| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for Marvell Armada 385 development board |
| 4 |
* (RD-88F6820-GP) |
| 5 |
* |
| 6 |
* Copyright (C) 2014 Marvell |
| 7 |
* |
| 8 |
* Gregory CLEMENT <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "armada-388.dtsi" |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Marvell Armada 388 DB-88F6820-GP"; |
| 17 |
compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial0:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
memory { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x00000000 0x80000000>; /* 2 GB */ |
| 26 |
}; |
| 27 |
|
| 28 |
soc { |
| 29 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| 30 |
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 |
| 31 |
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 |
| 32 |
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 |
| 33 |
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; |
| 34 |
|
| 35 |
internal-regs { |
| 36 |
i2c@11000 { |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = <&i2c0_pins>; |
| 39 |
status = "okay"; |
| 40 |
clock-frequency = <100000>; |
| 41 |
|
| 42 |
expander0: pca9555@20 { |
| 43 |
compatible = "nxp,pca9555"; |
| 44 |
pinctrl-names = "default"; |
| 45 |
pinctrl-0 = <&pca0_pins>; |
| 46 |
interrupt-parent = <&gpio0>; |
| 47 |
interrupts = <18 IRQ_TYPE_LEVEL_LOW>; |
| 48 |
gpio-controller; |
| 49 |
#gpio-cells = <2>; |
| 50 |
interrupt-controller; |
| 51 |
#interrupt-cells = <2>; |
| 52 |
reg = <0x20>; |
| 53 |
}; |
| 54 |
|
| 55 |
expander1: pca9555@21 { |
| 56 |
compatible = "nxp,pca9555"; |
| 57 |
pinctrl-names = "default"; |
| 58 |
interrupt-parent = <&gpio0>; |
| 59 |
interrupts = <18 IRQ_TYPE_LEVEL_LOW>; |
| 60 |
gpio-controller; |
| 61 |
#gpio-cells = <2>; |
| 62 |
interrupt-controller; |
| 63 |
#interrupt-cells = <2>; |
| 64 |
reg = <0x21>; |
| 65 |
}; |
| 66 |
|
| 67 |
eeprom@57 { |
| 68 |
compatible = "atmel,24c64"; |
| 69 |
reg = <0x57>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
serial@12000 { |
| 74 |
/* |
| 75 |
* Exported on the micro USB connector CON16 |
| 76 |
* through an FTDI |
| 77 |
*/ |
| 78 |
|
| 79 |
pinctrl-names = "default"; |
| 80 |
pinctrl-0 = <&uart0_pins>; |
| 81 |
status = "okay"; |
| 82 |
}; |
| 83 |
|
| 84 |
/* GE1 CON15 */ |
| 85 |
ethernet@30000 { |
| 86 |
pinctrl-names = "default"; |
| 87 |
pinctrl-0 = <&ge1_rgmii_pins>; |
| 88 |
status = "okay"; |
| 89 |
phy = <&phy1>; |
| 90 |
phy-mode = "rgmii-id"; |
| 91 |
buffer-manager = <&bm>; |
| 92 |
bm,pool-long = <2>; |
| 93 |
bm,pool-short = <3>; |
| 94 |
}; |
| 95 |
|
| 96 |
/* CON4 */ |
| 97 |
usb@58000 { |
| 98 |
vcc-supply = <®_usb2_0_vbus>; |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
/* GE0 CON1 */ |
| 103 |
ethernet@70000 { |
| 104 |
pinctrl-names = "default"; |
| 105 |
/* |
| 106 |
* The Reference Clock 0 is used to provide a |
| 107 |
* clock to the PHY |
| 108 |
*/ |
| 109 |
pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; |
| 110 |
status = "okay"; |
| 111 |
phy = <&phy0>; |
| 112 |
phy-mode = "rgmii-id"; |
| 113 |
buffer-manager = <&bm>; |
| 114 |
bm,pool-long = <0>; |
| 115 |
bm,pool-short = <1>; |
| 116 |
}; |
| 117 |
|
| 118 |
|
| 119 |
mdio@72004 { |
| 120 |
pinctrl-names = "default"; |
| 121 |
pinctrl-0 = <&mdio_pins>; |
| 122 |
|
| 123 |
phy0: ethernet-phy@1 { |
| 124 |
reg = <1>; |
| 125 |
}; |
| 126 |
|
| 127 |
phy1: ethernet-phy@0 { |
| 128 |
reg = <0>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
sata@a8000 { |
| 133 |
pinctrl-names = "default"; |
| 134 |
pinctrl-0 = <&sata0_pins>, <&sata1_pins>; |
| 135 |
status = "okay"; |
| 136 |
#address-cells = <1>; |
| 137 |
#size-cells = <0>; |
| 138 |
|
| 139 |
sata0: sata-port@0 { |
| 140 |
reg = <0>; |
| 141 |
target-supply = <®_5v_sata0>; |
| 142 |
}; |
| 143 |
|
| 144 |
sata1: sata-port@1 { |
| 145 |
reg = <1>; |
| 146 |
target-supply = <®_5v_sata1>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
bm@c8000 { |
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
sata@e0000 { |
| 155 |
pinctrl-names = "default"; |
| 156 |
pinctrl-0 = <&sata2_pins>, <&sata3_pins>; |
| 157 |
status = "okay"; |
| 158 |
#address-cells = <1>; |
| 159 |
#size-cells = <0>; |
| 160 |
|
| 161 |
sata2: sata-port@0 { |
| 162 |
reg = <0>; |
| 163 |
target-supply = <®_5v_sata2>; |
| 164 |
}; |
| 165 |
|
| 166 |
sata3: sata-port@1 { |
| 167 |
reg = <1>; |
| 168 |
target-supply = <®_5v_sata3>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
sdhci@d8000 { |
| 173 |
pinctrl-names = "default"; |
| 174 |
pinctrl-0 = <&sdhci_pins>; |
| 175 |
no-1-8-v; |
| 176 |
/* |
| 177 |
* A388-GP board v1.5 and higher replace |
| 178 |
* hitherto card detection method based on GPIO |
| 179 |
* with the one using DAT3 pin. As they are |
| 180 |
* incompatible, software-based polling is |
| 181 |
* enabled with 'broken-cd' property. For boards |
| 182 |
* older than v1.5 it can be replaced with: |
| 183 |
* 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;', |
| 184 |
* whereas for the newer ones following can be |
| 185 |
* used instead: |
| 186 |
* 'dat3-cd;' |
| 187 |
* 'cd-inverted;' |
| 188 |
*/ |
| 189 |
broken-cd; |
| 190 |
wp-inverted; |
| 191 |
bus-width = <8>; |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
/* CON5 */ |
| 196 |
usb3@f0000 { |
| 197 |
usb-phy = <&usb2_1_phy>; |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
/* CON7 */ |
| 202 |
usb3@f8000 { |
| 203 |
usb-phy = <&usb3_phy>; |
| 204 |
status = "okay"; |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
bm-bppi { |
| 209 |
status = "okay"; |
| 210 |
}; |
| 211 |
|
| 212 |
pcie { |
| 213 |
status = "okay"; |
| 214 |
/* |
| 215 |
* One PCIe units is accessible through |
| 216 |
* standard PCIe slot on the board. |
| 217 |
*/ |
| 218 |
pcie@1,0 { |
| 219 |
/* Port 0, Lane 0 */ |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
|
| 223 |
/* |
| 224 |
* The two other PCIe units are accessible |
| 225 |
* through mini PCIe slot on the board. |
| 226 |
*/ |
| 227 |
pcie@2,0 { |
| 228 |
/* Port 1, Lane 0 */ |
| 229 |
status = "okay"; |
| 230 |
}; |
| 231 |
pcie@3,0 { |
| 232 |
/* Port 2, Lane 0 */ |
| 233 |
status = "okay"; |
| 234 |
}; |
| 235 |
}; |
| 236 |
|
| 237 |
gpio-fan { |
| 238 |
compatible = "gpio-fan"; |
| 239 |
gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; |
| 240 |
gpio-fan,speed-map = < 0 0>, |
| 241 |
<3000 1>; |
| 242 |
}; |
| 243 |
}; |
| 244 |
|
| 245 |
usb2_1_phy: usb2_1_phy { |
| 246 |
compatible = "usb-nop-xceiv"; |
| 247 |
vcc-supply = <®_usb2_1_vbus>; |
| 248 |
#phy-cells = <0>; |
| 249 |
}; |
| 250 |
|
| 251 |
usb3_phy: usb3_phy { |
| 252 |
compatible = "usb-nop-xceiv"; |
| 253 |
vcc-supply = <®_usb3_vbus>; |
| 254 |
#phy-cells = <0>; |
| 255 |
}; |
| 256 |
|
| 257 |
reg_usb3_vbus: usb3-vbus { |
| 258 |
compatible = "regulator-fixed"; |
| 259 |
regulator-name = "usb3-vbus"; |
| 260 |
regulator-min-microvolt = <5000000>; |
| 261 |
regulator-max-microvolt = <5000000>; |
| 262 |
enable-active-high; |
| 263 |
gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; |
| 264 |
}; |
| 265 |
|
| 266 |
reg_usb2_0_vbus: v5-vbus0 { |
| 267 |
compatible = "regulator-fixed"; |
| 268 |
regulator-name = "v5.0-vbus0"; |
| 269 |
regulator-min-microvolt = <5000000>; |
| 270 |
regulator-max-microvolt = <5000000>; |
| 271 |
enable-active-high; |
| 272 |
regulator-always-on; |
| 273 |
gpio = <&expander1 14 GPIO_ACTIVE_HIGH>; |
| 274 |
}; |
| 275 |
|
| 276 |
reg_usb2_1_vbus: v5-vbus1 { |
| 277 |
compatible = "regulator-fixed"; |
| 278 |
regulator-name = "v5.0-vbus1"; |
| 279 |
regulator-min-microvolt = <5000000>; |
| 280 |
regulator-max-microvolt = <5000000>; |
| 281 |
enable-active-high; |
| 282 |
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; |
| 283 |
}; |
| 284 |
|
| 285 |
reg_sata0: pwr-sata0 { |
| 286 |
compatible = "regulator-fixed"; |
| 287 |
regulator-name = "pwr_en_sata0"; |
| 288 |
regulator-min-microvolt = <12000000>; |
| 289 |
regulator-max-microvolt = <12000000>; |
| 290 |
enable-active-high; |
| 291 |
regulator-boot-on; |
| 292 |
gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; |
| 293 |
}; |
| 294 |
|
| 295 |
reg_5v_sata0: v5-sata0 { |
| 296 |
compatible = "regulator-fixed"; |
| 297 |
regulator-name = "v5.0-sata0"; |
| 298 |
regulator-min-microvolt = <5000000>; |
| 299 |
regulator-max-microvolt = <5000000>; |
| 300 |
vin-supply = <®_sata0>; |
| 301 |
}; |
| 302 |
|
| 303 |
reg_12v_sata0: v12-sata0 { |
| 304 |
compatible = "regulator-fixed"; |
| 305 |
regulator-name = "v12.0-sata0"; |
| 306 |
regulator-min-microvolt = <12000000>; |
| 307 |
regulator-max-microvolt = <12000000>; |
| 308 |
vin-supply = <®_sata0>; |
| 309 |
}; |
| 310 |
|
| 311 |
reg_sata1: pwr-sata1 { |
| 312 |
regulator-name = "pwr_en_sata1"; |
| 313 |
compatible = "regulator-fixed"; |
| 314 |
regulator-min-microvolt = <12000000>; |
| 315 |
regulator-max-microvolt = <12000000>; |
| 316 |
enable-active-high; |
| 317 |
regulator-boot-on; |
| 318 |
gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; |
| 319 |
}; |
| 320 |
|
| 321 |
reg_5v_sata1: v5-sata1 { |
| 322 |
compatible = "regulator-fixed"; |
| 323 |
regulator-name = "v5.0-sata1"; |
| 324 |
regulator-min-microvolt = <5000000>; |
| 325 |
regulator-max-microvolt = <5000000>; |
| 326 |
vin-supply = <®_sata1>; |
| 327 |
}; |
| 328 |
|
| 329 |
reg_12v_sata1: v12-sata1 { |
| 330 |
compatible = "regulator-fixed"; |
| 331 |
regulator-name = "v12.0-sata1"; |
| 332 |
regulator-min-microvolt = <12000000>; |
| 333 |
regulator-max-microvolt = <12000000>; |
| 334 |
vin-supply = <®_sata1>; |
| 335 |
}; |
| 336 |
|
| 337 |
reg_sata2: pwr-sata2 { |
| 338 |
compatible = "regulator-fixed"; |
| 339 |
regulator-name = "pwr_en_sata2"; |
| 340 |
enable-active-high; |
| 341 |
regulator-boot-on; |
| 342 |
gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; |
| 343 |
}; |
| 344 |
|
| 345 |
reg_5v_sata2: v5-sata2 { |
| 346 |
compatible = "regulator-fixed"; |
| 347 |
regulator-name = "v5.0-sata2"; |
| 348 |
regulator-min-microvolt = <5000000>; |
| 349 |
regulator-max-microvolt = <5000000>; |
| 350 |
vin-supply = <®_sata2>; |
| 351 |
}; |
| 352 |
|
| 353 |
reg_12v_sata2: v12-sata2 { |
| 354 |
compatible = "regulator-fixed"; |
| 355 |
regulator-name = "v12.0-sata2"; |
| 356 |
regulator-min-microvolt = <12000000>; |
| 357 |
regulator-max-microvolt = <12000000>; |
| 358 |
vin-supply = <®_sata2>; |
| 359 |
}; |
| 360 |
|
| 361 |
reg_sata3: pwr-sata3 { |
| 362 |
compatible = "regulator-fixed"; |
| 363 |
regulator-name = "pwr_en_sata3"; |
| 364 |
enable-active-high; |
| 365 |
regulator-boot-on; |
| 366 |
gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; |
| 367 |
}; |
| 368 |
|
| 369 |
reg_5v_sata3: v5-sata3 { |
| 370 |
compatible = "regulator-fixed"; |
| 371 |
regulator-name = "v5.0-sata3"; |
| 372 |
regulator-min-microvolt = <5000000>; |
| 373 |
regulator-max-microvolt = <5000000>; |
| 374 |
vin-supply = <®_sata3>; |
| 375 |
}; |
| 376 |
|
| 377 |
reg_12v_sata3: v12-sata3 { |
| 378 |
compatible = "regulator-fixed"; |
| 379 |
regulator-name = "v12.0-sata3"; |
| 380 |
regulator-min-microvolt = <12000000>; |
| 381 |
regulator-max-microvolt = <12000000>; |
| 382 |
vin-supply = <®_sata3>; |
| 383 |
}; |
| 384 |
}; |
| 385 |
|
| 386 |
&pinctrl { |
| 387 |
pca0_pins: pca0_pins { |
| 388 |
marvell,pins = "mpp18"; |
| 389 |
marvell,function = "gpio"; |
| 390 |
}; |
| 391 |
}; |
| 392 |
|
| 393 |
&spi0 { |
| 394 |
pinctrl-names = "default"; |
| 395 |
pinctrl-0 = <&spi0_pins>; |
| 396 |
status = "okay"; |
| 397 |
|
| 398 |
flash@0 { |
| 399 |
#address-cells = <1>; |
| 400 |
#size-cells = <1>; |
| 401 |
compatible = "st,m25p128", "jedec,spi-nor"; |
| 402 |
reg = <0>; /* Chip select 0 */ |
| 403 |
spi-max-frequency = <50000000>; |
| 404 |
m25p,fast-read; |
| 405 |
}; |
| 406 |
}; |