| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries |
| 6 |
* |
| 7 |
* Author: Ryan Wanner <[email protected]> |
| 8 |
* |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <dt-bindings/clock/at91.h> |
| 12 |
#include <dt-bindings/dma/at91.h> |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 15 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 16 |
#include <dt-bindings/mfd/at91-usart.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Microchip SAMA7D65 family SoC"; |
| 20 |
compatible = "microchip,sama7d65"; |
| 21 |
#address-cells = <1>; |
| 22 |
#size-cells = <1>; |
| 23 |
interrupt-parent = <&gic>; |
| 24 |
|
| 25 |
cpus { |
| 26 |
#address-cells = <1>; |
| 27 |
#size-cells = <0>; |
| 28 |
|
| 29 |
cpu0: cpu@0 { |
| 30 |
compatible = "arm,cortex-a7"; |
| 31 |
reg = <0x0>; |
| 32 |
device_type = "cpu"; |
| 33 |
clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>; |
| 34 |
clock-names = "cpu"; |
| 35 |
d-cache-size = <0x8000>; // L1, 32 KB |
| 36 |
i-cache-size = <0x8000>; // L1, 32 KB |
| 37 |
next-level-cache = <&L2>; |
| 38 |
|
| 39 |
L2: l2-cache { |
| 40 |
compatible = "cache"; |
| 41 |
cache-level = <2>; |
| 42 |
cache-size = <0x40000>; // L2, 256 KB |
| 43 |
cache-unified; |
| 44 |
}; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
clocks { |
| 49 |
main_xtal: clock-mainxtal { |
| 50 |
compatible = "fixed-clock"; |
| 51 |
clock-output-names = "main_xtal"; |
| 52 |
#clock-cells = <0>; |
| 53 |
}; |
| 54 |
|
| 55 |
slow_xtal: clock-slowxtal { |
| 56 |
compatible = "fixed-clock"; |
| 57 |
clock-output-names = "slow_xtal"; |
| 58 |
#clock-cells = <0>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
ns_sram: sram@100000 { |
| 63 |
compatible = "mmio-sram"; |
| 64 |
reg = <0x100000 0x20000>; |
| 65 |
ranges; |
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <1>; |
| 68 |
}; |
| 69 |
|
| 70 |
soc { |
| 71 |
compatible = "simple-bus"; |
| 72 |
ranges; |
| 73 |
#address-cells = <1>; |
| 74 |
#size-cells = <1>; |
| 75 |
|
| 76 |
securam: sram@e0000800 { |
| 77 |
compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram"; |
| 78 |
reg = <0xe0000800 0x4000>; |
| 79 |
ranges = <0 0xe0000800 0x4000>; |
| 80 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; |
| 81 |
#address-cells = <1>; |
| 82 |
#size-cells = <1>; |
| 83 |
no-memory-wc; |
| 84 |
}; |
| 85 |
|
| 86 |
secumod: security-module@e0004000 { |
| 87 |
compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon"; |
| 88 |
reg = <0xe0004000 0x4000>; |
| 89 |
gpio-controller; |
| 90 |
#gpio-cells = <2>; |
| 91 |
}; |
| 92 |
|
| 93 |
sfrbu: sfr@e0008000 { |
| 94 |
compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; |
| 95 |
reg = <0xe0008000 0x20>; |
| 96 |
}; |
| 97 |
|
| 98 |
pioa: pinctrl@e0014000 { |
| 99 |
compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl"; |
| 100 |
reg = <0xe0014000 0x800>; |
| 101 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| 102 |
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| 103 |
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| 104 |
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| 105 |
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 106 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; |
| 107 |
interrupt-controller; |
| 108 |
#interrupt-cells = <2>; |
| 109 |
gpio-controller; |
| 110 |
#gpio-cells = <2>; |
| 111 |
}; |
| 112 |
|
| 113 |
pmc: clock-controller@e0018000 { |
| 114 |
compatible = "microchip,sama7d65-pmc", "syscon"; |
| 115 |
reg = <0xe0018000 0x200>; |
| 116 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 117 |
#clock-cells = <2>; |
| 118 |
clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; |
| 119 |
clock-names = "td_slck", "md_slck", "main_xtal"; |
| 120 |
}; |
| 121 |
|
| 122 |
ps_wdt: watchdog@e001d000 { |
| 123 |
compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt"; |
| 124 |
reg = <0xe001d000 0x30>; |
| 125 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 126 |
clocks = <&clk32k 0>; |
| 127 |
}; |
| 128 |
|
| 129 |
reset_controller: reset-controller@e001d100 { |
| 130 |
compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc"; |
| 131 |
reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>; |
| 132 |
#reset-cells = <1>; |
| 133 |
clocks = <&clk32k 0>; |
| 134 |
}; |
| 135 |
|
| 136 |
shdwc: poweroff@e001d200 { |
| 137 |
compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon"; |
| 138 |
reg = <0xe001d200 0x20>; |
| 139 |
clocks = <&clk32k 0>; |
| 140 |
#address-cells = <1>; |
| 141 |
#size-cells = <0>; |
| 142 |
atmel,wakeup-rtc-timer; |
| 143 |
atmel,wakeup-rtt-timer; |
| 144 |
status = "disabled"; |
| 145 |
}; |
| 146 |
|
| 147 |
rtt: rtc@e001d300 { |
| 148 |
compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt"; |
| 149 |
reg = <0xe001d300 0x30>; |
| 150 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 151 |
clocks = <&clk32k 0>; |
| 152 |
}; |
| 153 |
|
| 154 |
clk32k: clock-controller@e001d500 { |
| 155 |
compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc"; |
| 156 |
reg = <0xe001d500 0x4>; |
| 157 |
clocks = <&slow_xtal>; |
| 158 |
#clock-cells = <1>; |
| 159 |
}; |
| 160 |
|
| 161 |
gpbr: syscon@e001d700 { |
| 162 |
compatible = "microchip,sama7d65-gpbr", "syscon"; |
| 163 |
reg = <0xe001d700 0x48>; |
| 164 |
}; |
| 165 |
|
| 166 |
rtc: rtc@e001d800 { |
| 167 |
compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc"; |
| 168 |
reg = <0xe001d800 0x30>; |
| 169 |
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 170 |
clocks = <&clk32k 1>; |
| 171 |
}; |
| 172 |
|
| 173 |
chipid@e0020000 { |
| 174 |
compatible = "microchip,sama7d65-chipid"; |
| 175 |
reg = <0xe0020000 0x8>; |
| 176 |
}; |
| 177 |
|
| 178 |
can0: can@e0828000 { |
| 179 |
compatible = "bosch,m_can"; |
| 180 |
reg = <0xe0828000 0x200>, <0x100000 0x7800>; |
| 181 |
reg-names = "m_can", "message_ram"; |
| 182 |
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 183 |
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| 184 |
interrupt-names = "int0", "int1"; |
| 185 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; |
| 186 |
clock-names = "hclk", "cclk"; |
| 187 |
assigned-clocks = <&pmc PMC_TYPE_GCK 58>; |
| 188 |
assigned-clock-rates = <40000000>; |
| 189 |
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 190 |
bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; |
| 191 |
status = "disabled"; |
| 192 |
}; |
| 193 |
|
| 194 |
can1: can@e082c000 { |
| 195 |
compatible = "bosch,m_can"; |
| 196 |
reg = <0xe082c000 0x200>, <0x100000 0xbc00>; |
| 197 |
reg-names = "m_can", "message_ram"; |
| 198 |
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 199 |
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| 200 |
interrupt-names = "int0", "int1"; |
| 201 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>; |
| 202 |
clock-names = "hclk", "cclk"; |
| 203 |
assigned-clocks = <&pmc PMC_TYPE_GCK 59>; |
| 204 |
assigned-clock-rates = <40000000>; |
| 205 |
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 206 |
bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; |
| 207 |
status = "disabled"; |
| 208 |
}; |
| 209 |
|
| 210 |
can2: can@e0830000 { |
| 211 |
compatible = "bosch,m_can"; |
| 212 |
reg = <0xe0830000 0x200>, <0x100000 0x10000>; |
| 213 |
reg-names = "m_can", "message_ram"; |
| 214 |
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| 215 |
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| 216 |
interrupt-names = "int0", "int1"; |
| 217 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>; |
| 218 |
clock-names = "hclk", "cclk"; |
| 219 |
assigned-clocks = <&pmc PMC_TYPE_GCK 60>; |
| 220 |
assigned-clock-rates = <40000000>; |
| 221 |
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 222 |
bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>; |
| 223 |
status = "disabled"; |
| 224 |
}; |
| 225 |
|
| 226 |
can3: can@e0834000 { |
| 227 |
compatible = "bosch,m_can"; |
| 228 |
reg = <0xe0834000 0x200>, <0x110000 0x4400>; |
| 229 |
reg-names = "m_can", "message_ram"; |
| 230 |
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, |
| 231 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 232 |
interrupt-names = "int0", "int1"; |
| 233 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>; |
| 234 |
clock-names = "hclk", "cclk"; |
| 235 |
assigned-clocks = <&pmc PMC_TYPE_GCK 61>; |
| 236 |
assigned-clock-rates = <40000000>; |
| 237 |
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 238 |
bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; |
| 239 |
status = "disabled"; |
| 240 |
}; |
| 241 |
|
| 242 |
can4: can@e0838000 { |
| 243 |
compatible = "bosch,m_can"; |
| 244 |
reg = <0xe0838000 0x200>, <0x110000 0x8800>; |
| 245 |
reg-names = "m_can", "message_ram"; |
| 246 |
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, |
| 247 |
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| 248 |
interrupt-names = "int0", "int1"; |
| 249 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>; |
| 250 |
clock-names = "hclk", "cclk"; |
| 251 |
assigned-clocks = <&pmc PMC_TYPE_GCK 62>; |
| 252 |
assigned-clock-rates = <40000000>; |
| 253 |
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 254 |
bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>; |
| 255 |
status = "disabled"; |
| 256 |
}; |
| 257 |
|
| 258 |
dma2: dma-controller@e1200000 { |
| 259 |
compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; |
| 260 |
reg = <0xe1200000 0x1000>; |
| 261 |
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| 262 |
#dma-cells = <1>; |
| 263 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; |
| 264 |
clock-names = "dma_clk"; |
| 265 |
dma-requests = <0>; |
| 266 |
status = "disabled"; |
| 267 |
}; |
| 268 |
|
| 269 |
sdmmc1: mmc@e1208000 { |
| 270 |
compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci"; |
| 271 |
reg = <0xe1208000 0x400>; |
| 272 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 273 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>; |
| 274 |
clock-names = "hclock", "multclk"; |
| 275 |
assigned-clocks = <&pmc PMC_TYPE_GCK 76>; |
| 276 |
assigned-clock-rates = <200000000>; |
| 277 |
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>; |
| 278 |
status = "disabled"; |
| 279 |
}; |
| 280 |
|
| 281 |
aes: crypto@e1600000 { |
| 282 |
compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes"; |
| 283 |
reg = <0xe1600000 0x100>; |
| 284 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 285 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; |
| 286 |
clock-names = "aes_clk"; |
| 287 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, |
| 288 |
<&dma0 AT91_XDMAC_DT_PERID(2)>; |
| 289 |
dma-names = "tx", "rx"; |
| 290 |
}; |
| 291 |
|
| 292 |
sha: crypto@e1604000 { |
| 293 |
compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha"; |
| 294 |
reg = <0xe1604000 0x100>; |
| 295 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 296 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 78>; |
| 297 |
clock-names = "sha_clk"; |
| 298 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; |
| 299 |
dma-names = "tx"; |
| 300 |
}; |
| 301 |
|
| 302 |
tdes: crypto@e1608000 { |
| 303 |
compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes"; |
| 304 |
reg = <0xe1608000 0x100>; |
| 305 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 306 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 91>; |
| 307 |
clock-names = "tdes_clk"; |
| 308 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, |
| 309 |
<&dma0 AT91_XDMAC_DT_PERID(53)>; |
| 310 |
dma-names = "tx", "rx"; |
| 311 |
}; |
| 312 |
|
| 313 |
trng: rng@e160c000 { |
| 314 |
compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng"; |
| 315 |
reg = <0xe160c000 0x100>; |
| 316 |
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| 317 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 92>; |
| 318 |
}; |
| 319 |
|
| 320 |
dma0: dma-controller@e1610000 { |
| 321 |
compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; |
| 322 |
reg = <0xe1610000 0x1000>; |
| 323 |
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| 324 |
#dma-cells = <1>; |
| 325 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; |
| 326 |
clock-names = "dma_clk"; |
| 327 |
status = "disabled"; |
| 328 |
}; |
| 329 |
|
| 330 |
dma1: dma-controller@e1614000 { |
| 331 |
compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; |
| 332 |
reg = <0xe1614000 0x1000>; |
| 333 |
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| 334 |
#dma-cells = <1>; |
| 335 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| 336 |
clock-names = "dma_clk"; |
| 337 |
status = "disabled"; |
| 338 |
}; |
| 339 |
|
| 340 |
gmac0: ethernet@e1618000 { |
| 341 |
compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem"; |
| 342 |
reg = <0xe1618000 0x2000>; |
| 343 |
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, |
| 344 |
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| 345 |
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 346 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| 347 |
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| 348 |
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| 349 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>; |
| 350 |
clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; |
| 351 |
assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>; |
| 352 |
assigned-clock-rates = <125000000>, <200000000>; |
| 353 |
status = "disabled"; |
| 354 |
}; |
| 355 |
|
| 356 |
gmac1: ethernet@e161c000 { |
| 357 |
compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem"; |
| 358 |
reg = <0xe161c000 0x2000>; |
| 359 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| 360 |
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| 361 |
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| 362 |
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| 363 |
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, |
| 364 |
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| 365 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>; |
| 366 |
clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; |
| 367 |
assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>; |
| 368 |
assigned-clock-rates = <125000000>, <200000000>; |
| 369 |
status = "disabled"; |
| 370 |
}; |
| 371 |
|
| 372 |
pit64b0: timer@e1800000 { |
| 373 |
compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; |
| 374 |
reg = <0xe1800000 0x100>; |
| 375 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 376 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>; |
| 377 |
clock-names = "pclk", "gclk"; |
| 378 |
}; |
| 379 |
|
| 380 |
pit64b1: timer@e1804000 { |
| 381 |
compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; |
| 382 |
reg = <0xe1804000 0x100>; |
| 383 |
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 384 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>; |
| 385 |
clock-names = "pclk", "gclk"; |
| 386 |
}; |
| 387 |
|
| 388 |
pwm: pwm@e1818000 { |
| 389 |
compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm"; |
| 390 |
reg = <0xe1818000 0x500>; |
| 391 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 392 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 72>; |
| 393 |
#pwm-cells = <3>; |
| 394 |
status = "disabled"; |
| 395 |
}; |
| 396 |
|
| 397 |
flx0: flexcom@e1820000 { |
| 398 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 399 |
reg = <0xe1820000 0x200>; |
| 400 |
ranges = <0x0 0xe1820000 0x800>; |
| 401 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; |
| 402 |
#address-cells = <1>; |
| 403 |
#size-cells = <1>; |
| 404 |
status = "disabled"; |
| 405 |
|
| 406 |
uart0: serial@200 { |
| 407 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 408 |
reg = <0x200 0x200>; |
| 409 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 410 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; |
| 411 |
clock-names = "usart"; |
| 412 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, |
| 413 |
<&dma1 AT91_XDMAC_DT_PERID(5)>; |
| 414 |
dma-names = "tx", "rx"; |
| 415 |
atmel,use-dma-rx; |
| 416 |
atmel,use-dma-tx; |
| 417 |
atmel,fifo-size = <32>; |
| 418 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 419 |
status = "disabled"; |
| 420 |
}; |
| 421 |
|
| 422 |
spi0: spi@400 { |
| 423 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 424 |
reg = <0x400 0x200>; |
| 425 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 426 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; |
| 427 |
clock-names = "spi_clk"; |
| 428 |
#address-cells = <1>; |
| 429 |
#size-cells = <0>; |
| 430 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, |
| 431 |
<&dma1 AT91_XDMAC_DT_PERID(5)>; |
| 432 |
dma-names = "tx", "rx"; |
| 433 |
atmel,fifo-size = <32>; |
| 434 |
status = "disabled"; |
| 435 |
}; |
| 436 |
|
| 437 |
i2c0: i2c@600 { |
| 438 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 439 |
reg = <0x600 0x200>; |
| 440 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 441 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; |
| 442 |
#address-cells = <1>; |
| 443 |
#size-cells = <0>; |
| 444 |
atmel,fifo-size = <32>; |
| 445 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>, |
| 446 |
<&dma0 AT91_XDMAC_DT_PERID(5)>; |
| 447 |
dma-names = "tx", "rx"; |
| 448 |
status = "disabled"; |
| 449 |
}; |
| 450 |
}; |
| 451 |
|
| 452 |
flx1: flexcom@e1824000 { |
| 453 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 454 |
reg = <0xe1824000 0x200>; |
| 455 |
ranges = <0x0 0xe1824000 0x800>; |
| 456 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; |
| 457 |
#address-cells = <1>; |
| 458 |
#size-cells = <1>; |
| 459 |
status = "disabled"; |
| 460 |
|
| 461 |
uart1: serial@200 { |
| 462 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 463 |
reg = <0x200 0x200>; |
| 464 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 465 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; |
| 466 |
clock-names = "usart"; |
| 467 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, |
| 468 |
<&dma0 AT91_XDMAC_DT_PERID(7)>; |
| 469 |
dma-names = "tx", "rx"; |
| 470 |
atmel,use-dma-rx; |
| 471 |
atmel,use-dma-tx; |
| 472 |
atmel,fifo-size = <32>; |
| 473 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 474 |
status = "disabled"; |
| 475 |
}; |
| 476 |
|
| 477 |
spi1: spi@400 { |
| 478 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 479 |
reg = <0x400 0x200>; |
| 480 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 481 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; |
| 482 |
clock-names = "spi_clk"; |
| 483 |
#address-cells = <1>; |
| 484 |
#size-cells = <0>; |
| 485 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, |
| 486 |
<&dma0 AT91_XDMAC_DT_PERID(7)>; |
| 487 |
dma-names = "tx", "rx"; |
| 488 |
atmel,fifo-size = <32>; |
| 489 |
status = "disabled"; |
| 490 |
}; |
| 491 |
|
| 492 |
i2c1: i2c@600 { |
| 493 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 494 |
reg = <0x600 0x200>; |
| 495 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 496 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; |
| 497 |
#address-cells = <1>; |
| 498 |
#size-cells = <0>; |
| 499 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, |
| 500 |
<&dma0 AT91_XDMAC_DT_PERID(7)>; |
| 501 |
dma-names = "tx", "rx"; |
| 502 |
atmel,fifo-size = <32>; |
| 503 |
status = "disabled"; |
| 504 |
}; |
| 505 |
}; |
| 506 |
|
| 507 |
flx2: flexcom@e1828000 { |
| 508 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 509 |
reg = <0xe1828000 0x200>; |
| 510 |
ranges = <0x0 0xe1828000 0x800>; |
| 511 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; |
| 512 |
#address-cells = <1>; |
| 513 |
#size-cells = <1>; |
| 514 |
status = "disabled"; |
| 515 |
|
| 516 |
uart2: serial@200 { |
| 517 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 518 |
reg = <0x200 0x200>; |
| 519 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 520 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; |
| 521 |
clock-names = "usart"; |
| 522 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, |
| 523 |
<&dma1 AT91_XDMAC_DT_PERID(9)>; |
| 524 |
dma-names = "tx", "rx"; |
| 525 |
atmel,use-dma-rx; |
| 526 |
atmel,use-dma-tx; |
| 527 |
atmel,fifo-size = <32>; |
| 528 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 529 |
status = "disabled"; |
| 530 |
}; |
| 531 |
|
| 532 |
spi2: spi@400 { |
| 533 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 534 |
reg = <0x400 0x200>; |
| 535 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 536 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; |
| 537 |
clock-names = "spi_clk"; |
| 538 |
#address-cells = <1>; |
| 539 |
#size-cells = <0>; |
| 540 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, |
| 541 |
<&dma1 AT91_XDMAC_DT_PERID(9)>; |
| 542 |
dma-names = "tx", "rx"; |
| 543 |
atmel,fifo-size = <32>; |
| 544 |
status = "disabled"; |
| 545 |
}; |
| 546 |
|
| 547 |
i2c2: i2c@600 { |
| 548 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 549 |
reg = <0x600 0x200>; |
| 550 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 551 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; |
| 552 |
#address-cells = <1>; |
| 553 |
#size-cells = <0>; |
| 554 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, |
| 555 |
<&dma1 AT91_XDMAC_DT_PERID(9)>; |
| 556 |
dma-names = "tx", "rx"; |
| 557 |
atmel,fifo-size = <32>; |
| 558 |
status = "disabled"; |
| 559 |
}; |
| 560 |
}; |
| 561 |
|
| 562 |
flx3: flexcom@e182c000 { |
| 563 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 564 |
reg = <0xe182c000 0x200>; |
| 565 |
ranges = <0x0 0xe182c000 0x800>; |
| 566 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; |
| 567 |
#address-cells = <1>; |
| 568 |
#size-cells = <1>; |
| 569 |
status = "disabled"; |
| 570 |
|
| 571 |
uart3: serial@200 { |
| 572 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 573 |
reg = <0x200 0x200>; |
| 574 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 575 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; |
| 576 |
clock-names = "usart"; |
| 577 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, |
| 578 |
<&dma0 AT91_XDMAC_DT_PERID(11)>; |
| 579 |
dma-names = "tx", "rx"; |
| 580 |
atmel,use-dma-rx; |
| 581 |
atmel,use-dma-tx; |
| 582 |
atmel,fifo-size = <32>; |
| 583 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 584 |
status = "disabled"; |
| 585 |
}; |
| 586 |
|
| 587 |
spi3: spi@400 { |
| 588 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 589 |
reg = <0x400 0x200>; |
| 590 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 591 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; |
| 592 |
clock-names = "spi_clk"; |
| 593 |
#address-cells = <1>; |
| 594 |
#size-cells = <0>; |
| 595 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, |
| 596 |
<&dma0 AT91_XDMAC_DT_PERID(11)>; |
| 597 |
dma-names = "tx", "rx"; |
| 598 |
atmel,fifo-size = <32>; |
| 599 |
status = "disabled"; |
| 600 |
}; |
| 601 |
|
| 602 |
i2c3: i2c@600 { |
| 603 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 604 |
reg = <0x600 0x200>; |
| 605 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 606 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; |
| 607 |
#address-cells = <1>; |
| 608 |
#size-cells = <0>; |
| 609 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, |
| 610 |
<&dma0 AT91_XDMAC_DT_PERID(11)>; |
| 611 |
dma-names = "tx", "rx"; |
| 612 |
atmel,fifo-size = <32>; |
| 613 |
status = "disabled"; |
| 614 |
}; |
| 615 |
|
| 616 |
}; |
| 617 |
|
| 618 |
flx4: flexcom@e2018000 { |
| 619 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 620 |
reg = <0xe2018000 0x200>; |
| 621 |
ranges = <0x0 0xe2018000 0x800>; |
| 622 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| 623 |
#address-cells = <1>; |
| 624 |
#size-cells = <1>; |
| 625 |
status = "disabled"; |
| 626 |
|
| 627 |
uart4: serial@200 { |
| 628 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 629 |
reg = <0x200 0x200>; |
| 630 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 631 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| 632 |
clock-names = "usart"; |
| 633 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, |
| 634 |
<&dma1 AT91_XDMAC_DT_PERID(13)>; |
| 635 |
dma-names = "tx", "rx"; |
| 636 |
atmel,use-dma-rx; |
| 637 |
atmel,use-dma-tx; |
| 638 |
atmel,fifo-size = <32>; |
| 639 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 640 |
status = "disabled"; |
| 641 |
}; |
| 642 |
|
| 643 |
spi4: spi@400 { |
| 644 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 645 |
reg = <0x400 0x200>; |
| 646 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 647 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| 648 |
clock-names = "spi_clk"; |
| 649 |
#address-cells = <1>; |
| 650 |
#size-cells = <0>; |
| 651 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>, |
| 652 |
<&dma0 AT91_XDMAC_DT_PERID(13)>; |
| 653 |
dma-names = "tx", "rx"; |
| 654 |
atmel,fifo-size = <32>; |
| 655 |
status = "disabled"; |
| 656 |
}; |
| 657 |
|
| 658 |
i2c4: i2c@600 { |
| 659 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 660 |
reg = <0x600 0x200>; |
| 661 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 662 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| 663 |
#address-cells = <1>; |
| 664 |
#size-cells = <0>; |
| 665 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, |
| 666 |
<&dma1 AT91_XDMAC_DT_PERID(13)>; |
| 667 |
dma-names = "tx", "rx"; |
| 668 |
atmel,fifo-size = <32>; |
| 669 |
status = "disabled"; |
| 670 |
}; |
| 671 |
}; |
| 672 |
|
| 673 |
flx5: flexcom@e201c000 { |
| 674 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 675 |
reg = <0xe201c000 0x200>; |
| 676 |
ranges = <0x0 0xe201c000 0x800>; |
| 677 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| 678 |
#address-cells = <1>; |
| 679 |
#size-cells = <1>; |
| 680 |
status = "disabled"; |
| 681 |
|
| 682 |
uart5: serial@200 { |
| 683 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 684 |
reg = <0x200 0x200>; |
| 685 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 686 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| 687 |
clock-names = "usart"; |
| 688 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, |
| 689 |
<&dma0 AT91_XDMAC_DT_PERID(15)>; |
| 690 |
dma-names = "tx", "rx"; |
| 691 |
atmel,use-dma-rx; |
| 692 |
atmel,use-dma-tx; |
| 693 |
atmel,fifo-size = <32>; |
| 694 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 695 |
status = "disabled"; |
| 696 |
}; |
| 697 |
|
| 698 |
spi5: spi@400 { |
| 699 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 700 |
reg = <0x400 0x200>; |
| 701 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 702 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| 703 |
clock-names = "spi_clk"; |
| 704 |
#address-cells = <1>; |
| 705 |
#size-cells = <0>; |
| 706 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, |
| 707 |
<&dma0 AT91_XDMAC_DT_PERID(15)>; |
| 708 |
dma-names = "tx", "rx"; |
| 709 |
atmel,fifo-size = <32>; |
| 710 |
status = "disabled"; |
| 711 |
}; |
| 712 |
|
| 713 |
i2c5: i2c@600 { |
| 714 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 715 |
reg = <0x600 0x200>; |
| 716 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 717 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| 718 |
#address-cells = <1>; |
| 719 |
#size-cells = <0>; |
| 720 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, |
| 721 |
<&dma0 AT91_XDMAC_DT_PERID(15)>; |
| 722 |
dma-names = "tx", "rx"; |
| 723 |
atmel,fifo-size = <32>; |
| 724 |
status = "disabled"; |
| 725 |
}; |
| 726 |
}; |
| 727 |
|
| 728 |
flx6: flexcom@e2020000 { |
| 729 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 730 |
reg = <0xe2020000 0x200>; |
| 731 |
ranges = <0x0 0xe2020000 0x800>; |
| 732 |
#address-cells = <1>; |
| 733 |
#size-cells = <1>; |
| 734 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; |
| 735 |
status = "disabled"; |
| 736 |
|
| 737 |
uart6: serial@200 { |
| 738 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 739 |
reg = <0x200 0x200>; |
| 740 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 741 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; |
| 742 |
clock-names = "usart"; |
| 743 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>, |
| 744 |
<&dma1 AT91_XDMAC_DT_PERID(17)>; |
| 745 |
dma-names = "tx", "rx"; |
| 746 |
atmel,use-dma-rx; |
| 747 |
atmel,use-dma-tx; |
| 748 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 749 |
atmel,fifo-size = <32>; |
| 750 |
status = "disabled"; |
| 751 |
}; |
| 752 |
|
| 753 |
spi6: spi@400 { |
| 754 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 755 |
reg = <0x400 0x200>; |
| 756 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 757 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; |
| 758 |
clock-names = "spi_clk"; |
| 759 |
#address-cells = <1>; |
| 760 |
#size-cells = <0>; |
| 761 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>, |
| 762 |
<&dma1 AT91_XDMAC_DT_PERID(17)>; |
| 763 |
dma-names = "tx", "rx"; |
| 764 |
atmel,fifo-size = <32>; |
| 765 |
status = "disabled"; |
| 766 |
}; |
| 767 |
|
| 768 |
i2c6: i2c@600 { |
| 769 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 770 |
reg = <0x600 0x200>; |
| 771 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 772 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; |
| 773 |
#address-cells = <1>; |
| 774 |
#size-cells = <0>; |
| 775 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>, |
| 776 |
<&dma1 AT91_XDMAC_DT_PERID(17)>; |
| 777 |
dma-names = "tx", "rx"; |
| 778 |
atmel,fifo-size = <32>; |
| 779 |
status = "disabled"; |
| 780 |
}; |
| 781 |
}; |
| 782 |
|
| 783 |
flx7: flexcom@e2024000 { |
| 784 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 785 |
reg = <0xe2024000 0x200>; |
| 786 |
ranges = <0x0 0xe2024000 0x800>; |
| 787 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| 788 |
#address-cells = <1>; |
| 789 |
#size-cells = <1>; |
| 790 |
status = "disabled"; |
| 791 |
|
| 792 |
uart7: serial@200 { |
| 793 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 794 |
reg = <0x200 0x200>; |
| 795 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 796 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| 797 |
clock-names = "usart"; |
| 798 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, |
| 799 |
<&dma1 AT91_XDMAC_DT_PERID(19)>; |
| 800 |
dma-names = "tx", "rx"; |
| 801 |
atmel,use-dma-rx; |
| 802 |
atmel,use-dma-tx; |
| 803 |
atmel,fifo-size = <32>; |
| 804 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 805 |
status = "disabled"; |
| 806 |
}; |
| 807 |
|
| 808 |
spi7: spi@400 { |
| 809 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 810 |
reg = <0x400 0x200>; |
| 811 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 812 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| 813 |
clock-names = "spi_clk"; |
| 814 |
#address-cells = <1>; |
| 815 |
#size-cells = <0>; |
| 816 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, |
| 817 |
<&dma1 AT91_XDMAC_DT_PERID(19)>; |
| 818 |
dma-names = "tx", "rx"; |
| 819 |
atmel,fifo-size = <32>; |
| 820 |
status = "disabled"; |
| 821 |
}; |
| 822 |
|
| 823 |
i2c7: i2c@600 { |
| 824 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 825 |
reg = <0x600 0x200>; |
| 826 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 827 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| 828 |
#address-cells = <1>; |
| 829 |
#size-cells = <0>; |
| 830 |
dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, |
| 831 |
<&dma1 AT91_XDMAC_DT_PERID(19)>; |
| 832 |
dma-names = "tx", "rx"; |
| 833 |
atmel,fifo-size = <32>; |
| 834 |
status = "disabled"; |
| 835 |
}; |
| 836 |
}; |
| 837 |
|
| 838 |
flx8: flexcom@e281c000 { |
| 839 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 840 |
reg = <0xe281c000 0x200>; |
| 841 |
ranges = <0x0 0xe281c000 0x800>; |
| 842 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| 843 |
#address-cells = <1>; |
| 844 |
#size-cells = <1>; |
| 845 |
status = "disabled"; |
| 846 |
|
| 847 |
uart8: serial@200 { |
| 848 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 849 |
reg = <0x200 0x200>; |
| 850 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 851 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| 852 |
clock-names = "usart"; |
| 853 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, |
| 854 |
<&dma0 AT91_XDMAC_DT_PERID(21)>; |
| 855 |
dma-names = "tx", "rx"; |
| 856 |
atmel,use-dma-rx; |
| 857 |
atmel,use-dma-tx; |
| 858 |
atmel,fifo-size = <32>; |
| 859 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 860 |
status = "disabled"; |
| 861 |
}; |
| 862 |
|
| 863 |
spi8: spi@400 { |
| 864 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 865 |
reg = <0x400 0x200>; |
| 866 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 867 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| 868 |
clock-names = "spi_clk"; |
| 869 |
#address-cells = <1>; |
| 870 |
#size-cells = <0>; |
| 871 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, |
| 872 |
<&dma0 AT91_XDMAC_DT_PERID(21)>; |
| 873 |
dma-names = "tx", "rx"; |
| 874 |
atmel,fifo-size = <32>; |
| 875 |
status = "disabled"; |
| 876 |
}; |
| 877 |
|
| 878 |
i2c8: i2c@600 { |
| 879 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 880 |
reg = <0x600 0x200>; |
| 881 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 882 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| 883 |
#address-cells = <1>; |
| 884 |
#size-cells = <0>; |
| 885 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, |
| 886 |
<&dma0 AT91_XDMAC_DT_PERID(21)>; |
| 887 |
dma-names = "tx", "rx"; |
| 888 |
atmel,fifo-size = <32>; |
| 889 |
status = "disabled"; |
| 890 |
}; |
| 891 |
}; |
| 892 |
|
| 893 |
flx9: flexcom@e2820000 { |
| 894 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 895 |
reg = <0xe2820000 0x200>; |
| 896 |
ranges = <0x0 0xe2820000 0x800>; |
| 897 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; |
| 898 |
#address-cells = <1>; |
| 899 |
#size-cells = <1>; |
| 900 |
status = "disabled"; |
| 901 |
|
| 902 |
uart9: serial@200 { |
| 903 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 904 |
reg = <0x200 0x200>; |
| 905 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 906 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; |
| 907 |
clock-names = "usart"; |
| 908 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, |
| 909 |
<&dma0 AT91_XDMAC_DT_PERID(23)>; |
| 910 |
dma-names = "tx", "rx"; |
| 911 |
atmel,use-dma-rx; |
| 912 |
atmel,use-dma-tx; |
| 913 |
atmel,fifo-size = <32>; |
| 914 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 915 |
status = "disabled"; |
| 916 |
}; |
| 917 |
|
| 918 |
spi9: spi@400 { |
| 919 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 920 |
reg = <0x400 0x200>; |
| 921 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 922 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; |
| 923 |
clock-names = "spi_clk"; |
| 924 |
#address-cells = <1>; |
| 925 |
#size-cells = <0>; |
| 926 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, |
| 927 |
<&dma0 AT91_XDMAC_DT_PERID(23)>; |
| 928 |
dma-names = "tx", "rx"; |
| 929 |
atmel,fifo-size = <32>; |
| 930 |
status = "disabled"; |
| 931 |
}; |
| 932 |
|
| 933 |
i2c9: i2c@600 { |
| 934 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 935 |
reg = <0x600 0x200>; |
| 936 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 937 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; |
| 938 |
#address-cells = <1>; |
| 939 |
#size-cells = <0>; |
| 940 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, |
| 941 |
<&dma0 AT91_XDMAC_DT_PERID(23)>; |
| 942 |
dma-names = "tx", "rx"; |
| 943 |
atmel,fifo-size = <32>; |
| 944 |
status = "disabled"; |
| 945 |
}; |
| 946 |
}; |
| 947 |
|
| 948 |
flx10: flexcom@e2824000 { |
| 949 |
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; |
| 950 |
reg = <0xe2824000 0x200>; |
| 951 |
ranges = <0x0 0xe2824000 0x800>; |
| 952 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| 953 |
#address-cells = <1>; |
| 954 |
#size-cells = <1>; |
| 955 |
status = "disabled"; |
| 956 |
|
| 957 |
uart10: serial@200 { |
| 958 |
compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; |
| 959 |
reg = <0x200 0x200>; |
| 960 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 961 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| 962 |
clock-names = "usart"; |
| 963 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>, |
| 964 |
<&dma0 AT91_XDMAC_DT_PERID(25)>; |
| 965 |
dma-names = "tx", "rx"; |
| 966 |
atmel,use-dma-rx; |
| 967 |
atmel,use-dma-tx; |
| 968 |
atmel,fifo-size = <32>; |
| 969 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 970 |
status = "disabled"; |
| 971 |
}; |
| 972 |
|
| 973 |
spi10: spi@400 { |
| 974 |
compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; |
| 975 |
reg = <0x400 0x200>; |
| 976 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 977 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| 978 |
clock-names = "spi_clk"; |
| 979 |
#address-cells = <1>; |
| 980 |
#size-cells = <0>; |
| 981 |
dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>, |
| 982 |
<&dma0 AT91_XDMAC_DT_PERID(25)>; |
| 983 |
dma-names = "tx", "rx"; |
| 984 |
atmel,fifo-size = <32>; |
| 985 |
status = "disabled"; |
| 986 |
}; |
| 987 |
|
| 988 |
i2c10: i2c@600 { |
| 989 |
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; |
| 990 |
reg = <0x600 0x200>; |
| 991 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 992 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| 993 |
#address-cells = <1>; |
| 994 |
#size-cells = <0>; |
| 995 |
atmel,fifo-size = <32>; |
| 996 |
status = "disabled"; |
| 997 |
}; |
| 998 |
}; |
| 999 |
|
| 1000 |
uddrc: uddrc@e3800000 { |
| 1001 |
compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc"; |
| 1002 |
reg = <0xe3800000 0x4000>; |
| 1003 |
}; |
| 1004 |
|
| 1005 |
ddr3phy: ddr3phy@e3804000 { |
| 1006 |
compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy"; |
| 1007 |
reg = <0xe3804000 0x1000>; |
| 1008 |
}; |
| 1009 |
|
| 1010 |
gic: interrupt-controller@e8c11000 { |
| 1011 |
compatible = "arm,cortex-a7-gic"; |
| 1012 |
reg = <0xe8c11000 0x1000>, |
| 1013 |
<0xe8c12000 0x2000>; |
| 1014 |
#interrupt-cells = <3>; |
| 1015 |
#address-cells = <0>; |
| 1016 |
interrupt-controller; |
| 1017 |
}; |
| 1018 |
}; |
| 1019 |
}; |