| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for D-Link DNS-327L |
| 4 |
* |
| 5 |
* Copyright (C) 2015, Andrew Andrianov <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/* Remaining unsolved: |
| 9 |
* There's still some unknown device on i2c address 0x13 |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
|
| 14 |
#include <dt-bindings/input/input.h> |
| 15 |
#include <dt-bindings/gpio/gpio.h> |
| 16 |
#include "armada-370.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "D-Link DNS-327L"; |
| 20 |
compatible = "dlink,dns327l", |
| 21 |
"marvell,armada370", |
| 22 |
"marvell,armada-370-xp"; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = &uart0; |
| 26 |
}; |
| 27 |
|
| 28 |
memory@0 { |
| 29 |
device_type = "memory"; |
| 30 |
reg = <0x00000000 0x20000000>; /* 512 MiB */ |
| 31 |
}; |
| 32 |
|
| 33 |
soc { |
| 34 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 |
| 35 |
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 |
| 36 |
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; |
| 37 |
|
| 38 |
internal-regs { |
| 39 |
sata@a0000 { |
| 40 |
nr-ports = <2>; |
| 41 |
status = "okay"; |
| 42 |
}; |
| 43 |
|
| 44 |
usb@50000 { |
| 45 |
status = "okay"; |
| 46 |
}; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
gpio-keys { |
| 51 |
compatible = "gpio-keys"; |
| 52 |
pinctrl-0 = < |
| 53 |
&backup_button_pin |
| 54 |
&power_button_pin |
| 55 |
&reset_button_pin>; |
| 56 |
pinctrl-names = "default"; |
| 57 |
|
| 58 |
power-button { |
| 59 |
label = "Power Button"; |
| 60 |
linux,code = <KEY_POWER>; |
| 61 |
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; |
| 62 |
}; |
| 63 |
|
| 64 |
backup-button { |
| 65 |
label = "Backup Button"; |
| 66 |
linux,code = <KEY_COPY>; |
| 67 |
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; |
| 68 |
}; |
| 69 |
|
| 70 |
reset-button { |
| 71 |
label = "Reset Button"; |
| 72 |
linux,code = <KEY_RESTART>; |
| 73 |
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
gpio-leds { |
| 78 |
compatible = "gpio-leds"; |
| 79 |
pinctrl-0 = < |
| 80 |
&sata_l_amber_pin |
| 81 |
&sata_r_amber_pin |
| 82 |
&backup_led_pin |
| 83 |
/* Ensure these are managed by hardware */ |
| 84 |
&sata_l_white_pin |
| 85 |
&sata_r_white_pin>; |
| 86 |
|
| 87 |
pinctrl-names = "default"; |
| 88 |
|
| 89 |
led-sata-r-amber { |
| 90 |
label = "dns327l:amber:sata-r"; |
| 91 |
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| 92 |
default-state = "keep"; |
| 93 |
}; |
| 94 |
|
| 95 |
led-sata-l-amber { |
| 96 |
label = "dns327l:amber:sata-l"; |
| 97 |
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| 98 |
default-state = "keep"; |
| 99 |
}; |
| 100 |
|
| 101 |
led-backup { |
| 102 |
label = "dns327l:white:usb"; |
| 103 |
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; |
| 104 |
default-state = "keep"; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
usb_power: regulator-1 { |
| 109 |
compatible = "regulator-fixed"; |
| 110 |
pinctrl-0 = <&xhci_pwr_pin>; |
| 111 |
pinctrl-names = "default"; |
| 112 |
regulator-name = "USB3.0 Port Power"; |
| 113 |
regulator-min-microvolt = <5000000>; |
| 114 |
regulator-max-microvolt = <5000000>; |
| 115 |
enable-active-high; |
| 116 |
regulator-boot-on; |
| 117 |
regulator-always-on; |
| 118 |
gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| 119 |
}; |
| 120 |
|
| 121 |
sata_r_power: regulator-2 { |
| 122 |
compatible = "regulator-fixed"; |
| 123 |
pinctrl-0 = <&sata_r_pwr_pin>; |
| 124 |
pinctrl-names = "default"; |
| 125 |
regulator-name = "SATA-R Power"; |
| 126 |
regulator-min-microvolt = <5000000>; |
| 127 |
regulator-max-microvolt = <5000000>; |
| 128 |
startup-delay-us = <2000000>; |
| 129 |
enable-active-high; |
| 130 |
regulator-always-on; |
| 131 |
regulator-boot-on; |
| 132 |
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; |
| 133 |
}; |
| 134 |
|
| 135 |
sata_l_power: regulator-3 { |
| 136 |
compatible = "regulator-fixed"; |
| 137 |
pinctrl-0 = <&sata_l_pwr_pin>; |
| 138 |
pinctrl-names = "default"; |
| 139 |
regulator-name = "SATA-L Power"; |
| 140 |
regulator-min-microvolt = <5000000>; |
| 141 |
regulator-max-microvolt = <5000000>; |
| 142 |
startup-delay-us = <4000000>; |
| 143 |
enable-active-high; |
| 144 |
regulator-always-on; |
| 145 |
regulator-boot-on; |
| 146 |
gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
&pciec { |
| 151 |
status = "okay"; |
| 152 |
|
| 153 |
pcie@1,0 { |
| 154 |
/* Port 0, Lane 0 */ |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
pcie@2,0 { |
| 159 |
/* Port 1, Lane 0 */ |
| 160 |
status = "okay"; |
| 161 |
}; |
| 162 |
}; |
| 163 |
|
| 164 |
&pinctrl { |
| 165 |
sata_l_white_pin: sata-l-white-pin { |
| 166 |
marvell,pins = "mpp57"; |
| 167 |
marvell,function = "sata0"; |
| 168 |
}; |
| 169 |
|
| 170 |
sata_r_white_pin: sata-r-white-pin { |
| 171 |
marvell,pins = "mpp55"; |
| 172 |
marvell,function = "sata1"; |
| 173 |
}; |
| 174 |
|
| 175 |
sata_r_amber_pin: sata-r-amber-pin { |
| 176 |
marvell,pins = "mpp52"; |
| 177 |
marvell,function = "gpio"; |
| 178 |
}; |
| 179 |
|
| 180 |
sata_l_amber_pin: sata-l-amber-pin { |
| 181 |
marvell,pins = "mpp53"; |
| 182 |
marvell,function = "gpio"; |
| 183 |
}; |
| 184 |
|
| 185 |
backup_led_pin: backup-led-pin { |
| 186 |
marvell,pins = "mpp61"; |
| 187 |
marvell,function = "gpo"; |
| 188 |
}; |
| 189 |
|
| 190 |
xhci_pwr_pin: xhci-pwr-pin { |
| 191 |
marvell,pins = "mpp13"; |
| 192 |
marvell,function = "gpio"; |
| 193 |
}; |
| 194 |
|
| 195 |
sata_r_pwr_pin: sata-r-pwr-pin { |
| 196 |
marvell,pins = "mpp54"; |
| 197 |
marvell,function = "gpio"; |
| 198 |
}; |
| 199 |
|
| 200 |
sata_l_pwr_pin: sata-l-pwr-pin { |
| 201 |
marvell,pins = "mpp56"; |
| 202 |
marvell,function = "gpio"; |
| 203 |
}; |
| 204 |
|
| 205 |
uart1_pins: uart1-pins { |
| 206 |
marvell,pins = "mpp60", "mpp61"; |
| 207 |
marvell,function = "uart1"; |
| 208 |
}; |
| 209 |
|
| 210 |
power_button_pin: power-button-pin { |
| 211 |
marvell,pins = "mpp65"; |
| 212 |
marvell,function = "gpio"; |
| 213 |
}; |
| 214 |
|
| 215 |
backup_button_pin: backup-button-pin { |
| 216 |
marvell,pins = "mpp63"; |
| 217 |
marvell,function = "gpio"; |
| 218 |
}; |
| 219 |
|
| 220 |
reset_button_pin: reset-button-pin { |
| 221 |
marvell,pins = "mpp64"; |
| 222 |
marvell,function = "gpio"; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
/* Serial console */ |
| 227 |
&uart0 { |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
/* Connected to Weltrend MCU */ |
| 232 |
&uart1 { |
| 233 |
pinctrl-0 = <&uart1_pins>; |
| 234 |
pinctrl-names = "default"; |
| 235 |
status = "okay"; |
| 236 |
}; |
| 237 |
|
| 238 |
&mdio { |
| 239 |
phy0: ethernet-phy@0 { /* Marvell 88E1318 */ |
| 240 |
reg = <0>; |
| 241 |
marvell,reg-init = <0x2 0x19 0x0 0x0077>, |
| 242 |
<0x2 0x18 0x0 0x5747>; |
| 243 |
}; |
| 244 |
}; |
| 245 |
|
| 246 |
ð1 { |
| 247 |
phy = <&phy0>; |
| 248 |
phy-mode = "rgmii-id"; |
| 249 |
status = "okay"; |
| 250 |
}; |
| 251 |
|
| 252 |
&i2c0 { |
| 253 |
compatible = "marvell,mv64xxx-i2c"; |
| 254 |
clock-frequency = <100000>; |
| 255 |
status = "okay"; |
| 256 |
}; |
| 257 |
|
| 258 |
&nand_controller { |
| 259 |
status = "okay"; |
| 260 |
|
| 261 |
nand@0 { |
| 262 |
reg = <0>; |
| 263 |
label = "pxa3xx_nand-0"; |
| 264 |
nand-rb = <0>; |
| 265 |
marvell,nand-keep-config; |
| 266 |
nand-on-flash-bbt; |
| 267 |
nand-ecc-strength = <4>; |
| 268 |
nand-ecc-step-size = <512>; |
| 269 |
|
| 270 |
partitions { |
| 271 |
compatible = "fixed-partitions"; |
| 272 |
#address-cells = <1>; |
| 273 |
#size-cells = <1>; |
| 274 |
|
| 275 |
partition@0 { |
| 276 |
label = "u-boot"; |
| 277 |
/* 1.0 MiB */ |
| 278 |
reg = <0x0000000 0x100000>; |
| 279 |
read-only; |
| 280 |
}; |
| 281 |
|
| 282 |
partition@100000 { |
| 283 |
label = "u-boot-env"; |
| 284 |
/* 128 KiB */ |
| 285 |
reg = <0x100000 0x20000>; |
| 286 |
read-only; |
| 287 |
}; |
| 288 |
|
| 289 |
partition@120000 { |
| 290 |
label = "uImage"; |
| 291 |
/* 7 MiB */ |
| 292 |
reg = <0x120000 0x700000>; |
| 293 |
}; |
| 294 |
|
| 295 |
partition@820000 { |
| 296 |
label = "ubifs"; |
| 297 |
/* ~ 84 MiB */ |
| 298 |
reg = <0x820000 0x54e0000>; |
| 299 |
}; |
| 300 |
|
| 301 |
/* Hardcoded into stock bootloader */ |
| 302 |
partition@5d00000 { |
| 303 |
label = "failsafe-uImage"; |
| 304 |
/* 5 MiB */ |
| 305 |
reg = <0x5d00000 0x500000>; |
| 306 |
}; |
| 307 |
|
| 308 |
partition@6200000 { |
| 309 |
label = "failsafe-fs"; |
| 310 |
/* 29 MiB */ |
| 311 |
reg = <0x6200000 0x1d00000>; |
| 312 |
}; |
| 313 |
|
| 314 |
partition@7f00000 { |
| 315 |
label = "bbt"; |
| 316 |
/* 1 MiB for BBT */ |
| 317 |
reg = <0x7f00000 0x100000>; |
| 318 |
}; |
| 319 |
}; |
| 320 |
}; |
| 321 |
}; |