| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* Copyright (c) 2021, Marcel Ziswiler <[email protected]> */ |
| 3 |
|
| 4 |
/dts-v1/; |
| 5 |
#include "armada-385.dtsi" |
| 6 |
#include <dt-bindings/gpio/gpio.h> |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Netgear GS110EMX"; |
| 11 |
compatible = "netgear,gs110emx", "marvell,armada380"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
/* So that mvebu u-boot can update the MAC addresses */ |
| 15 |
ethernet1 = ð0; |
| 16 |
}; |
| 17 |
|
| 18 |
chosen { |
| 19 |
stdout-path = "serial0:115200n8"; |
| 20 |
}; |
| 21 |
|
| 22 |
gpio-keys { |
| 23 |
compatible = "gpio-keys"; |
| 24 |
pinctrl-0 = <&front_button_pins>; |
| 25 |
pinctrl-names = "default"; |
| 26 |
|
| 27 |
key-factory-default { |
| 28 |
label = "Factory Default"; |
| 29 |
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| 30 |
linux,code = <KEY_RESTART>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
memory { |
| 35 |
device_type = "memory"; |
| 36 |
reg = <0x00000000 0x08000000>; /* 128 MB */ |
| 37 |
}; |
| 38 |
|
| 39 |
soc { |
| 40 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| 41 |
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 |
| 42 |
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 |
| 43 |
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 |
| 44 |
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; |
| 45 |
|
| 46 |
internal-regs { |
| 47 |
rtc@a3800 { |
| 48 |
/* |
| 49 |
* If the rtc doesn't work, run "date reset" |
| 50 |
* twice in u-boot. |
| 51 |
*/ |
| 52 |
status = "okay"; |
| 53 |
}; |
| 54 |
}; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
ð0 { |
| 59 |
/* ethernet@70000 */ |
| 60 |
bm,pool-long = <0>; |
| 61 |
bm,pool-short = <1>; |
| 62 |
buffer-manager = <&bm>; |
| 63 |
phy-mode = "rgmii-id"; |
| 64 |
pinctrl-0 = <&ge0_rgmii_pins>; |
| 65 |
pinctrl-names = "default"; |
| 66 |
status = "okay"; |
| 67 |
|
| 68 |
fixed-link { |
| 69 |
full-duplex; |
| 70 |
pause; |
| 71 |
speed = <1000>; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
&mdio { |
| 76 |
pinctrl-names = "default"; |
| 77 |
pinctrl-0 = <&mdio_pins>; |
| 78 |
status = "okay"; |
| 79 |
|
| 80 |
ethernet-switch@0 { |
| 81 |
compatible = "marvell,mv88e6190"; |
| 82 |
#interrupt-cells = <2>; |
| 83 |
interrupt-controller; |
| 84 |
interrupt-parent = <&gpio1>; |
| 85 |
interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| 86 |
pinctrl-0 = <&switch_interrupt_pins>; |
| 87 |
pinctrl-names = "default"; |
| 88 |
reg = <0>; |
| 89 |
|
| 90 |
mdio { |
| 91 |
#address-cells = <1>; |
| 92 |
#size-cells = <0>; |
| 93 |
|
| 94 |
switch0phy1: ethernet-phy@1 { |
| 95 |
reg = <0x1>; |
| 96 |
}; |
| 97 |
|
| 98 |
switch0phy2: ethernet-phy@2 { |
| 99 |
reg = <0x2>; |
| 100 |
}; |
| 101 |
|
| 102 |
switch0phy3: ethernet-phy@3 { |
| 103 |
reg = <0x3>; |
| 104 |
}; |
| 105 |
|
| 106 |
switch0phy4: ethernet-phy@4 { |
| 107 |
reg = <0x4>; |
| 108 |
}; |
| 109 |
|
| 110 |
switch0phy5: ethernet-phy@5 { |
| 111 |
reg = <0x5>; |
| 112 |
}; |
| 113 |
|
| 114 |
switch0phy6: ethernet-phy@6 { |
| 115 |
reg = <0x6>; |
| 116 |
}; |
| 117 |
|
| 118 |
switch0phy7: ethernet-phy@7 { |
| 119 |
reg = <0x7>; |
| 120 |
}; |
| 121 |
|
| 122 |
switch0phy8: ethernet-phy@8 { |
| 123 |
reg = <0x8>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
mdio-external { |
| 128 |
compatible = "marvell,mv88e6xxx-mdio-external"; |
| 129 |
#address-cells = <1>; |
| 130 |
#size-cells = <0>; |
| 131 |
|
| 132 |
phy1: ethernet-phy@b { |
| 133 |
reg = <0xb>; |
| 134 |
compatible = "ethernet-phy-ieee802.3-c45"; |
| 135 |
}; |
| 136 |
|
| 137 |
phy2: ethernet-phy@c { |
| 138 |
reg = <0xc>; |
| 139 |
compatible = "ethernet-phy-ieee802.3-c45"; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
ethernet-ports { |
| 144 |
#address-cells = <1>; |
| 145 |
#size-cells = <0>; |
| 146 |
|
| 147 |
ethernet-port@0 { |
| 148 |
ethernet = <ð0>; |
| 149 |
phy-mode = "rgmii"; |
| 150 |
reg = <0>; |
| 151 |
|
| 152 |
fixed-link { |
| 153 |
full-duplex; |
| 154 |
pause; |
| 155 |
speed = <1000>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
ethernet-port@1 { |
| 160 |
label = "lan1"; |
| 161 |
phy-handle = <&switch0phy1>; |
| 162 |
reg = <1>; |
| 163 |
}; |
| 164 |
|
| 165 |
ethernet-port@2 { |
| 166 |
label = "lan2"; |
| 167 |
phy-handle = <&switch0phy2>; |
| 168 |
reg = <2>; |
| 169 |
}; |
| 170 |
|
| 171 |
ethernet-port@3 { |
| 172 |
label = "lan3"; |
| 173 |
phy-handle = <&switch0phy3>; |
| 174 |
reg = <3>; |
| 175 |
}; |
| 176 |
|
| 177 |
ethernet-port@4 { |
| 178 |
label = "lan4"; |
| 179 |
phy-handle = <&switch0phy4>; |
| 180 |
reg = <4>; |
| 181 |
}; |
| 182 |
|
| 183 |
ethernet-port@5 { |
| 184 |
label = "lan5"; |
| 185 |
phy-handle = <&switch0phy5>; |
| 186 |
reg = <5>; |
| 187 |
}; |
| 188 |
|
| 189 |
ethernet-port@6 { |
| 190 |
label = "lan6"; |
| 191 |
phy-handle = <&switch0phy6>; |
| 192 |
reg = <6>; |
| 193 |
}; |
| 194 |
|
| 195 |
ethernet-port@7 { |
| 196 |
label = "lan7"; |
| 197 |
phy-handle = <&switch0phy7>; |
| 198 |
reg = <7>; |
| 199 |
}; |
| 200 |
|
| 201 |
ethernet-port@8 { |
| 202 |
label = "lan8"; |
| 203 |
phy-handle = <&switch0phy8>; |
| 204 |
reg = <8>; |
| 205 |
}; |
| 206 |
|
| 207 |
ethernet-port@9 { |
| 208 |
/* 88X3310P external phy */ |
| 209 |
label = "lan9"; |
| 210 |
phy-handle = <&phy1>; |
| 211 |
phy-mode = "xaui"; |
| 212 |
reg = <9>; |
| 213 |
}; |
| 214 |
|
| 215 |
ethernet-port@a { |
| 216 |
/* 88X3310P external phy */ |
| 217 |
label = "lan10"; |
| 218 |
phy-handle = <&phy2>; |
| 219 |
phy-mode = "xaui"; |
| 220 |
reg = <0xa>; |
| 221 |
}; |
| 222 |
}; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
&pinctrl { |
| 227 |
front_button_pins: front-button-pins { |
| 228 |
marvell,pins = "mpp38"; |
| 229 |
marvell,function = "gpio"; |
| 230 |
}; |
| 231 |
|
| 232 |
switch_interrupt_pins: switch-interrupt-pins { |
| 233 |
marvell,pins = "mpp39"; |
| 234 |
marvell,function = "gpio"; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
&spi0 { |
| 239 |
pinctrl-0 = <&spi0_pins>; |
| 240 |
pinctrl-names = "default"; |
| 241 |
status = "okay"; |
| 242 |
|
| 243 |
flash@0 { |
| 244 |
#address-cells = <1>; |
| 245 |
#size-cells = <1>; |
| 246 |
compatible = "jedec,spi-nor"; |
| 247 |
reg = <0>; /* Chip select 0 */ |
| 248 |
spi-max-frequency = <3000000>; |
| 249 |
|
| 250 |
partitions { |
| 251 |
compatible = "fixed-partitions"; |
| 252 |
#address-cells = <1>; |
| 253 |
#size-cells = <1>; |
| 254 |
|
| 255 |
partition@0 { |
| 256 |
label = "boot"; |
| 257 |
read-only; |
| 258 |
reg = <0x00000000 0x00100000>; |
| 259 |
}; |
| 260 |
|
| 261 |
partition@100000 { |
| 262 |
label = "env"; |
| 263 |
reg = <0x00100000 0x00010000>; |
| 264 |
}; |
| 265 |
|
| 266 |
partition@200000 { |
| 267 |
label = "rsv"; |
| 268 |
reg = <0x00110000 0x00010000>; |
| 269 |
}; |
| 270 |
|
| 271 |
partition@300000 { |
| 272 |
label = "image0"; |
| 273 |
reg = <0x00120000 0x00900000>; |
| 274 |
}; |
| 275 |
|
| 276 |
partition@400000 { |
| 277 |
label = "config"; |
| 278 |
reg = <0x00a20000 0x00300000>; |
| 279 |
}; |
| 280 |
|
| 281 |
partition@480000 { |
| 282 |
label = "debug"; |
| 283 |
reg = <0x00d20000 0x002e0000>; |
| 284 |
}; |
| 285 |
}; |
| 286 |
}; |
| 287 |
}; |
| 288 |
|
| 289 |
&uart0 { |
| 290 |
pinctrl-0 = <&uart0_pins>; |
| 291 |
pinctrl-names = "default"; |
| 292 |
status = "okay"; |
| 293 |
}; |