| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree Include file for Marvell Armada XP family SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Marvell |
| 6 |
* |
| 7 |
* Thomas Petazzoni <[email protected]> |
| 8 |
* |
| 9 |
* Contains definitions specific to the Armada XP MV78230 SoC that are not |
| 10 |
* common to all Armada XP SoCs. |
| 11 |
*/ |
| 12 |
|
| 13 |
#include "armada-xp.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Marvell Armada XP MV78230 SoC"; |
| 17 |
compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
gpio0 = &gpio0; |
| 21 |
gpio1 = &gpio1; |
| 22 |
}; |
| 23 |
|
| 24 |
cpus { |
| 25 |
#address-cells = <1>; |
| 26 |
#size-cells = <0>; |
| 27 |
enable-method = "marvell,armada-xp-smp"; |
| 28 |
|
| 29 |
cpu@0 { |
| 30 |
device_type = "cpu"; |
| 31 |
compatible = "marvell,sheeva-v7"; |
| 32 |
reg = <0>; |
| 33 |
clocks = <&cpuclk 0>; |
| 34 |
clock-latency = <1000000>; |
| 35 |
}; |
| 36 |
|
| 37 |
cpu@1 { |
| 38 |
device_type = "cpu"; |
| 39 |
compatible = "marvell,sheeva-v7"; |
| 40 |
reg = <1>; |
| 41 |
clocks = <&cpuclk 1>; |
| 42 |
clock-latency = <1000000>; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
soc { |
| 47 |
/* |
| 48 |
* MV78230 has 2 PCIe units Gen2.0: One unit can be |
| 49 |
* configured as x4 or quad x1 lanes. One unit is |
| 50 |
* x1 only. |
| 51 |
*/ |
| 52 |
pciec: pcie@82000000 { |
| 53 |
compatible = "marvell,armada-xp-pcie"; |
| 54 |
status = "disabled"; |
| 55 |
device_type = "pci"; |
| 56 |
|
| 57 |
#address-cells = <3>; |
| 58 |
#size-cells = <2>; |
| 59 |
|
| 60 |
msi-parent = <&mpic>; |
| 61 |
bus-range = <0x00 0xff>; |
| 62 |
|
| 63 |
ranges = |
| 64 |
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ |
| 65 |
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ |
| 66 |
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ |
| 67 |
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ |
| 68 |
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ |
| 69 |
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
| 70 |
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ |
| 71 |
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ |
| 72 |
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ |
| 73 |
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ |
| 74 |
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ |
| 75 |
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ |
| 76 |
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ |
| 77 |
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ |
| 78 |
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; |
| 79 |
|
| 80 |
pcie1: pcie@1,0 { |
| 81 |
device_type = "pci"; |
| 82 |
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
| 83 |
reg = <0x0800 0 0 0 0>; |
| 84 |
#address-cells = <3>; |
| 85 |
#size-cells = <2>; |
| 86 |
interrupt-names = "intx"; |
| 87 |
interrupts-extended = <&mpic 58>; |
| 88 |
#interrupt-cells = <1>; |
| 89 |
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 90 |
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| 91 |
bus-range = <0x00 0xff>; |
| 92 |
interrupt-map-mask = <0 0 0 7>; |
| 93 |
interrupt-map = <0 0 0 1 &pcie1_intc 0>, |
| 94 |
<0 0 0 2 &pcie1_intc 1>, |
| 95 |
<0 0 0 3 &pcie1_intc 2>, |
| 96 |
<0 0 0 4 &pcie1_intc 3>; |
| 97 |
marvell,pcie-port = <0>; |
| 98 |
marvell,pcie-lane = <0>; |
| 99 |
clocks = <&gateclk 5>; |
| 100 |
status = "disabled"; |
| 101 |
|
| 102 |
pcie1_intc: interrupt-controller { |
| 103 |
interrupt-controller; |
| 104 |
#interrupt-cells = <1>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
pcie2: pcie@2,0 { |
| 109 |
device_type = "pci"; |
| 110 |
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; |
| 111 |
reg = <0x1000 0 0 0 0>; |
| 112 |
#address-cells = <3>; |
| 113 |
#size-cells = <2>; |
| 114 |
interrupt-names = "intx"; |
| 115 |
interrupts-extended = <&mpic 59>; |
| 116 |
#interrupt-cells = <1>; |
| 117 |
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 118 |
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| 119 |
bus-range = <0x00 0xff>; |
| 120 |
interrupt-map-mask = <0 0 0 7>; |
| 121 |
interrupt-map = <0 0 0 1 &pcie2_intc 0>, |
| 122 |
<0 0 0 2 &pcie2_intc 1>, |
| 123 |
<0 0 0 3 &pcie2_intc 2>, |
| 124 |
<0 0 0 4 &pcie2_intc 3>; |
| 125 |
marvell,pcie-port = <0>; |
| 126 |
marvell,pcie-lane = <1>; |
| 127 |
clocks = <&gateclk 6>; |
| 128 |
status = "disabled"; |
| 129 |
|
| 130 |
pcie2_intc: interrupt-controller { |
| 131 |
interrupt-controller; |
| 132 |
#interrupt-cells = <1>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
pcie3: pcie@3,0 { |
| 137 |
device_type = "pci"; |
| 138 |
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; |
| 139 |
reg = <0x1800 0 0 0 0>; |
| 140 |
#address-cells = <3>; |
| 141 |
#size-cells = <2>; |
| 142 |
interrupt-names = "intx"; |
| 143 |
interrupts-extended = <&mpic 60>; |
| 144 |
#interrupt-cells = <1>; |
| 145 |
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
| 146 |
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
| 147 |
bus-range = <0x00 0xff>; |
| 148 |
interrupt-map-mask = <0 0 0 7>; |
| 149 |
interrupt-map = <0 0 0 1 &pcie3_intc 0>, |
| 150 |
<0 0 0 2 &pcie3_intc 1>, |
| 151 |
<0 0 0 3 &pcie3_intc 2>, |
| 152 |
<0 0 0 4 &pcie3_intc 3>; |
| 153 |
marvell,pcie-port = <0>; |
| 154 |
marvell,pcie-lane = <2>; |
| 155 |
clocks = <&gateclk 7>; |
| 156 |
status = "disabled"; |
| 157 |
|
| 158 |
pcie3_intc: interrupt-controller { |
| 159 |
interrupt-controller; |
| 160 |
#interrupt-cells = <1>; |
| 161 |
}; |
| 162 |
}; |
| 163 |
|
| 164 |
pcie4: pcie@4,0 { |
| 165 |
device_type = "pci"; |
| 166 |
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; |
| 167 |
reg = <0x2000 0 0 0 0>; |
| 168 |
#address-cells = <3>; |
| 169 |
#size-cells = <2>; |
| 170 |
interrupt-names = "intx"; |
| 171 |
interrupts-extended = <&mpic 61>; |
| 172 |
#interrupt-cells = <1>; |
| 173 |
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
| 174 |
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
| 175 |
bus-range = <0x00 0xff>; |
| 176 |
interrupt-map-mask = <0 0 0 7>; |
| 177 |
interrupt-map = <0 0 0 1 &pcie4_intc 0>, |
| 178 |
<0 0 0 2 &pcie4_intc 1>, |
| 179 |
<0 0 0 3 &pcie4_intc 2>, |
| 180 |
<0 0 0 4 &pcie4_intc 3>; |
| 181 |
marvell,pcie-port = <0>; |
| 182 |
marvell,pcie-lane = <3>; |
| 183 |
clocks = <&gateclk 8>; |
| 184 |
status = "disabled"; |
| 185 |
|
| 186 |
pcie4_intc: interrupt-controller { |
| 187 |
interrupt-controller; |
| 188 |
#interrupt-cells = <1>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
pcie5: pcie@5,0 { |
| 193 |
device_type = "pci"; |
| 194 |
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; |
| 195 |
reg = <0x2800 0 0 0 0>; |
| 196 |
#address-cells = <3>; |
| 197 |
#size-cells = <2>; |
| 198 |
interrupt-names = "intx"; |
| 199 |
interrupts-extended = <&mpic 62>; |
| 200 |
#interrupt-cells = <1>; |
| 201 |
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 |
| 202 |
0x81000000 0 0 0x81000000 0x5 0 1 0>; |
| 203 |
bus-range = <0x00 0xff>; |
| 204 |
interrupt-map-mask = <0 0 0 7>; |
| 205 |
interrupt-map = <0 0 0 1 &pcie5_intc 0>, |
| 206 |
<0 0 0 2 &pcie5_intc 1>, |
| 207 |
<0 0 0 3 &pcie5_intc 2>, |
| 208 |
<0 0 0 4 &pcie5_intc 3>; |
| 209 |
marvell,pcie-port = <1>; |
| 210 |
marvell,pcie-lane = <0>; |
| 211 |
clocks = <&gateclk 9>; |
| 212 |
status = "disabled"; |
| 213 |
|
| 214 |
pcie5_intc: interrupt-controller { |
| 215 |
interrupt-controller; |
| 216 |
#interrupt-cells = <1>; |
| 217 |
}; |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
internal-regs { |
| 222 |
gpio0: gpio@18100 { |
| 223 |
compatible = "marvell,armada-370-gpio", |
| 224 |
"marvell,orion-gpio"; |
| 225 |
reg = <0x18100 0x40>, <0x181c0 0x08>; |
| 226 |
reg-names = "gpio", "pwm"; |
| 227 |
ngpios = <32>; |
| 228 |
gpio-controller; |
| 229 |
#gpio-cells = <2>; |
| 230 |
#pwm-cells = <2>; |
| 231 |
interrupt-controller; |
| 232 |
#interrupt-cells = <2>; |
| 233 |
interrupts = <82>, <83>, <84>, <85>; |
| 234 |
clocks = <&coreclk 0>; |
| 235 |
}; |
| 236 |
|
| 237 |
gpio1: gpio@18140 { |
| 238 |
compatible = "marvell,armada-370-gpio", |
| 239 |
"marvell,orion-gpio"; |
| 240 |
reg = <0x18140 0x40>, <0x181c8 0x08>; |
| 241 |
reg-names = "gpio", "pwm"; |
| 242 |
ngpios = <17>; |
| 243 |
gpio-controller; |
| 244 |
#gpio-cells = <2>; |
| 245 |
#pwm-cells = <2>; |
| 246 |
interrupt-controller; |
| 247 |
#interrupt-cells = <2>; |
| 248 |
interrupts = <87>, <88>, <89>; |
| 249 |
clocks = <&coreclk 0>; |
| 250 |
}; |
| 251 |
}; |
| 252 |
}; |
| 253 |
}; |
| 254 |
|
| 255 |
&pinctrl { |
| 256 |
compatible = "marvell,mv78230-pinctrl"; |
| 257 |
}; |