x20000000>; |
| 25 |
}; |
| 26 |
|
| 27 |
keys { |
| 28 |
compatible = "gpio-keys"; |
| 29 |
pinctrl-0 = <&pmx_buttons>; |
| 30 |
pinctrl-names = "default"; |
| 31 |
|
| 32 |
button-power { |
| 33 |
label = "Power Button"; |
| 34 |
linux,code = <KEY_POWER>; |
| 35 |
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; |
| 36 |
}; |
| 37 |
|
| 38 |
button-reset { |
| 39 |
label = "Reset Button"; |
| 40 |
linux,code = <KEY_RESTART>; |
| 41 |
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; |
| 42 |
}; |
| 43 |
|
| 44 |
button-usb1 { |
| 45 |
label = "USB1 Button"; |
| 46 |
linux,code = <BTN_0>; |
| 47 |
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; |
| 48 |
}; |
| 49 |
|
| 50 |
button-usb2 { |
| 51 |
label = "USB2 Button"; |
| 52 |
linux,code = <BTN_1>; |
| 53 |
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
gpio-poweroff { |
| 58 |
compatible = "gpio-poweroff"; |
| 59 |
pinctrl-0 = <&pmx_poweroff>; |
| 60 |
pinctrl-names = "default"; |
| 61 |
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| 62 |
}; |
| 63 |
|
| 64 |
leds { |
| 65 |
compatible = "gpio-leds"; |
| 66 |
pinctrl-0 = <&pmx_leds>; |
| 67 |
pinctrl-names = "default"; |
| 68 |
|
| 69 |
led-0 { |
| 70 |
function = LED_FUNCTION_DISK; |
| 71 |
function-enumerator = <2>; |
| 72 |
color = <LED_COLOR_ID_RED>; |
| 73 |
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
| 74 |
}; |
| 75 |
|
| 76 |
led-1 { |
| 77 |
function = LED_FUNCTION_DISK; |
| 78 |
function-enumerator = <1>; |
| 79 |
color = <LED_COLOR_ID_GREEN>; |
| 80 |
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; |
| 81 |
}; |
| 82 |
|
| 83 |
led-2 { |
| 84 |
function = LED_FUNCTION_DISK; |
| 85 |
function-enumerator = <2>; |
| 86 |
color = <LED_COLOR_ID_GREEN>; |
| 87 |
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; |
| 88 |
}; |
| 89 |
|
| 90 |
led-3 { |
| 91 |
function = LED_FUNCTION_DISK; |
| 92 |
function-enumerator = <1>; |
| 93 |
color = <LED_COLOR_ID_RED>; |
| 94 |
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; |
| 95 |
}; |
| 96 |
|
| 97 |
led-4 { |
| 98 |
function = LED_FUNCTION_STATUS; |
| 99 |
color = <LED_COLOR_ID_RED>; |
| 100 |
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| 101 |
}; |
| 102 |
|
| 103 |
led-5 { |
| 104 |
function = LED_FUNCTION_STATUS; |
| 105 |
color = <LED_COLOR_ID_GREEN>; |
| 106 |
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| 107 |
}; |
| 108 |
|
| 109 |
led-6 { |
| 110 |
function = LED_FUNCTION_INDICATOR; |
| 111 |
color = <LED_COLOR_ID_BLUE>; |
| 112 |
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| 113 |
}; |
| 114 |
|
| 115 |
led-7 { |
| 116 |
function = LED_FUNCTION_DISK_ERR; |
| 117 |
color = <LED_COLOR_ID_RED>; |
| 118 |
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| 119 |
}; |
| 120 |
|
| 121 |
led-8 { |
| 122 |
function = LED_FUNCTION_DISK_ERR; |
| 123 |
color = <LED_COLOR_ID_GREEN>; |
| 124 |
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| 125 |
}; |
| 126 |
|
| 127 |
led-9 { |
| 128 |
function = LED_FUNCTION_USB; |
| 129 |
function-enumerator = <1>; |
| 130 |
color = <LED_COLOR_ID_RED>; |
| 131 |
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| 132 |
}; |
| 133 |
|
| 134 |
led-10 { |
| 135 |
function = LED_FUNCTION_USB; |
| 136 |
function-enumerator = <1>; |
| 137 |
color = <LED_COLOR_ID_GREEN>; |
| 138 |
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| 139 |
linux,default-trigger = "usbport"; |
| 140 |
trigger-sources = <&hub_port2>; |
| 141 |
}; |
| 142 |
|
| 143 |
led-11 { |
| 144 |
function = LED_FUNCTION_USB; |
| 145 |
function-enumerator = <2>; |
| 146 |
color = <LED_COLOR_ID_RED>; |
| 147 |
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
| 148 |
}; |
| 149 |
|
| 150 |
led-12 { |
| 151 |
function = LED_FUNCTION_USB; |
| 152 |
function-enumerator = <2>; |
| 153 |
color = <LED_COLOR_ID_GREEN>; |
| 154 |
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| 155 |
linux,default-trigger = "usbport"; |
| 156 |
trigger-sources = <&hub_port1>; |
| 157 |
}; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
ð0 { |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
ð0port { |
| 166 |
phy-handle = <ðphy9>; |
| 167 |
}; |
| 168 |
|
| 169 |
&i2c0 { |
| 170 |
status = "okay"; |
| 171 |
|
| 172 |
rtc@30 { |
| 173 |
compatible = "s35390a"; |
| 174 |
reg = <0x30>; |
| 175 |
}; |
| 176 |
|
| 177 |
lm63@4c { |
| 178 |
compatible = "national,lm63"; |
| 179 |
reg = <0x4c>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
&mdio { |
| 184 |
status = "okay"; |
| 185 |
|
| 186 |
ethphy9: ethernet-phy@9 { |
| 187 |
reg = <9>; |
| 188 |
}; |
| 189 |
}; |
| 190 |
|
| 191 |
&nand { |
| 192 |
status = "okay"; |
| 193 |
chip-delay = <40>; |
| 194 |
|
| 195 |
partition@0 { |
| 196 |
label = "uboot"; |
| 197 |
reg = <0x0000000 0x200000>; |
| 198 |
}; |
| 199 |
|
| 200 |
partition@200000 { |
| 201 |
label = "certificate"; |
| 202 |
reg = <0x0200000 0x100000>; |
| 203 |
}; |
| 204 |
|
| 205 |
partition@300000 { |
| 206 |
label = "preset_cfg"; |
| 207 |
reg = <0x0300000 0x100000>; |
| 208 |
}; |
| 209 |
|
| 210 |
partition@400000 { |
| 211 |
label = "dev_params"; |
| 212 |
reg = <0x0400000 0x100000>; |
| 213 |
}; |
| 214 |
|
| 215 |
partition@500000 { |
| 216 |
label = "active_bank"; |
| 217 |
reg = <0x0500000 0x0100000>; |
| 218 |
}; |
| 219 |
|
| 220 |
partition@600000 { |
| 221 |
label = "magic"; |
| 222 |
reg = <0x0600000 0x0100000>; |
| 223 |
}; |
| 224 |
|
| 225 |
partition@700000 { |
| 226 |
label = "bank1"; |
| 227 |
reg = <0x0700000 0x2800000>; |
| 228 |
}; |
| 229 |
|
| 230 |
partition@2f00000 { |
| 231 |
label = "bank2"; |
| 232 |
reg = <0x2f00000 0x2800000>; |
| 233 |
}; |
| 234 |
|
| 235 |
/* 0x5700000-0x5a00000 undefined in vendor firmware */ |
| 236 |
|
| 237 |
partition@5a00000 { |
| 238 |
label = "reserved"; |
| 239 |
reg = <0x5a00000 0x2000000>; |
| 240 |
}; |
| 241 |
|
| 242 |
partition@7a00000 { |
| 243 |
label = "rootfs"; |
| 244 |
reg = <0x7a00000 0x8600000>; |
| 245 |
}; |
| 246 |
}; |
| 247 |
|
| 248 |
&pinctrl { |
| 249 |
/* Buzzer gpios are connected to two pins of buzzer. |
| 250 |
* This buzzer require a modulated signal from gpio. |
| 251 |
* Leave it as is due lack of proper driver. |
| 252 |
*/ |
| 253 |
pmx_buzzer: pmx-buzzer { |
| 254 |
marvell,pins = "mpp12", "mpp13"; |
| 255 |
marvell,function = "gpio"; |
| 256 |
}; |
| 257 |
|
| 258 |
pmx_leds: pmx-leds { |
| 259 |
marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38", |
| 260 |
"mpp39", "mpp40", "mpp42", "mpp43", "mpp44", |
| 261 |
"mpp45", "mpp46", "mpp47"; |
| 262 |
marvell,function = "gpio"; |
| 263 |
}; |
| 264 |
|
| 265 |
pmx_buttons: pmx-buttons { |
| 266 |
marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49"; |
| 267 |
marvell,function = "gpio"; |
| 268 |
}; |
| 269 |
|
| 270 |
pmx_poweroff: pmx-poweroff { |
| 271 |
marvell,pins = "mpp34"; |
| 272 |
marvell,function = "gpio"; |
| 273 |
}; |
| 274 |
}; |
| 275 |
|
| 276 |
&rtc { |
| 277 |
status = "disabled"; |
| 278 |
}; |
| 279 |
|
| 280 |
&sata { |
| 281 |
status = "okay"; |
| 282 |
nr-ports = <2>; |
| 283 |
}; |
| 284 |
|
| 285 |
&uart0 { |
| 286 |
status = "okay"; |
| 287 |
}; |
| 288 |
|
| 289 |
&usb0 { |
| 290 |
#address-cells = <1>; |
| 291 |
#size-cells = <0>; |
| 292 |
status = "okay"; |
| 293 |
|
| 294 |
port@1 { |
| 295 |
#address-cells = <1>; |
| 296 |
#size-cells = <0>; |
| 297 |
reg = <1>; |
| 298 |
#trigger-source-cells = <0>; |
| 299 |
|
| 300 |
hub_port1: port@1 { |
| 301 |
reg = <1>; |
| 302 |
#trigger-source-cells = <0>; |
| 303 |
}; |
| 304 |
|
| 305 |
hub_port2: port@2 { |
| 306 |
reg = <2>; |
| 307 |
#trigger-source-cells = <0>; |
| 308 |
}; |
| 309 |
}; |
| 310 |
}; |