| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include "kirkwood.dtsi" |
| 5 |
#include "kirkwood-6281.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Seagate GoFlex Net"; |
| 9 |
compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
| 10 |
|
| 11 |
memory { |
| 12 |
device_type = "memory"; |
| 13 |
reg = <0x00000000 0x8000000>; |
| 14 |
}; |
| 15 |
|
| 16 |
chosen { |
| 17 |
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; |
| 18 |
stdout-path = &uart0; |
| 19 |
}; |
| 20 |
|
| 21 |
ocp@f1000000 { |
| 22 |
pinctrl: pin-controller@10000 { |
| 23 |
pmx_usb_power_enable: pmx-usb-power-enable { |
| 24 |
marvell,pins = "mpp29"; |
| 25 |
marvell,function = "gpio"; |
| 26 |
}; |
| 27 |
pmx_led_right_cap_0: pmx-led_right_cap_0 { |
| 28 |
marvell,pins = "mpp38"; |
| 29 |
marvell,function = "gpio"; |
| 30 |
}; |
| 31 |
pmx_led_right_cap_1: pmx-led_right_cap_1 { |
| 32 |
marvell,pins = "mpp39"; |
| 33 |
marvell,function = "gpio"; |
| 34 |
}; |
| 35 |
pmx_led_right_cap_2: pmx-led_right_cap_2 { |
| 36 |
marvell,pins = "mpp40"; |
| 37 |
marvell,function = "gpio"; |
| 38 |
}; |
| 39 |
pmx_led_right_cap_3: pmx-led_right_cap_3 { |
| 40 |
marvell,pins = "mpp41"; |
| 41 |
marvell,function = "gpio"; |
| 42 |
}; |
| 43 |
pmx_led_left_cap_0: pmx-led_left_cap_0 { |
| 44 |
marvell,pins = "mpp42"; |
| 45 |
marvell,function = "gpio"; |
| 46 |
}; |
| 47 |
pmx_led_left_cap_1: pmx-led_left_cap_1 { |
| 48 |
marvell,pins = "mpp43"; |
| 49 |
marvell,function = "gpio"; |
| 50 |
}; |
| 51 |
pmx_led_left_cap_2: pmx-led_left_cap_2 { |
| 52 |
marvell,pins = "mpp44"; |
| 53 |
marvell,function = "gpio"; |
| 54 |
}; |
| 55 |
pmx_led_left_cap_3: pmx-led_left_cap_3 { |
| 56 |
marvell,pins = "mpp45"; |
| 57 |
marvell,function = "gpio"; |
| 58 |
}; |
| 59 |
pmx_led_green: pmx-led_green { |
| 60 |
marvell,pins = "mpp46"; |
| 61 |
marvell,function = "gpio"; |
| 62 |
}; |
| 63 |
pmx_led_orange: pmx-led_orange { |
| 64 |
marvell,pins = "mpp47"; |
| 65 |
marvell,function = "gpio"; |
| 66 |
}; |
| 67 |
}; |
| 68 |
serial@12000 { |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
sata@80000 { |
| 73 |
status = "okay"; |
| 74 |
nr-ports = <2>; |
| 75 |
}; |
| 76 |
|
| 77 |
}; |
| 78 |
gpio-leds { |
| 79 |
compatible = "gpio-leds"; |
| 80 |
pinctrl-0 = < &pmx_led_orange |
| 81 |
&pmx_led_left_cap_0 &pmx_led_left_cap_1 |
| 82 |
&pmx_led_left_cap_2 &pmx_led_left_cap_3 |
| 83 |
&pmx_led_right_cap_0 &pmx_led_right_cap_1 |
| 84 |
&pmx_led_right_cap_2 &pmx_led_right_cap_3 |
| 85 |
>; |
| 86 |
pinctrl-names = "default"; |
| 87 |
|
| 88 |
led-health { |
| 89 |
label = "status:green:health"; |
| 90 |
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
| 91 |
default-state = "keep"; |
| 92 |
}; |
| 93 |
led-fault { |
| 94 |
label = "status:orange:fault"; |
| 95 |
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| 96 |
}; |
| 97 |
led-left0 { |
| 98 |
label = "status:white:left0"; |
| 99 |
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| 100 |
}; |
| 101 |
led-left1 { |
| 102 |
label = "status:white:left1"; |
| 103 |
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; |
| 104 |
}; |
| 105 |
led-left2 { |
| 106 |
label = "status:white:left2"; |
| 107 |
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 108 |
}; |
| 109 |
led-left3 { |
| 110 |
label = "status:white:left3"; |
| 111 |
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| 112 |
}; |
| 113 |
led-right0 { |
| 114 |
label = "status:white:right0"; |
| 115 |
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
| 116 |
}; |
| 117 |
led-right1 { |
| 118 |
label = "status:white:right1"; |
| 119 |
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| 120 |
}; |
| 121 |
led-right2 { |
| 122 |
label = "status:white:right2"; |
| 123 |
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| 124 |
}; |
| 125 |
led-right3 { |
| 126 |
label = "status:white:right3"; |
| 127 |
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
regulators { |
| 131 |
compatible = "simple-bus"; |
| 132 |
#address-cells = <1>; |
| 133 |
#size-cells = <0>; |
| 134 |
pinctrl-0 = <&pmx_usb_power_enable>; |
| 135 |
pinctrl-names = "default"; |
| 136 |
|
| 137 |
usb_power: regulator@1 { |
| 138 |
compatible = "regulator-fixed"; |
| 139 |
reg = <1>; |
| 140 |
regulator-name = "USB Power"; |
| 141 |
regulator-min-microvolt = <5000000>; |
| 142 |
regulator-max-microvolt = <5000000>; |
| 143 |
enable-active-high; |
| 144 |
regulator-always-on; |
| 145 |
regulator-boot-on; |
| 146 |
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
&nand { |
| 152 |
chip-delay = <40>; |
| 153 |
status = "okay"; |
| 154 |
|
| 155 |
partition@0 { |
| 156 |
label = "u-boot"; |
| 157 |
reg = <0x0000000 0x100000>; |
| 158 |
read-only; |
| 159 |
}; |
| 160 |
|
| 161 |
partition@100000 { |
| 162 |
label = "uImage"; |
| 163 |
reg = <0x0100000 0x400000>; |
| 164 |
}; |
| 165 |
|
| 166 |
partition@500000 { |
| 167 |
label = "pogoplug"; |
| 168 |
reg = <0x0500000 0x2000000>; |
| 169 |
}; |
| 170 |
|
| 171 |
partition@2500000 { |
| 172 |
label = "root"; |
| 173 |
reg = <0x02500000 0xd800000>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
&mdio { |
| 178 |
status = "okay"; |
| 179 |
|
| 180 |
ethphy0: ethernet-phy@0 { |
| 181 |
reg = <0>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
ð0 { |
| 186 |
status = "okay"; |
| 187 |
ethernet0-port@0 { |
| 188 |
phy-handle = <ðphy0>; |
| 189 |
}; |
| 190 |
}; |