| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4 |
| 4 |
* inspired by the board files made by Kevin Mihelich for ArchLinux, |
| 5 |
* and their DTS file. |
| 6 |
* |
| 7 |
* Copyright (C) 2015 Linus Walleij <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
|
| 12 |
#include "kirkwood.dtsi" |
| 13 |
#include "kirkwood-6192.dtsi" |
| 14 |
#include <dt-bindings/input/linux-event-codes.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Cloud Engines PogoPlug Series 4"; |
| 18 |
compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", |
| 19 |
"marvell,kirkwood"; |
| 20 |
|
| 21 |
memory { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x00000000 0x08000000>; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = "uart0:115200n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
gpio_keys { |
| 31 |
compatible = "gpio-keys"; |
| 32 |
pinctrl-0 = <&pmx_button_eject>; |
| 33 |
pinctrl-names = "default"; |
| 34 |
|
| 35 |
button-eject { |
| 36 |
debounce-interval = <50>; |
| 37 |
wakeup-source; |
| 38 |
linux,code = <KEY_EJECTCD>; |
| 39 |
label = "Eject Button"; |
| 40 |
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
gpio-leds { |
| 45 |
compatible = "gpio-leds"; |
| 46 |
pinctrl-0 = <&pmx_led_green &pmx_led_red>; |
| 47 |
pinctrl-names = "default"; |
| 48 |
|
| 49 |
led-health { |
| 50 |
label = "pogoplugv4:green:health"; |
| 51 |
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; |
| 52 |
default-state = "on"; |
| 53 |
}; |
| 54 |
led-fault { |
| 55 |
label = "pogoplugv4:red:fault"; |
| 56 |
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| 57 |
}; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
&pinctrl { |
| 62 |
pmx_sata0: pmx-sata0 { |
| 63 |
marvell,pins = "mpp21"; |
| 64 |
marvell,function = "sata0"; |
| 65 |
}; |
| 66 |
|
| 67 |
pmx_sata1: pmx-sata1 { |
| 68 |
marvell,pins = "mpp20"; |
| 69 |
marvell,function = "sata1"; |
| 70 |
}; |
| 71 |
|
| 72 |
pmx_sdio_cd: pmx-sdio-cd { |
| 73 |
marvell,pins = "mpp27"; |
| 74 |
marvell,function = "gpio"; |
| 75 |
}; |
| 76 |
|
| 77 |
pmx_sdio_wp: pmx-sdio-wp { |
| 78 |
marvell,pins = "mpp28"; |
| 79 |
marvell,function = "gpio"; |
| 80 |
}; |
| 81 |
|
| 82 |
pmx_button_eject: pmx-button-eject { |
| 83 |
marvell,pins = "mpp29"; |
| 84 |
marvell,function = "gpio"; |
| 85 |
}; |
| 86 |
|
| 87 |
pmx_led_green: pmx-led-green { |
| 88 |
marvell,pins = "mpp22"; |
| 89 |
marvell,function = "gpio"; |
| 90 |
}; |
| 91 |
|
| 92 |
pmx_led_red: pmx-led-red { |
| 93 |
marvell,pins = "mpp24"; |
| 94 |
marvell,function = "gpio"; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
&uart0 { |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
/* |
| 103 |
* This PCIE controller has a USB 3.0 XHCI controller at 1,0 |
| 104 |
*/ |
| 105 |
&pciec { |
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
|
| 109 |
&pcie0 { |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&sata { |
| 114 |
status = "okay"; |
| 115 |
pinctrl-0 = <&pmx_sata0 &pmx_sata1>; |
| 116 |
pinctrl-names = "default"; |
| 117 |
nr-ports = <1>; |
| 118 |
}; |
| 119 |
|
| 120 |
&sdio { |
| 121 |
status = "okay"; |
| 122 |
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; |
| 123 |
pinctrl-names = "default"; |
| 124 |
cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; |
| 125 |
wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| 126 |
}; |
| 127 |
|
| 128 |
&nand { |
| 129 |
/* 128 MiB of NAND flash */ |
| 130 |
chip-delay = <40>; |
| 131 |
status = "okay"; |
| 132 |
partitions { |
| 133 |
compatible = "fixed-partitions"; |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <1>; |
| 136 |
|
| 137 |
partition@0 { |
| 138 |
label = "u-boot"; |
| 139 |
reg = <0x00000000 0x200000>; |
| 140 |
read-only; |
| 141 |
}; |
| 142 |
|
| 143 |
partition@200000 { |
| 144 |
label = "uImage"; |
| 145 |
reg = <0x00200000 0x300000>; |
| 146 |
}; |
| 147 |
|
| 148 |
partition@500000 { |
| 149 |
label = "uImage2"; |
| 150 |
reg = <0x00500000 0x300000>; |
| 151 |
}; |
| 152 |
|
| 153 |
partition@800000 { |
| 154 |
label = "failsafe"; |
| 155 |
reg = <0x00800000 0x800000>; |
| 156 |
}; |
| 157 |
|
| 158 |
partition@1000000 { |
| 159 |
label = "root"; |
| 160 |
reg = <0x01000000 0x7000000>; |
| 161 |
}; |
| 162 |
}; |
| 163 |
}; |
| 164 |
|
| 165 |
&mdio { |
| 166 |
status = "okay"; |
| 167 |
|
| 168 |
ethphy0: ethernet-phy@0 { |
| 169 |
reg = <0>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
ð0 { |
| 174 |
status = "okay"; |
| 175 |
ethernet0-port@0 { |
| 176 |
phy-handle = <ðphy0>; |
| 177 |
}; |
| 178 |
}; |