| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* Device tree file for the Zyxel NSA 325 NAS box. |
| 3 |
* |
| 4 |
* Copyright (c) 2015, Hans Ulli Kroll <[email protected]> |
| 5 |
* |
| 6 |
* |
| 7 |
* Based upon the board setup file created by Peter Schildmann |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
|
| 12 |
#include "kirkwood-nsa3x0-common.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "ZyXEL NSA325"; |
| 16 |
compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; |
| 17 |
|
| 18 |
memory { |
| 19 |
device_type = "memory"; |
| 20 |
reg = <0x00000000 0x20000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
chosen { |
| 24 |
bootargs = "console=ttyS0,115200"; |
| 25 |
stdout-path = &uart0; |
| 26 |
}; |
| 27 |
|
| 28 |
ocp@f1000000 { |
| 29 |
pinctrl: pin-controller@10000 { |
| 30 |
pinctrl-names = "default"; |
| 31 |
|
| 32 |
pmx_led_hdd2_green: pmx-led-hdd2-green { |
| 33 |
marvell,pins = "mpp12"; |
| 34 |
marvell,function = "gpio"; |
| 35 |
}; |
| 36 |
|
| 37 |
pmx_led_hdd2_red: pmx-led-hdd2-red { |
| 38 |
marvell,pins = "mpp13"; |
| 39 |
marvell,function = "gpio"; |
| 40 |
}; |
| 41 |
|
| 42 |
pmx_mcu_data: pmx-mcu-data { |
| 43 |
marvell,pins = "mpp14"; |
| 44 |
marvell,function = "gpio"; |
| 45 |
}; |
| 46 |
|
| 47 |
pmx_led_usb_green: pmx-led-usb-green { |
| 48 |
marvell,pins = "mpp15"; |
| 49 |
marvell,function = "gpio"; |
| 50 |
}; |
| 51 |
|
| 52 |
pmx_mcu_clk: pmx-mcu-clk { |
| 53 |
marvell,pins = "mpp16"; |
| 54 |
marvell,function = "gpio"; |
| 55 |
}; |
| 56 |
|
| 57 |
pmx_mcu_act: pmx-mcu-act { |
| 58 |
marvell,pins = "mpp17"; |
| 59 |
marvell,function = "gpio"; |
| 60 |
}; |
| 61 |
|
| 62 |
pmx_led_sys_green: pmx-led-sys-green { |
| 63 |
marvell,pins = "mpp28"; |
| 64 |
marvell,function = "gpio"; |
| 65 |
}; |
| 66 |
|
| 67 |
pmx_led_sys_orange: pmx-led-sys-orange { |
| 68 |
marvell,pins = "mpp29"; |
| 69 |
marvell,function = "gpio"; |
| 70 |
}; |
| 71 |
|
| 72 |
pmx_led_hdd1_green: pmx-led-hdd1-green { |
| 73 |
marvell,pins = "mpp41"; |
| 74 |
marvell,function = "gpio"; |
| 75 |
}; |
| 76 |
|
| 77 |
pmx_led_hdd1_red: pmx-led-hdd1-red { |
| 78 |
marvell,pins = "mpp42"; |
| 79 |
marvell,function = "gpio"; |
| 80 |
}; |
| 81 |
|
| 82 |
pmx_htp: pmx-htp { |
| 83 |
marvell,pins = "mpp43"; |
| 84 |
marvell,function = "gpio"; |
| 85 |
}; |
| 86 |
|
| 87 |
/* |
| 88 |
* Buzzer needs to be switched at around 1kHz so is |
| 89 |
* not compatible with the gpio-beeper driver. |
| 90 |
*/ |
| 91 |
pmx_buzzer: pmx-buzzer { |
| 92 |
marvell,pins = "mpp44"; |
| 93 |
marvell,function = "gpio"; |
| 94 |
}; |
| 95 |
|
| 96 |
pmx_vid_b1: pmx-vid-b1 { |
| 97 |
marvell,pins = "mpp45"; |
| 98 |
marvell,function = "gpio"; |
| 99 |
}; |
| 100 |
|
| 101 |
pmx_power_resume_data: pmx-power-resume-data { |
| 102 |
marvell,pins = "mpp47"; |
| 103 |
marvell,function = "gpio"; |
| 104 |
}; |
| 105 |
|
| 106 |
pmx_power_resume_clk: pmx-power-resume-clk { |
| 107 |
marvell,pins = "mpp49"; |
| 108 |
marvell,function = "gpio"; |
| 109 |
}; |
| 110 |
|
| 111 |
pmx_pwr_sata1: pmx-pwr-sata1 { |
| 112 |
marvell,pins = "mpp47"; |
| 113 |
marvell,function = "gpio"; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
/* This board uses the pcf8563 RTC instead of the SoC RTC */ |
| 118 |
rtc@10300 { |
| 119 |
status = "disabled"; |
| 120 |
}; |
| 121 |
|
| 122 |
i2c@11000 { |
| 123 |
status = "okay"; |
| 124 |
|
| 125 |
pcf8563: pcf8563@51 { |
| 126 |
compatible = "nxp,pcf8563"; |
| 127 |
reg = <0x51>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
regulators { |
| 133 |
compatible = "simple-bus"; |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <0>; |
| 136 |
pinctrl-0 = <&pmx_pwr_sata1>; |
| 137 |
pinctrl-names = "default"; |
| 138 |
|
| 139 |
usb0_power: regulator@1 { |
| 140 |
enable-active-high; |
| 141 |
}; |
| 142 |
|
| 143 |
sata1_power: regulator@2 { |
| 144 |
compatible = "regulator-fixed"; |
| 145 |
reg = <2>; |
| 146 |
regulator-name = "SATA1 Power"; |
| 147 |
regulator-min-microvolt = <5000000>; |
| 148 |
regulator-max-microvolt = <5000000>; |
| 149 |
regulator-always-on; |
| 150 |
regulator-boot-on; |
| 151 |
enable-active-high; |
| 152 |
gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
gpio-leds { |
| 157 |
compatible = "gpio-leds"; |
| 158 |
pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red |
| 159 |
&pmx_led_usb_green |
| 160 |
&pmx_led_sys_green &pmx_led_sys_orange |
| 161 |
&pmx_led_copy_green &pmx_led_copy_red |
| 162 |
&pmx_led_hdd1_green &pmx_led_hdd1_red>; |
| 163 |
pinctrl-names = "default"; |
| 164 |
|
| 165 |
led-green-sys { |
| 166 |
label = "nsa325:green:sys"; |
| 167 |
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| 168 |
}; |
| 169 |
led-orange-sys { |
| 170 |
label = "nsa325:orange:sys"; |
| 171 |
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| 172 |
}; |
| 173 |
led-green-hdd1 { |
| 174 |
label = "nsa325:green:hdd1"; |
| 175 |
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| 176 |
}; |
| 177 |
led-red-hdd1 { |
| 178 |
label = "nsa325:red:hdd1"; |
| 179 |
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| 180 |
}; |
| 181 |
led-green-hdd2 { |
| 182 |
label = "nsa325:green:hdd2"; |
| 183 |
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
| 184 |
}; |
| 185 |
led-red-hdd2 { |
| 186 |
label = "nsa325:red:hdd2"; |
| 187 |
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| 188 |
}; |
| 189 |
led-green-usb { |
| 190 |
label = "nsa325:green:usb"; |
| 191 |
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; |
| 192 |
}; |
| 193 |
led-green-copy { |
| 194 |
label = "nsa325:green:copy"; |
| 195 |
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| 196 |
}; |
| 197 |
led-red-copy { |
| 198 |
label = "nsa325:red:copy"; |
| 199 |
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| 200 |
}; |
| 201 |
|
| 202 |
/* The following pins are currently not assigned to a driver, |
| 203 |
some of them should be configured as inputs. |
| 204 |
pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act |
| 205 |
&pmx_htp &pmx_vid_b1 |
| 206 |
&pmx_power_resume_data &pmx_power_resume_clk>; */ |
| 207 |
}; |
| 208 |
|
| 209 |
|
| 210 |
}; |
| 211 |
|
| 212 |
&mdio { |
| 213 |
status = "okay"; |
| 214 |
ethphy0: ethernet-phy@1 { |
| 215 |
reg = <1>; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
ð0 { |
| 220 |
status = "okay"; |
| 221 |
ethernet0-port@0 { |
| 222 |
phy-handle = <ðphy0>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
&pciec { |
| 227 |
status = "okay"; |
| 228 |
}; |
| 229 |
|
| 230 |
&pcie0 { |
| 231 |
status = "okay"; |
| 232 |
}; |