| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree Include file for Marvell Armada 385 SoC. |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Marvell |
| 6 |
* |
| 7 |
* Lior Amsalem <[email protected]> |
| 8 |
* Gregory CLEMENT <[email protected]> |
| 9 |
* Thomas Petazzoni <[email protected]> |
| 10 |
*/ |
| 11 |
|
| 12 |
#include "armada-38x.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Marvell Armada 385 family SoC"; |
| 16 |
compatible = "marvell,armada385", "marvell,armada380"; |
| 17 |
|
| 18 |
cpus { |
| 19 |
#address-cells = <1>; |
| 20 |
#size-cells = <0>; |
| 21 |
enable-method = "marvell,armada-380-smp"; |
| 22 |
|
| 23 |
cpu@0 { |
| 24 |
device_type = "cpu"; |
| 25 |
compatible = "arm,cortex-a9"; |
| 26 |
reg = <0>; |
| 27 |
}; |
| 28 |
cpu@1 { |
| 29 |
device_type = "cpu"; |
| 30 |
compatible = "arm,cortex-a9"; |
| 31 |
reg = <1>; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
soc { |
| 36 |
pciec: pcie { |
| 37 |
compatible = "marvell,armada-370-pcie"; |
| 38 |
status = "disabled"; |
| 39 |
device_type = "pci"; |
| 40 |
|
| 41 |
#address-cells = <3>; |
| 42 |
#size-cells = <2>; |
| 43 |
|
| 44 |
msi-parent = <&mpic>; |
| 45 |
bus-range = <0x00 0xff>; |
| 46 |
|
| 47 |
ranges = |
| 48 |
<0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 |
| 49 |
0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
| 50 |
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 |
| 51 |
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 |
| 52 |
0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */ |
| 53 |
0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */ |
| 54 |
0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */ |
| 55 |
0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */ |
| 56 |
0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */ |
| 57 |
0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */ |
| 58 |
0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */ |
| 59 |
0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>; |
| 60 |
|
| 61 |
/* |
| 62 |
* This port can be either x4 or x1. When |
| 63 |
* configured in x4 by the bootloader, then |
| 64 |
* pcie@4,0 is not available. |
| 65 |
*/ |
| 66 |
pcie1: pcie@1,0 { |
| 67 |
device_type = "pci"; |
| 68 |
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
| 69 |
reg = <0x0800 0 0 0 0>; |
| 70 |
#address-cells = <3>; |
| 71 |
#size-cells = <2>; |
| 72 |
interrupt-names = "intx"; |
| 73 |
interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 74 |
#interrupt-cells = <1>; |
| 75 |
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 76 |
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| 77 |
bus-range = <0x00 0xff>; |
| 78 |
interrupt-map-mask = <0 0 0 7>; |
| 79 |
interrupt-map = <0 0 0 1 &pcie1_intc 0>, |
| 80 |
<0 0 0 2 &pcie1_intc 1>, |
| 81 |
<0 0 0 3 &pcie1_intc 2>, |
| 82 |
<0 0 0 4 &pcie1_intc 3>; |
| 83 |
marvell,pcie-port = <0>; |
| 84 |
marvell,pcie-lane = <0>; |
| 85 |
clocks = <&gateclk 8>; |
| 86 |
status = "disabled"; |
| 87 |
pcie1_intc: interrupt-controller { |
| 88 |
interrupt-controller; |
| 89 |
#interrupt-cells = <1>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
/* x1 port */ |
| 94 |
pcie2: pcie@2,0 { |
| 95 |
device_type = "pci"; |
| 96 |
assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; |
| 97 |
reg = <0x1000 0 0 0 0>; |
| 98 |
#address-cells = <3>; |
| 99 |
#size-cells = <2>; |
| 100 |
interrupt-names = "intx"; |
| 101 |
interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 102 |
#interrupt-cells = <1>; |
| 103 |
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 104 |
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| 105 |
bus-range = <0x00 0xff>; |
| 106 |
interrupt-map-mask = <0 0 0 7>; |
| 107 |
interrupt-map = <0 0 0 1 &pcie2_intc 0>, |
| 108 |
<0 0 0 2 &pcie2_intc 1>, |
| 109 |
<0 0 0 3 &pcie2_intc 2>, |
| 110 |
<0 0 0 4 &pcie2_intc 3>; |
| 111 |
marvell,pcie-port = <1>; |
| 112 |
marvell,pcie-lane = <0>; |
| 113 |
clocks = <&gateclk 5>; |
| 114 |
status = "disabled"; |
| 115 |
pcie2_intc: interrupt-controller { |
| 116 |
interrupt-controller; |
| 117 |
#interrupt-cells = <1>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
/* x1 port */ |
| 122 |
pcie3: pcie@3,0 { |
| 123 |
device_type = "pci"; |
| 124 |
assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; |
| 125 |
reg = <0x1800 0 0 0 0>; |
| 126 |
#address-cells = <3>; |
| 127 |
#size-cells = <2>; |
| 128 |
interrupt-names = "intx"; |
| 129 |
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| 130 |
#interrupt-cells = <1>; |
| 131 |
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
| 132 |
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
| 133 |
bus-range = <0x00 0xff>; |
| 134 |
interrupt-map-mask = <0 0 0 7>; |
| 135 |
interrupt-map = <0 0 0 1 &pcie3_intc 0>, |
| 136 |
<0 0 0 2 &pcie3_intc 1>, |
| 137 |
<0 0 0 3 &pcie3_intc 2>, |
| 138 |
<0 0 0 4 &pcie3_intc 3>; |
| 139 |
marvell,pcie-port = <2>; |
| 140 |
marvell,pcie-lane = <0>; |
| 141 |
clocks = <&gateclk 6>; |
| 142 |
status = "disabled"; |
| 143 |
pcie3_intc: interrupt-controller { |
| 144 |
interrupt-controller; |
| 145 |
#interrupt-cells = <1>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
|
| 149 |
/* |
| 150 |
* x1 port only available when pcie@1,0 is |
| 151 |
* configured as a x1 port |
| 152 |
*/ |
| 153 |
pcie4: pcie@4,0 { |
| 154 |
device_type = "pci"; |
| 155 |
assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; |
| 156 |
reg = <0x2000 0 0 0 0>; |
| 157 |
#address-cells = <3>; |
| 158 |
#size-cells = <2>; |
| 159 |
interrupt-names = "intx"; |
| 160 |
interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 161 |
#interrupt-cells = <1>; |
| 162 |
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
| 163 |
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
| 164 |
bus-range = <0x00 0xff>; |
| 165 |
interrupt-map-mask = <0 0 0 7>; |
| 166 |
interrupt-map = <0 0 0 1 &pcie4_intc 0>, |
| 167 |
<0 0 0 2 &pcie4_intc 1>, |
| 168 |
<0 0 0 3 &pcie4_intc 2>, |
| 169 |
<0 0 0 4 &pcie4_intc 3>; |
| 170 |
marvell,pcie-port = <3>; |
| 171 |
marvell,pcie-lane = <0>; |
| 172 |
clocks = <&gateclk 7>; |
| 173 |
status = "disabled"; |
| 174 |
pcie4_intc: interrupt-controller { |
| 175 |
interrupt-controller; |
| 176 |
#interrupt-cells = <1>; |
| 177 |
}; |
| 178 |
}; |
| 179 |
}; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
&pinctrl { |
| 184 |
compatible = "marvell,mv88f6820-pinctrl"; |
| 185 |
}; |