| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include "dove.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "Globalscale D3Plug"; |
| 8 |
compatible = "globalscale,d3plug", "marvell,dove"; |
| 9 |
|
| 10 |
memory { |
| 11 |
device_type = "memory"; |
| 12 |
reg = <0x00000000 0x40000000>; |
| 13 |
}; |
| 14 |
|
| 15 |
chosen { |
| 16 |
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; |
| 17 |
}; |
| 18 |
|
| 19 |
leds { |
| 20 |
compatible = "gpio-leds"; |
| 21 |
pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; |
| 22 |
pinctrl-names = "default"; |
| 23 |
|
| 24 |
led-wlan-act { |
| 25 |
label = "wlan-act"; |
| 26 |
gpios = <&gpio0 0 1>; |
| 27 |
}; |
| 28 |
|
| 29 |
led-wlan-ap { |
| 30 |
label = "wlan-ap"; |
| 31 |
gpios = <&gpio0 1 1>; |
| 32 |
}; |
| 33 |
|
| 34 |
led-status { |
| 35 |
label = "status"; |
| 36 |
gpios = <&gpio0 2 1>; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
usb_power: regulator-1 { |
| 41 |
compatible = "regulator-fixed"; |
| 42 |
regulator-name = "USB Power"; |
| 43 |
regulator-min-microvolt = <5000000>; |
| 44 |
regulator-max-microvolt = <5000000>; |
| 45 |
enable-active-high; |
| 46 |
regulator-always-on; |
| 47 |
regulator-boot-on; |
| 48 |
gpio = <&gpio0 8 0>; |
| 49 |
pinctrl-0 = <&pmx_gpio_8>; |
| 50 |
pinctrl-names = "default"; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
&uart0 { status = "okay"; }; |
| 55 |
&sata0 { status = "okay"; }; |
| 56 |
&i2c0 { status = "okay"; }; |
| 57 |
|
| 58 |
/* Samsung M8G2F eMMC */ |
| 59 |
&sdio0 { |
| 60 |
status = "okay"; |
| 61 |
non-removable; |
| 62 |
bus-width = <4>; |
| 63 |
}; |
| 64 |
|
| 65 |
/* Marvell SD8787 WLAN/BT */ |
| 66 |
&sdio1 { |
| 67 |
status = "okay"; |
| 68 |
non-removable; |
| 69 |
}; |
| 70 |
|
| 71 |
&spi0 { |
| 72 |
status = "okay"; |
| 73 |
|
| 74 |
/* spi0.0: 2M Flash Macronix MX25L1605D */ |
| 75 |
flash@0 { |
| 76 |
compatible = "st,m25l1605d"; |
| 77 |
spi-max-frequency = <86000000>; |
| 78 |
reg = <0>; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
&pcie { |
| 83 |
status = "okay"; |
| 84 |
/* Fresco Logic USB3.0 xHCI controller */ |
| 85 |
pcie@1 { |
| 86 |
status = "okay"; |
| 87 |
reset-gpios = <&gpio0 26 1>; |
| 88 |
reset-delay-us = <20000>; |
| 89 |
pinctrl-0 = <&pmx_camera_gpio>; |
| 90 |
pinctrl-names = "default"; |
| 91 |
}; |
| 92 |
/* Mini-PCIe slot */ |
| 93 |
pcie@2 { |
| 94 |
status = "okay"; |
| 95 |
reset-gpios = <&gpio0 25 1>; |
| 96 |
}; |
| 97 |
}; |