| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3 |
| 4 |
* family SoC boards |
| 5 |
* |
| 6 |
* Copyright (C) 2018 Overkiz SAS |
| 7 |
* |
| 8 |
* Authors: Dorian Rocipon <[email protected]> |
| 9 |
* Kevin Carli <[email protected]> |
| 10 |
* Mickael Gardet <[email protected]> |
| 11 |
*/ |
| 12 |
/dts-v1/; |
| 13 |
#include "sama5d2.dtsi" |
| 14 |
#include "sama5d2-pinfunc.h" |
| 15 |
#include <dt-bindings/gpio/gpio.h> |
| 16 |
#include <dt-bindings/mfd/atmel-flexcom.h> |
| 17 |
#include <dt-bindings/pinctrl/at91.h> |
| 18 |
#include <dt-bindings/pwm/pwm.h> |
| 19 |
|
| 20 |
/ { |
| 21 |
model = "Overkiz Kizbox3"; |
| 22 |
compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5"; |
| 23 |
|
| 24 |
aliases { |
| 25 |
serial0 = &uart0; |
| 26 |
serial1 = &uart1; |
| 27 |
serial2 = &uart2; |
| 28 |
serial3 = &uart3; |
| 29 |
serial4 = &uart4; |
| 30 |
serial5 = &uart5; |
| 31 |
serial6 = &uart8; |
| 32 |
}; |
| 33 |
|
| 34 |
chosen { |
| 35 |
bootargs = "ubi.mtd=ubi"; |
| 36 |
stdout-path = "serial1:115200n8"; |
| 37 |
}; |
| 38 |
|
| 39 |
clocks { |
| 40 |
slow_xtal { |
| 41 |
clock-frequency = <32768>; |
| 42 |
}; |
| 43 |
|
| 44 |
main_xtal { |
| 45 |
clock-frequency = <12000000>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
vdd_adc_vddana: supply_3v3_ana { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "adc-vddana"; |
| 52 |
regulator-min-microvolt = <3300000>; |
| 53 |
regulator-max-microvolt = <3300000>; |
| 54 |
regulator-always-on; |
| 55 |
}; |
| 56 |
|
| 57 |
vdd_adc_vref: supply_3v3_ref { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "adc-vref"; |
| 60 |
regulator-min-microvolt = <3300000>; |
| 61 |
regulator-max-microvolt = <3300000>; |
| 62 |
regulator-always-on; |
| 63 |
}; |
| 64 |
|
| 65 |
led-controller-1 { |
| 66 |
compatible = "pwm-leds"; |
| 67 |
pinctrl-names = "default"; |
| 68 |
pinctrl-0 = <&pinctrl_pwm0_pwm_h0 |
| 69 |
&pinctrl_pwm0_pwm_h1 |
| 70 |
&pinctrl_pwm0_pwm_h2 |
| 71 |
&pinctrl_pwm0_pwm_h3>; |
| 72 |
status = "disabled"; |
| 73 |
|
| 74 |
led-1 { |
| 75 |
label = "pwm:red:user"; |
| 76 |
pwms = <&pwm0 0 10000000 0>; |
| 77 |
max-brightness = <255>; |
| 78 |
linux,default-trigger = "default-on"; |
| 79 |
status = "disabled"; |
| 80 |
}; |
| 81 |
|
| 82 |
led-2 { |
| 83 |
label = "pwm:green:user"; |
| 84 |
pwms = <&pwm0 1 10000000 0>; |
| 85 |
max-brightness = <255>; |
| 86 |
linux,default-trigger = "default-on"; |
| 87 |
status = "disabled"; |
| 88 |
}; |
| 89 |
|
| 90 |
led-3 { |
| 91 |
label = "pwm:blue:user"; |
| 92 |
pwms = <&pwm0 2 10000000 0>; |
| 93 |
max-brightness = <255>; |
| 94 |
status = "disabled"; |
| 95 |
}; |
| 96 |
|
| 97 |
led-4 { |
| 98 |
label = "pwm:white:user"; |
| 99 |
pwms = <&pwm0 3 10000000 0>; |
| 100 |
max-brightness = <255>; |
| 101 |
status = "disabled"; |
| 102 |
}; |
| 103 |
}; |
| 104 |
}; |
| 105 |
|
| 106 |
&ebi { |
| 107 |
status = "okay"; |
| 108 |
}; |
| 109 |
|
| 110 |
&nand_controller { |
| 111 |
status = "okay"; |
| 112 |
|
| 113 |
nand@3 { |
| 114 |
pinctrl-0 = <&pinctrl_ebi_nand_addr>; |
| 115 |
pinctrl-names = "default"; |
| 116 |
reg = <0x3 0x0 0x800000>; |
| 117 |
|
| 118 |
atmel,rb = <0>; |
| 119 |
nand-bus-width = <8>; |
| 120 |
nand-ecc-mode = "hw"; |
| 121 |
nand-ecc-strength = <4>; |
| 122 |
nand-ecc-step-size = <512>; |
| 123 |
nand-on-flash-bbt; |
| 124 |
label = "atmel_nand"; |
| 125 |
|
| 126 |
partitions { |
| 127 |
compatible = "fixed-partitions"; |
| 128 |
#address-cells = <1>; |
| 129 |
#size-cells = <1>; |
| 130 |
|
| 131 |
bootstrap@0 { |
| 132 |
label = "bootstrap"; |
| 133 |
reg = <0x0 0x20000>; |
| 134 |
}; |
| 135 |
|
| 136 |
u-boot@20000 { |
| 137 |
label = "u-boot"; |
| 138 |
reg = <0x20000 0x140000>; |
| 139 |
}; |
| 140 |
|
| 141 |
u-boot-factory@160000 { |
| 142 |
label = "u-boot-factory"; |
| 143 |
reg = <0x160000 0x140000>; |
| 144 |
}; |
| 145 |
|
| 146 |
ubi@2A0000 { |
| 147 |
label = "ubi"; |
| 148 |
reg = <0x2A0000 0x7D60000>; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
&rtc { |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
&pioA { |
| 160 |
pinctrl_ebi_nand_addr: ebi-addr-1 { |
| 161 |
pinmux = <PIN_PA0__D0>, |
| 162 |
<PIN_PA1__D1>, |
| 163 |
<PIN_PA2__D2>, |
| 164 |
<PIN_PA3__D3>, |
| 165 |
<PIN_PA4__D4>, |
| 166 |
<PIN_PA5__D5>, |
| 167 |
<PIN_PA6__D6>, |
| 168 |
<PIN_PA7__D7>, |
| 169 |
<PIN_PA8__NWE_NANDWE>, |
| 170 |
<PIN_PA9__NCS3>, |
| 171 |
<PIN_PA10__A21_NANDALE>, |
| 172 |
<PIN_PA11__A22_NANDCLE>, |
| 173 |
<PIN_PA21__NANDRDY>; |
| 174 |
bias-disable; |
| 175 |
}; |
| 176 |
|
| 177 |
pinctrl_usart { |
| 178 |
pinctrl_usart_0: usart0-0 { |
| 179 |
pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>; |
| 180 |
bias-disable; |
| 181 |
}; |
| 182 |
pinctrl_usart_1: usart1-0 { |
| 183 |
pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>; |
| 184 |
bias-disable; |
| 185 |
}; |
| 186 |
pinctrl_usart_2: usart2-0 { |
| 187 |
pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>; |
| 188 |
bias-disable; |
| 189 |
}; |
| 190 |
pinctrl_usart_3: usart3-0 { |
| 191 |
pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>; |
| 192 |
bias-disable; |
| 193 |
}; |
| 194 |
pinctrl_usart_4: usart4-0 { |
| 195 |
pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>; |
| 196 |
bias-disable; |
| 197 |
}; |
| 198 |
pinctrl_flx0_default: flx0_usart_default { |
| 199 |
pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX |
| 200 |
<PIN_PB29__FLEXCOM0_IO1>; //RX |
| 201 |
bias-disable; |
| 202 |
}; |
| 203 |
pinctrl_flx3_default: flx3_usart_default { |
| 204 |
pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX |
| 205 |
<PIN_PB23__FLEXCOM3_IO0>; //TX |
| 206 |
bias-disable; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
pinctrl_flx4_default: flx4_i2c6_default { |
| 211 |
pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA |
| 212 |
<PIN_PD13__FLEXCOM4_IO1>; //CLK |
| 213 |
bias-disable; |
| 214 |
drive-open-drain; |
| 215 |
}; |
| 216 |
|
| 217 |
pinctrl_pwm0 { |
| 218 |
pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 { |
| 219 |
pinmux = <PIN_PA30__PWMH0>; |
| 220 |
bias-disable; |
| 221 |
}; |
| 222 |
pinctrl_pwm0_pwm_h1: pwm0_pwmh1 { |
| 223 |
pinmux = <PIN_PB0__PWMH1>; |
| 224 |
bias-disable; |
| 225 |
}; |
| 226 |
pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 { |
| 227 |
pinmux = <PIN_PB5__PWMH2>; |
| 228 |
bias-disable; |
| 229 |
}; |
| 230 |
pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 { |
| 231 |
pinmux = <PIN_PB7__PWMH3>; |
| 232 |
bias-disable; |
| 233 |
}; |
| 234 |
}; |
| 235 |
|
| 236 |
pinctrl_adc { |
| 237 |
pinctrl_adc2: adc2 { |
| 238 |
pinmux = <PIN_PD21__GPIO>; |
| 239 |
bias-disable; |
| 240 |
}; |
| 241 |
pinctrl_adc3: adc3 { |
| 242 |
pinmux = <PIN_PD22__GPIO>; |
| 243 |
bias-disable; |
| 244 |
}; |
| 245 |
pinctrl_adc4: adc4 { |
| 246 |
pinmux = <PIN_PD23__GPIO>; |
| 247 |
bias-disable; |
| 248 |
}; |
| 249 |
pinctrl_adc5: adc5 { |
| 250 |
pinmux = <PIN_PD24__GPIO>; |
| 251 |
bias-disable; |
| 252 |
}; |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
&uart0 { |
| 257 |
pinctrl-names = "default"; |
| 258 |
pinctrl-0 = <&pinctrl_usart_0>; |
| 259 |
atmel,use-dma-rx; |
| 260 |
atmel,use-dma-tx; |
| 261 |
status = "disabled"; |
| 262 |
}; |
| 263 |
|
| 264 |
/* debug uart */ |
| 265 |
&uart1 { |
| 266 |
pinctrl-names = "default"; |
| 267 |
pinctrl-0 = <&pinctrl_usart_1>; |
| 268 |
atmel,use-dma-rx; |
| 269 |
atmel,use-dma-tx; |
| 270 |
status = "disabled"; |
| 271 |
}; |
| 272 |
|
| 273 |
&uart2 { |
| 274 |
pinctrl-names = "default"; |
| 275 |
pinctrl-0 = <&pinctrl_usart_2>; |
| 276 |
atmel,use-dma-rx; |
| 277 |
atmel,use-dma-tx; |
| 278 |
status = "disabled"; |
| 279 |
}; |
| 280 |
|
| 281 |
&uart3 { |
| 282 |
pinctrl-names = "default"; |
| 283 |
pinctrl-0 = <&pinctrl_usart_3>; |
| 284 |
atmel,use-dma-rx; |
| 285 |
atmel,use-dma-tx; |
| 286 |
status = "disabled"; |
| 287 |
}; |
| 288 |
|
| 289 |
&uart4 { |
| 290 |
pinctrl-names = "default"; |
| 291 |
pinctrl-0 = <&pinctrl_usart_4>; |
| 292 |
atmel,use-dma-rx; |
| 293 |
atmel,use-dma-tx; |
| 294 |
status = "disabled"; |
| 295 |
}; |
| 296 |
|
| 297 |
&flx0 { |
| 298 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; |
| 299 |
status = "disabled"; |
| 300 |
|
| 301 |
uart5: serial@200 { |
| 302 |
pinctrl-names = "default"; |
| 303 |
pinctrl-0 = <&pinctrl_flx0_default>; |
| 304 |
atmel,use-dma-rx; |
| 305 |
atmel,use-dma-tx; |
| 306 |
status = "disabled"; |
| 307 |
}; |
| 308 |
}; |
| 309 |
|
| 310 |
&flx3 { |
| 311 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; |
| 312 |
status = "disabled"; |
| 313 |
|
| 314 |
uart8: serial@200 { |
| 315 |
pinctrl-names = "default"; |
| 316 |
pinctrl-0 = <&pinctrl_flx3_default>; |
| 317 |
atmel,use-dma-rx; |
| 318 |
atmel,use-dma-tx; |
| 319 |
status = "disabled"; |
| 320 |
}; |
| 321 |
}; |
| 322 |
|
| 323 |
&flx4 { |
| 324 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; |
| 325 |
status = "disabled"; |
| 326 |
|
| 327 |
i2c6: i2c@600 { |
| 328 |
pinctrl-names = "default"; |
| 329 |
pinctrl-0 = <&pinctrl_flx4_default>; |
| 330 |
status = "disabled"; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
&pwm0 { |
| 335 |
status = "okay"; |
| 336 |
}; |
| 337 |
|
| 338 |
&shutdown_controller { |
| 339 |
debounce-delay-us = <976>; |
| 340 |
atmel,wakeup-rtc-timer; |
| 341 |
|
| 342 |
input@0 { |
| 343 |
reg = <0>; |
| 344 |
}; |
| 345 |
}; |
| 346 |
|
| 347 |
&watchdog { |
| 348 |
status = "okay"; |
| 349 |
}; |
| 350 |
|
| 351 |
&adc { |
| 352 |
pinctrl-names = "default"; |
| 353 |
pinctrl-0 = <&pinctrl_adc2 |
| 354 |
&pinctrl_adc3 |
| 355 |
&pinctrl_adc4 |
| 356 |
&pinctrl_adc5>; |
| 357 |
|
| 358 |
vddana-supply = <&vdd_adc_vddana>; |
| 359 |
vref-supply = <&vdd_adc_vref>; |
| 360 |
status = "disabled"; |
| 361 |
}; |
| 362 |
|
| 363 |
&securam { |
| 364 |
export; |
| 365 |
|
| 366 |
/* export overkiz u-boot mode/version and factory */ |
| 367 |
uboot@1400 { |
| 368 |
reg = <0x1400 0x20>; |
| 369 |
export; |
| 370 |
}; |
| 371 |
}; |