| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include "kirkwood.dtsi" |
| 3 |
#include "kirkwood-6281.dtsi" |
| 4 |
|
| 5 |
/ { |
| 6 |
chosen { |
| 7 |
bootargs = "console=ttyS0,115200n8 earlyprintk"; |
| 8 |
stdout-path = &uart0; |
| 9 |
}; |
| 10 |
|
| 11 |
ocp@f1000000 { |
| 12 |
pinctrl: pin-controller@10000 { |
| 13 |
/* Non-default UART pins */ |
| 14 |
pmx_uart0: pmx-uart0 { |
| 15 |
marvell,pins = "mpp4", "mpp5"; |
| 16 |
}; |
| 17 |
|
| 18 |
pmx_power_hdd: pmx-power-hdd { |
| 19 |
marvell,pins = "mpp10"; |
| 20 |
marvell,function = "gpo"; |
| 21 |
}; |
| 22 |
pmx_usb_vbus: pmx-usb-vbus { |
| 23 |
marvell,pins = "mpp11"; |
| 24 |
marvell,function = "gpio"; |
| 25 |
}; |
| 26 |
pmx_fan_high: pmx-fan-high { |
| 27 |
marvell,pins = "mpp18"; |
| 28 |
marvell,function = "gpo"; |
| 29 |
}; |
| 30 |
pmx_fan_low: pmx-fan-low { |
| 31 |
marvell,pins = "mpp19"; |
| 32 |
marvell,function = "gpo"; |
| 33 |
}; |
| 34 |
pmx_led_function_blue: pmx-led-function-blue { |
| 35 |
marvell,pins = "mpp36"; |
| 36 |
marvell,function = "gpio"; |
| 37 |
}; |
| 38 |
pmx_led_alarm: pmx-led-alarm { |
| 39 |
marvell,pins = "mpp37"; |
| 40 |
marvell,function = "gpio"; |
| 41 |
}; |
| 42 |
pmx_led_info: pmx-led-info { |
| 43 |
marvell,pins = "mpp38"; |
| 44 |
marvell,function = "gpio"; |
| 45 |
}; |
| 46 |
pmx_led_power: pmx-led-power { |
| 47 |
marvell,pins = "mpp39"; |
| 48 |
marvell,function = "gpio"; |
| 49 |
}; |
| 50 |
pmx_fan_lock: pmx-fan-lock { |
| 51 |
marvell,pins = "mpp40"; |
| 52 |
marvell,function = "gpio"; |
| 53 |
}; |
| 54 |
pmx_button_function: pmx-button-function { |
| 55 |
marvell,pins = "mpp41"; |
| 56 |
marvell,function = "gpio"; |
| 57 |
}; |
| 58 |
pmx_power_switch: pmx-power-switch { |
| 59 |
marvell,pins = "mpp42"; |
| 60 |
marvell,function = "gpio"; |
| 61 |
}; |
| 62 |
pmx_power_auto_switch: pmx-power-auto-switch { |
| 63 |
marvell,pins = "mpp43"; |
| 64 |
marvell,function = "gpio"; |
| 65 |
}; |
| 66 |
pmx_led_function_red: pmx-led-function_red { |
| 67 |
marvell,pins = "mpp48"; |
| 68 |
marvell,function = "gpio"; |
| 69 |
}; |
| 70 |
|
| 71 |
}; |
| 72 |
sata@80000 { |
| 73 |
status = "okay"; |
| 74 |
nr-ports = <1>; |
| 75 |
}; |
| 76 |
|
| 77 |
spi@10600 { |
| 78 |
status = "okay"; |
| 79 |
|
| 80 |
m25p40@0 { |
| 81 |
#address-cells = <1>; |
| 82 |
#size-cells = <1>; |
| 83 |
compatible = "m25p40", "jedec,spi-nor"; |
| 84 |
reg = <0>; |
| 85 |
spi-max-frequency = <25000000>; |
| 86 |
mode = <0>; |
| 87 |
|
| 88 |
partition@0 { |
| 89 |
reg = <0x0 0x60000>; |
| 90 |
label = "uboot"; |
| 91 |
read-only; |
| 92 |
}; |
| 93 |
|
| 94 |
partition@60000 { |
| 95 |
reg = <0x60000 0x10000>; |
| 96 |
label = "dtb"; |
| 97 |
read-only; |
| 98 |
}; |
| 99 |
|
| 100 |
partition@70000 { |
| 101 |
reg = <0x70000 0x10000>; |
| 102 |
label = "uboot_env"; |
| 103 |
}; |
| 104 |
}; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
gpio_keys { |
| 109 |
compatible = "gpio-keys"; |
| 110 |
pinctrl-0 = <&pmx_button_function &pmx_power_switch |
| 111 |
&pmx_power_auto_switch>; |
| 112 |
pinctrl-names = "default"; |
| 113 |
|
| 114 |
button-option { |
| 115 |
label = "Function Button"; |
| 116 |
linux,code = <KEY_OPTION>; |
| 117 |
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| 118 |
}; |
| 119 |
button-reserved { |
| 120 |
label = "Power-on Switch"; |
| 121 |
linux,code = <KEY_RESERVED>; |
| 122 |
linux,input-type = <5>; |
| 123 |
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| 124 |
}; |
| 125 |
button-power { |
| 126 |
label = "Power-auto Switch"; |
| 127 |
linux,code = <KEY_ESC>; |
| 128 |
linux,input-type = <5>; |
| 129 |
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
gpio_leds { |
| 134 |
compatible = "gpio-leds"; |
| 135 |
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm |
| 136 |
&pmx_led_info &pmx_led_power |
| 137 |
&pmx_led_function_blue>; |
| 138 |
pinctrl-names = "default"; |
| 139 |
|
| 140 |
led-func-blue { |
| 141 |
label = "lsxl:blue:func"; |
| 142 |
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 143 |
}; |
| 144 |
|
| 145 |
led-alarm { |
| 146 |
label = "lsxl:red:alarm"; |
| 147 |
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| 148 |
}; |
| 149 |
|
| 150 |
led-info { |
| 151 |
label = "lsxl:amber:info"; |
| 152 |
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| 153 |
}; |
| 154 |
|
| 155 |
led-power { |
| 156 |
label = "lsxl:blue:power"; |
| 157 |
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| 158 |
default-state = "keep"; |
| 159 |
}; |
| 160 |
|
| 161 |
led-func-red { |
| 162 |
label = "lsxl:red:func"; |
| 163 |
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
gpio_fan { |
| 168 |
compatible = "gpio-fan"; |
| 169 |
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; |
| 170 |
pinctrl-names = "default"; |
| 171 |
gpios = <&gpio0 19 GPIO_ACTIVE_LOW |
| 172 |
&gpio0 18 GPIO_ACTIVE_LOW>; |
| 173 |
gpio-fan,speed-map = |
| 174 |
<0 3>, |
| 175 |
<1500 2>, |
| 176 |
<3250 1>, |
| 177 |
<5000 0>; |
| 178 |
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| 179 |
}; |
| 180 |
|
| 181 |
restart_poweroff { |
| 182 |
compatible = "restart-poweroff"; |
| 183 |
}; |
| 184 |
|
| 185 |
regulators { |
| 186 |
compatible = "simple-bus"; |
| 187 |
#address-cells = <1>; |
| 188 |
#size-cells = <0>; |
| 189 |
pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>; |
| 190 |
pinctrl-names = "default"; |
| 191 |
|
| 192 |
usb_power: regulator@1 { |
| 193 |
compatible = "regulator-fixed"; |
| 194 |
reg = <1>; |
| 195 |
regulator-name = "USB Power"; |
| 196 |
regulator-min-microvolt = <5000000>; |
| 197 |
regulator-max-microvolt = <5000000>; |
| 198 |
enable-active-high; |
| 199 |
regulator-always-on; |
| 200 |
regulator-boot-on; |
| 201 |
gpio = <&gpio0 11 0>; |
| 202 |
}; |
| 203 |
hdd_power: regulator@2 { |
| 204 |
compatible = "regulator-fixed"; |
| 205 |
reg = <2>; |
| 206 |
regulator-name = "HDD Power"; |
| 207 |
regulator-min-microvolt = <5000000>; |
| 208 |
regulator-max-microvolt = <5000000>; |
| 209 |
enable-active-high; |
| 210 |
regulator-always-on; |
| 211 |
regulator-boot-on; |
| 212 |
gpio = <&gpio0 10 0>; |
| 213 |
}; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
&mdio { |
| 218 |
status = "okay"; |
| 219 |
|
| 220 |
ethphy1: ethernet-phy@8 { |
| 221 |
reg = <8>; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
ð1 { |
| 226 |
status = "okay"; |
| 227 |
ethernet1-port@0 { |
| 228 |
phy-handle = <ðphy1>; |
| 229 |
}; |
| 230 |
}; |