Debian Codegraph @

arch/arm/boot/dts/microchip/usb_a9260_common.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * usb_a926x.dts - Device Tree file for Calao USB A926x board
4 *
5 * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
6 */
7
8 / {
9 chosen {
10 bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
11 stdout-path = "serial0:115200n8";
12 };
13
14 clocks {
15 slow_xtal {
16 clock-frequency = <32768>;
17 };
18
19 main_xtal {
20 clock-frequency = <12000000>;
21 };
22 };
23
24 memory@20000000 {
25 reg = <0x20000000 0x4000000>;
26 };
27
28 ahb {
29 apb {
30 dbgu: serial@fffff200 {
31 status = "okay";
32 };
33
34 tcb0: timer@fffa0000 {
35 timer@0 {
36 compatible = "atmel,tcb-timer";
37 reg = <0>, <1>;
38 };
39
40 timer@2 {
41 compatible = "atmel,tcb-timer";
42 reg = <2>;
43 };
44 };
45
46 macb0: ethernet@fffc4000 {
47 phy-mode = "rmii";
48 status = "okay";
49 };
50
51 usb1: gadget@fffa4000 {
52 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
53 status = "okay";
54 };
55 };
56
57 ebi: ebi@10000000 {
58 status = "okay";
59
60 nand_controller: nand-controller {
61 status = "okay";
62 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
63 pinctrl-names = "default";
64
65 nand@3 {
66 reg = <0x3 0x0 0x800000>;
67 rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
68 cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
69 nand-bus-width = <8>;
70 nand-ecc-mode = "soft";
71 nand-on-flash-bbt;
72 label = "atmel_nand";
73
74 partitions {
75 compatible = "fixed-partitions";
76 #address-cells = <1>;
77 #size-cells = <1>;
78
79 at91bootstrap@0 {
80 label = "at91bootstrap";
81 reg = <0x0 0x20000>;
82 };
83
84 barebox@20000 {
85 label = "barebox";
86 reg = <0x20000 0x40000>;
87 };
88
89 bareboxenv@60000 {
90 label = "bareboxenv";
91 reg = <0x60000 0x20000>;
92 };
93
94 bareboxenv2@80000 {
95 label = "bareboxenv2";
96 reg = <0x80000 0x20000>;
97 };
98
99 oftree@80000 {
100 label = "oftree";
101 reg = <0xa0000 0x20000>;
102 };
103
104 kernel@a0000 {
105 label = "kernel";
106 reg = <0xc0000 0x400000>;
107 };
108
109 rootfs@4a0000 {
110 label = "rootfs";
111 reg = <0x4c0000 0x7800000>;
112 };
113
114 data@7ca0000 {
115 label = "data";
116 reg = <0x7cc0000 0x8340000>;
117 };
118 };
119 };
120 };
121 };
122
123 usb0: usb@500000 {
124 num-ports = <2>;
125 status = "okay";
126 };
127 };
128
129 leds {
130 compatible = "gpio-leds";
131
132 user_led {
133 label = "user_led";
134 gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
135 };
136 };
137
138 gpio_keys {
139 compatible = "gpio-keys";
140
141 button-user-pb {
142 label = "user_pb";
143 gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
144 linux,code = <28>;
145 wakeup-source;
146 };
147 };
148
149 i2c-gpio-0 {
150 status = "okay";
151 };
152 };