| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for Lenovo Iomega ix4-300d |
| 4 |
* |
| 5 |
* Copyright (C) 2014, Benoit Masson <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include "armada-xp-mv78230.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Lenovo Iomega ix4-300d"; |
| 16 |
compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230", |
| 17 |
"marvell,armadaxp", "marvell,armada-370-xp"; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial0:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@0 { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0 0x00000000 0 0x20000000>; /* 512MB */ |
| 26 |
}; |
| 27 |
|
| 28 |
soc { |
| 29 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 |
| 30 |
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 |
| 31 |
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 |
| 32 |
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; |
| 33 |
|
| 34 |
internal-regs { |
| 35 |
serial@12000 { |
| 36 |
status = "okay"; |
| 37 |
}; |
| 38 |
|
| 39 |
ethernet@70000 { |
| 40 |
pinctrl-0 = <&ge0_rgmii_pins>; |
| 41 |
pinctrl-names = "default"; |
| 42 |
status = "okay"; |
| 43 |
phy = <&phy0>; |
| 44 |
phy-mode = "rgmii-id"; |
| 45 |
}; |
| 46 |
|
| 47 |
ethernet@74000 { |
| 48 |
pinctrl-0 = <&ge1_rgmii_pins>; |
| 49 |
pinctrl-names = "default"; |
| 50 |
status = "okay"; |
| 51 |
phy = <&phy1>; |
| 52 |
phy-mode = "rgmii-id"; |
| 53 |
}; |
| 54 |
|
| 55 |
usb@50000 { |
| 56 |
status = "okay"; |
| 57 |
}; |
| 58 |
|
| 59 |
usb@51000 { |
| 60 |
status = "okay"; |
| 61 |
}; |
| 62 |
|
| 63 |
i2c@11000 { |
| 64 |
clock-frequency = <400000>; |
| 65 |
status = "okay"; |
| 66 |
|
| 67 |
adt7473@2e { |
| 68 |
compatible = "adi,adt7473"; |
| 69 |
reg = <0x2e>; |
| 70 |
}; |
| 71 |
|
| 72 |
eeprom@50 { |
| 73 |
compatible = "atmel,24c64"; |
| 74 |
reg = <0x50>; |
| 75 |
}; |
| 76 |
|
| 77 |
pcf8563@51 { |
| 78 |
compatible = "nxp,pcf8563"; |
| 79 |
reg = <0x51>; |
| 80 |
}; |
| 81 |
|
| 82 |
}; |
| 83 |
|
| 84 |
nand-controller@d0000 { |
| 85 |
status = "okay"; |
| 86 |
|
| 87 |
nand@0 { |
| 88 |
reg = <0>; |
| 89 |
label = "pxa3xx_nand-0"; |
| 90 |
nand-rb = <0>; |
| 91 |
nand-on-flash-bbt; |
| 92 |
|
| 93 |
partitions { |
| 94 |
compatible = "fixed-partitions"; |
| 95 |
#address-cells = <1>; |
| 96 |
#size-cells = <1>; |
| 97 |
|
| 98 |
partition@0 { |
| 99 |
label = "u-boot"; |
| 100 |
reg = <0x00000000 0x000e0000>; |
| 101 |
read-only; |
| 102 |
}; |
| 103 |
|
| 104 |
partition@e0000 { |
| 105 |
label = "u-boot-env"; |
| 106 |
reg = <0x000e0000 0x00020000>; |
| 107 |
read-only; |
| 108 |
}; |
| 109 |
|
| 110 |
partition@100000 { |
| 111 |
label = "u-boot-env2"; |
| 112 |
reg = <0x00100000 0x00020000>; |
| 113 |
read-only; |
| 114 |
}; |
| 115 |
|
| 116 |
partition@120000 { |
| 117 |
label = "zImage"; |
| 118 |
reg = <0x00120000 0x00400000>; |
| 119 |
}; |
| 120 |
|
| 121 |
partition@520000 { |
| 122 |
label = "initrd"; |
| 123 |
reg = <0x00520000 0x00400000>; |
| 124 |
}; |
| 125 |
|
| 126 |
partition@e00000 { |
| 127 |
label = "boot"; |
| 128 |
reg = <0x00e00000 0x3f200000>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
}; |
| 132 |
}; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
gpio-keys { |
| 137 |
compatible = "gpio-keys"; |
| 138 |
pinctrl-0 = <&power_button_pin &reset_button_pin |
| 139 |
&select_button_pin &scroll_button_pin>; |
| 140 |
pinctrl-names = "default"; |
| 141 |
|
| 142 |
power-button { |
| 143 |
label = "Power Button"; |
| 144 |
linux,code = <KEY_POWER>; |
| 145 |
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 146 |
}; |
| 147 |
|
| 148 |
reset-button { |
| 149 |
label = "Reset Button"; |
| 150 |
linux,code = <KEY_RESTART>; |
| 151 |
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| 152 |
}; |
| 153 |
|
| 154 |
select-button { |
| 155 |
label = "Select Button"; |
| 156 |
linux,code = <BTN_SELECT>; |
| 157 |
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| 158 |
}; |
| 159 |
|
| 160 |
scroll-button { |
| 161 |
label = "Scroll Button"; |
| 162 |
linux,code = <KEY_SCROLLDOWN>; |
| 163 |
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
spi-3 { |
| 168 |
compatible = "spi-gpio"; |
| 169 |
status = "okay"; |
| 170 |
sck-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; |
| 171 |
mosi-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/ |
| 172 |
cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; |
| 173 |
num-chipselects = <1>; |
| 174 |
#address-cells = <1>; |
| 175 |
#size-cells = <0>; |
| 176 |
|
| 177 |
gpio_spi: gpio_spi@0 { |
| 178 |
compatible = "fairchild,74hc595"; |
| 179 |
gpio-controller; |
| 180 |
#gpio-cells = <2>; |
| 181 |
reg = <0>; |
| 182 |
registers-number = <1>; |
| 183 |
spi-max-frequency = <100000>; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
gpio-leds { |
| 188 |
compatible = "gpio-leds"; |
| 189 |
pinctrl-0 = <&hdd_led_pin>; |
| 190 |
pinctrl-names = "default"; |
| 191 |
|
| 192 |
hdd-led { |
| 193 |
label = "ix4-300d:hdd:blue"; |
| 194 |
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; |
| 195 |
default-state = "off"; |
| 196 |
}; |
| 197 |
|
| 198 |
power-led { |
| 199 |
label = "ix4-300d:power:white"; |
| 200 |
gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; |
| 201 |
/* init blinking while booting */ |
| 202 |
linux,default-trigger = "timer"; |
| 203 |
default-state = "on"; |
| 204 |
}; |
| 205 |
|
| 206 |
sysfail-led { |
| 207 |
label = "ix4-300d:sysfail:red"; |
| 208 |
gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>; |
| 209 |
default-state = "off"; |
| 210 |
}; |
| 211 |
|
| 212 |
sys-led { |
| 213 |
label = "ix4-300d:sys:blue"; |
| 214 |
gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>; |
| 215 |
default-state = "off"; |
| 216 |
}; |
| 217 |
|
| 218 |
hddfail-led { |
| 219 |
label = "ix4-300d:hddfail:red"; |
| 220 |
gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>; |
| 221 |
default-state = "off"; |
| 222 |
}; |
| 223 |
|
| 224 |
}; |
| 225 |
|
| 226 |
/* |
| 227 |
* Warning: you need both eth1 & 0 PHY initialized (i.e having |
| 228 |
* them up does the tweak) for poweroff to shutdown otherwise it |
| 229 |
* reboots |
| 230 |
*/ |
| 231 |
gpio-poweroff { |
| 232 |
compatible = "gpio-poweroff"; |
| 233 |
pinctrl-0 = <&poweroff_pin>; |
| 234 |
pinctrl-names = "default"; |
| 235 |
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; |
| 236 |
}; |
| 237 |
}; |
| 238 |
&pciec { |
| 239 |
status = "okay"; |
| 240 |
|
| 241 |
/* Quad port sata: Marvell 88SX7042 */ |
| 242 |
pcie@1,0 { |
| 243 |
/* Port 0, Lane 0 */ |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
/* USB 3.0 xHCI controller: NEC D720200F1 */ |
| 248 |
pcie@5,0 { |
| 249 |
/* Port 1, Lane 0 */ |
| 250 |
status = "okay"; |
| 251 |
}; |
| 252 |
}; |
| 253 |
|
| 254 |
&mdio { |
| 255 |
phy0: ethernet-phy@0 { /* Marvell 88E1318 */ |
| 256 |
reg = <0>; |
| 257 |
}; |
| 258 |
|
| 259 |
phy1: ethernet-phy@1 { /* Marvell 88E1318 */ |
| 260 |
reg = <1>; |
| 261 |
}; |
| 262 |
}; |
| 263 |
|
| 264 |
&pinctrl { |
| 265 |
poweroff_pin: poweroff-pin { |
| 266 |
marvell,pins = "mpp24"; |
| 267 |
marvell,function = "gpio"; |
| 268 |
}; |
| 269 |
|
| 270 |
power_button_pin: power-button-pin { |
| 271 |
marvell,pins = "mpp44"; |
| 272 |
marvell,function = "gpio"; |
| 273 |
}; |
| 274 |
|
| 275 |
reset_button_pin: reset-button-pin { |
| 276 |
marvell,pins = "mpp45"; |
| 277 |
marvell,function = "gpio"; |
| 278 |
}; |
| 279 |
select_button_pin: select-button-pin { |
| 280 |
marvell,pins = "mpp41"; |
| 281 |
marvell,function = "gpio"; |
| 282 |
}; |
| 283 |
|
| 284 |
scroll_button_pin: scroll-button-pin { |
| 285 |
marvell,pins = "mpp42"; |
| 286 |
marvell,function = "gpio"; |
| 287 |
}; |
| 288 |
|
| 289 |
hdd_led_pin: hdd-led-pin { |
| 290 |
marvell,pins = "mpp26"; |
| 291 |
marvell,function = "gpio"; |
| 292 |
}; |
| 293 |
}; |