| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for SolidRun Armada 38x Microsom |
| 4 |
* |
| 5 |
* Copyright (C) 2015 Russell King |
| 6 |
*/ |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
memory { |
| 12 |
device_type = "memory"; |
| 13 |
reg = <0x00000000 0x10000000>; /* 256 MB */ |
| 14 |
}; |
| 15 |
|
| 16 |
soc { |
| 17 |
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| 18 |
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 |
| 19 |
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 |
| 20 |
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 |
| 21 |
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; |
| 22 |
|
| 23 |
internal-regs { |
| 24 |
rtc@a3800 { |
| 25 |
/* |
| 26 |
* If the rtc doesn't work, run "date reset" |
| 27 |
* twice in u-boot. |
| 28 |
*/ |
| 29 |
status = "okay"; |
| 30 |
}; |
| 31 |
}; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
&bm { |
| 36 |
status = "okay"; |
| 37 |
}; |
| 38 |
|
| 39 |
&bm_bppi { |
| 40 |
status = "okay"; |
| 41 |
}; |
| 42 |
|
| 43 |
ð0 { |
| 44 |
/* ethernet@70000 */ |
| 45 |
pinctrl-0 = <&ge0_rgmii_pins>; |
| 46 |
pinctrl-names = "default"; |
| 47 |
phy = <&phy_dedicated>; |
| 48 |
phy-mode = "rgmii-id"; |
| 49 |
buffer-manager = <&bm>; |
| 50 |
bm,pool-long = <0>; |
| 51 |
bm,pool-short = <1>; |
| 52 |
status = "okay"; |
| 53 |
}; |
| 54 |
|
| 55 |
&mdio { |
| 56 |
/* |
| 57 |
* Add the phy clock here, so the phy can be accessed to read its |
| 58 |
* IDs prior to binding with the driver. |
| 59 |
*/ |
| 60 |
pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; |
| 61 |
pinctrl-names = "default"; |
| 62 |
|
| 63 |
phy_dedicated: ethernet-phy@0 { |
| 64 |
/* |
| 65 |
* Annoyingly, the marvell phy driver configures the LED |
| 66 |
* register, rather than preserving reset-loaded setting. |
| 67 |
* We undo that rubbish here. |
| 68 |
*/ |
| 69 |
marvell,reg-init = <3 16 0 0x101e>; |
| 70 |
reg = <0>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
&i2c0 { |
| 75 |
clock-frequency = <400000>; |
| 76 |
pinctrl-0 = <&i2c0_pins>; |
| 77 |
pinctrl-names = "default"; |
| 78 |
status = "okay"; |
| 79 |
|
| 80 |
eeprom@53 { |
| 81 |
compatible = "atmel,24c02"; |
| 82 |
reg = <0x53>; |
| 83 |
pagesize = <16>; |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
&pinctrl { |
| 88 |
microsom_phy_clk_pins: microsom-phy-clk-pins { |
| 89 |
marvell,pins = "mpp45"; |
| 90 |
marvell,function = "ref"; |
| 91 |
}; |
| 92 |
/* Optional eMMC */ |
| 93 |
microsom_sdhci_pins: microsom-sdhci-pins { |
| 94 |
marvell,pins = "mpp21", "mpp28", "mpp37", |
| 95 |
"mpp38", "mpp39", "mpp40"; |
| 96 |
marvell,function = "sd0"; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
&spi1 { |
| 101 |
/* The microsom has an optional W25Q32 on board, connected to CS0 */ |
| 102 |
pinctrl-0 = <&spi1_pins>; |
| 103 |
|
| 104 |
w25q32: flash@0 { |
| 105 |
#address-cells = <1>; |
| 106 |
#size-cells = <1>; |
| 107 |
compatible = "w25q32", "jedec,spi-nor"; |
| 108 |
reg = <0>; /* Chip select 0 */ |
| 109 |
spi-max-frequency = <3000000>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
&uart0 { |
| 114 |
pinctrl-0 = <&uart0_pins>; |
| 115 |
pinctrl-names = "default"; |
| 116 |
status = "okay"; |
| 117 |
}; |