| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) |
| 4 |
* |
| 5 |
* Copyright (C) 2015 Russell King |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include "armada-388-clearfog.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "SolidRun Clearfog A1"; |
| 13 |
compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1", |
| 14 |
"marvell,armada388", "marvell,armada385", |
| 15 |
"marvell,armada380"; |
| 16 |
|
| 17 |
soc { |
| 18 |
internal-regs { |
| 19 |
usb3@f0000 { |
| 20 |
/* CON2, nearest CPU, USB2 only. */ |
| 21 |
status = "okay"; |
| 22 |
}; |
| 23 |
}; |
| 24 |
|
| 25 |
pcie { |
| 26 |
pcie@3,0 { |
| 27 |
/* Port 2, Lane 0. CON2, nearest CPU. */ |
| 28 |
reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; |
| 29 |
status = "okay"; |
| 30 |
}; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
gpio-keys { |
| 35 |
compatible = "gpio-keys"; |
| 36 |
pinctrl-0 = <&rear_button_pins>; |
| 37 |
pinctrl-names = "default"; |
| 38 |
|
| 39 |
button-0 { |
| 40 |
/* The rear SW3 button */ |
| 41 |
label = "Rear Button"; |
| 42 |
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| 43 |
linux,can-disable; |
| 44 |
linux,code = <BTN_0>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
ð1 { |
| 50 |
/* ethernet@30000 */ |
| 51 |
phy-mode = "1000base-x"; |
| 52 |
|
| 53 |
fixed-link { |
| 54 |
speed = <1000>; |
| 55 |
full-duplex; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
&expander0 { |
| 60 |
/* |
| 61 |
* PCA9655 GPIO expander: |
| 62 |
* 0-CON3 CLKREQ# |
| 63 |
* 1-CON3 PERST# |
| 64 |
* 2-CON2 PERST# |
| 65 |
* 3-CON3 W_DISABLE |
| 66 |
* 4-CON2 CLKREQ# |
| 67 |
* 5-USB3 overcurrent |
| 68 |
* 6-USB3 power |
| 69 |
* 7-CON2 W_DISABLE |
| 70 |
* 8-JP4 P1 |
| 71 |
* 9-JP4 P4 |
| 72 |
* 10-JP4 P5 |
| 73 |
* 11-m.2 DEVSLP |
| 74 |
* 12-SFP_LOS |
| 75 |
* 13-SFP_TX_FAULT |
| 76 |
* 14-SFP_TX_DISABLE |
| 77 |
* 15-SFP_MOD_DEF0 |
| 78 |
*/ |
| 79 |
pcie2-0-clkreq-hog { |
| 80 |
gpio-hog; |
| 81 |
gpios = <4 GPIO_ACTIVE_LOW>; |
| 82 |
input; |
| 83 |
line-name = "pcie2.0-clkreq"; |
| 84 |
}; |
| 85 |
pcie2-0-w-disable-hog { |
| 86 |
gpio-hog; |
| 87 |
gpios = <7 GPIO_ACTIVE_LOW>; |
| 88 |
output-low; |
| 89 |
line-name = "pcie2.0-w-disable"; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
&mdio { |
| 94 |
status = "okay"; |
| 95 |
|
| 96 |
ethernet-switch@4 { |
| 97 |
compatible = "marvell,mv88e6085"; |
| 98 |
reg = <4>; |
| 99 |
pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; |
| 100 |
pinctrl-names = "default"; |
| 101 |
|
| 102 |
ethernet-ports { |
| 103 |
#address-cells = <1>; |
| 104 |
#size-cells = <0>; |
| 105 |
|
| 106 |
ethernet-port@0 { |
| 107 |
reg = <0>; |
| 108 |
label = "lan5"; |
| 109 |
}; |
| 110 |
|
| 111 |
ethernet-port@1 { |
| 112 |
reg = <1>; |
| 113 |
label = "lan4"; |
| 114 |
}; |
| 115 |
|
| 116 |
ethernet-port@2 { |
| 117 |
reg = <2>; |
| 118 |
label = "lan3"; |
| 119 |
}; |
| 120 |
|
| 121 |
ethernet-port@3 { |
| 122 |
reg = <3>; |
| 123 |
label = "lan2"; |
| 124 |
}; |
| 125 |
|
| 126 |
ethernet-port@4 { |
| 127 |
reg = <4>; |
| 128 |
label = "lan1"; |
| 129 |
}; |
| 130 |
|
| 131 |
ethernet-port@5 { |
| 132 |
reg = <5>; |
| 133 |
ethernet = <ð1>; |
| 134 |
phy-mode = "1000base-x"; |
| 135 |
|
| 136 |
fixed-link { |
| 137 |
speed = <1000>; |
| 138 |
full-duplex; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
ethernet-port@6 { |
| 143 |
/* 88E1512 external phy */ |
| 144 |
reg = <6>; |
| 145 |
label = "lan6"; |
| 146 |
phy-mode = "rgmii-id"; |
| 147 |
|
| 148 |
fixed-link { |
| 149 |
speed = <1000>; |
| 150 |
full-duplex; |
| 151 |
}; |
| 152 |
}; |
| 153 |
}; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
&pinctrl { |
| 158 |
clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { |
| 159 |
marvell,pins = "mpp46"; |
| 160 |
marvell,function = "ref"; |
| 161 |
}; |
| 162 |
clearfog_dsa0_pins: clearfog-dsa0-pins { |
| 163 |
marvell,pins = "mpp23", "mpp41"; |
| 164 |
marvell,function = "gpio"; |
| 165 |
}; |
| 166 |
clearfog_spi1_cs_pins: spi1-cs-pins { |
| 167 |
marvell,pins = "mpp55"; |
| 168 |
marvell,function = "spi1"; |
| 169 |
}; |
| 170 |
rear_button_pins: rear-button-pins { |
| 171 |
marvell,pins = "mpp34"; |
| 172 |
marvell,function = "gpio"; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
&spi1 { |
| 177 |
/* |
| 178 |
* Add SPI CS pins for clearfog: |
| 179 |
* CS0: W25Q32 |
| 180 |
* CS1: |
| 181 |
* CS2: mikrobus |
| 182 |
*/ |
| 183 |
pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; |
| 184 |
}; |