| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board |
| 4 |
* |
| 5 |
* Copyright (C) 2017 Axentia Technologies AB |
| 6 |
* |
| 7 |
* Author: Peter Rosin <[email protected]> |
| 8 |
*/ |
| 9 |
/dts-v1/; |
| 10 |
#include "at91-linea.dtsi" |
| 11 |
#include "at91-natte.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Axentia Linea-Nattis v2 Natte v2"; |
| 15 |
compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", |
| 16 |
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; |
| 17 |
|
| 18 |
gpio-keys { |
| 19 |
compatible = "gpio-keys"; |
| 20 |
|
| 21 |
key-wakeup { |
| 22 |
label = "Wakeup"; |
| 23 |
linux,code = <10>; |
| 24 |
wakeup-source; |
| 25 |
gpios = <&pioB 27 GPIO_ACTIVE_LOW>; |
| 26 |
}; |
| 27 |
}; |
| 28 |
|
| 29 |
panel_reg: panel-regulator { |
| 30 |
compatible = "regulator-fixed"; |
| 31 |
regulator-name = "panel-VCC"; |
| 32 |
regulator-min-microvolt = <3300000>; |
| 33 |
regulator-max-microvolt = <3300000>; |
| 34 |
}; |
| 35 |
|
| 36 |
bl_reg: backlight-regulator { |
| 37 |
compatible = "regulator-fixed"; |
| 38 |
regulator-name = "panel-VDD"; |
| 39 |
regulator-min-microvolt = <12000000>; |
| 40 |
regulator-max-microvolt = <12000000>; |
| 41 |
}; |
| 42 |
|
| 43 |
panel_bl: backlight { |
| 44 |
compatible = "pwm-backlight"; |
| 45 |
pwms = <&hlcdc_pwm 0 100000 0>; |
| 46 |
|
| 47 |
brightness-levels = < 0 1 2 3 4 5 6 7 8 9 |
| 48 |
10 11 12 13 14 15 16 17 18 19 |
| 49 |
20 21 22 23 24 25 26 27 28 29 |
| 50 |
30 31 32 33 34 35 36 37 38 39 |
| 51 |
40 41 42 43 44 45 46 47 48 49 |
| 52 |
50 51 52 53 54 55 56 57 58 59 |
| 53 |
60 61 62 63 64 65 66 67 68 69 |
| 54 |
70 71 72 73 74 75 76 77 78 79 |
| 55 |
80 81 82 83 84 85 86 87 88 89 |
| 56 |
90 91 92 93 94 95 96 97 98 99 |
| 57 |
100>; |
| 58 |
default-brightness-level = <40>; |
| 59 |
|
| 60 |
power-supply = <&bl_reg>; |
| 61 |
enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; |
| 62 |
pinctrl-names = "default"; |
| 63 |
pinctrl-0 = <&pinctrl_blon>; |
| 64 |
}; |
| 65 |
|
| 66 |
panel: panel { |
| 67 |
compatible = "sharp,lq150x1lg11", "panel-lvds"; |
| 68 |
|
| 69 |
backlight = <&panel_bl>; |
| 70 |
power-supply = <&panel_reg>; |
| 71 |
|
| 72 |
width-mm = <304>; |
| 73 |
height-mm = <228>; |
| 74 |
|
| 75 |
data-mapping = "jeida-18"; |
| 76 |
|
| 77 |
panel-timing { |
| 78 |
// 1024x768 @ 60Hz (typical) |
| 79 |
clock-frequency = <50000000 65000000 80000000>; |
| 80 |
hactive = <1024>; |
| 81 |
vactive = <768>; |
| 82 |
hfront-porch = <48 88 88>; |
| 83 |
hback-porch = <96 168 168>; |
| 84 |
hsync-len = <32 64 64>; |
| 85 |
vsync-len = <3 13 74>; |
| 86 |
vfront-porch = <3 13 74>; |
| 87 |
vback-porch = <3 12 74>; |
| 88 |
}; |
| 89 |
|
| 90 |
port { |
| 91 |
panel_input: endpoint { |
| 92 |
remote-endpoint = <&lvds_encoder_output>; |
| 93 |
}; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
lvds-encoder { |
| 98 |
compatible = "ti,ds90c185", "lvds-encoder"; |
| 99 |
|
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>; |
| 102 |
|
| 103 |
ports { |
| 104 |
#address-cells = <1>; |
| 105 |
#size-cells = <0>; |
| 106 |
|
| 107 |
port@0 { |
| 108 |
reg = <0>; |
| 109 |
|
| 110 |
lvds_encoder_input: endpoint { |
| 111 |
remote-endpoint = <&hlcdc_output>; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
port@1 { |
| 116 |
reg = <1>; |
| 117 |
|
| 118 |
lvds_encoder_output: endpoint { |
| 119 |
remote-endpoint = <&panel_input>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
sound { |
| 126 |
compatible = "simple-audio-card"; |
| 127 |
|
| 128 |
simple-audio-card,name = "nattis-tfa9879"; |
| 129 |
simple-audio-card,format = "i2s"; |
| 130 |
simple-audio-card,bitclock-master = <&cpu_dai>; |
| 131 |
simple-audio-card,frame-master = <&cpu_dai>; |
| 132 |
simple-audio-card,widgets = "Line", "Line Out Jack"; |
| 133 |
simple-audio-card,routing = "Line Out Jack", "LINEOUT"; |
| 134 |
|
| 135 |
cpu_dai: simple-audio-card,cpu { |
| 136 |
sound-dai = <&ssc0>; |
| 137 |
}; |
| 138 |
|
| 139 |
simple-audio-card,codec { |
| 140 |
sound-dai = <&>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
&pinctrl { |
| 146 |
nattis { |
| 147 |
pinctrl_usba_vbus: usba_vbus { |
| 148 |
atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO |
| 149 |
AT91_PINCTRL_DEGLITCH>; |
| 150 |
}; |
| 151 |
|
| 152 |
pinctrl_mmc0_cd: mmc0_cd { |
| 153 |
atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO |
| 154 |
AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 155 |
}; |
| 156 |
|
| 157 |
pinctrl_lvds_prlud0: lvds_prlud0 { |
| 158 |
atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO |
| 159 |
(AT91_PINCTRL_OUTPUT | |
| 160 |
AT91_PINCTRL_OUTPUT_VAL(0))>; |
| 161 |
}; |
| 162 |
|
| 163 |
pinctrl_lvds_hipow0: lvds_hipow0 { |
| 164 |
atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO |
| 165 |
(AT91_PINCTRL_OUTPUT | |
| 166 |
AT91_PINCTRL_OUTPUT_VAL(0))>; |
| 167 |
}; |
| 168 |
|
| 169 |
pinctrl_blon: blon { |
| 170 |
atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO |
| 171 |
(AT91_PINCTRL_OUTPUT | |
| 172 |
AT91_PINCTRL_OUTPUT_VAL(0))>; |
| 173 |
}; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
&watchdog { |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&i2c0 { |
| 182 |
status = "okay"; |
| 183 |
|
| 184 |
clock-frequency = <100000>; |
| 185 |
|
| 186 |
temp@18 { |
| 187 |
compatible = "nxp,se97b", "jedec,jc-42.4-temp"; |
| 188 |
reg = <0x18>; |
| 189 |
smbus-timeout-disable; |
| 190 |
}; |
| 191 |
|
| 192 |
eeprom@50 { |
| 193 |
compatible = "nxp,se97b", "atmel,24c02"; |
| 194 |
reg = <0x50>; |
| 195 |
pagesize = <16>; |
| 196 |
}; |
| 197 |
|
| 198 |
amp: amplifier@6c { |
| 199 |
compatible = "nxp,tfa9879"; |
| 200 |
reg = <0x6c>; |
| 201 |
#sound-dai-cells = <0>; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
&ssc0 { |
| 206 |
status = "okay"; |
| 207 |
|
| 208 |
atmel,clk-from-rk-pin; |
| 209 |
#sound-dai-cells = <0>; |
| 210 |
}; |
| 211 |
|
| 212 |
&hlcdc { |
| 213 |
status = "okay"; |
| 214 |
|
| 215 |
hlcdc-display-controller { |
| 216 |
pinctrl-names = "default"; |
| 217 |
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; |
| 218 |
|
| 219 |
port@0 { |
| 220 |
hlcdc_output: endpoint { |
| 221 |
remote-endpoint = <&lvds_encoder_input>; |
| 222 |
bus-width = <16>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |
| 227 |
|
| 228 |
&mmc0 { |
| 229 |
status = "okay"; |
| 230 |
|
| 231 |
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 |
| 232 |
&pinctrl_mmc0_dat1_3 |
| 233 |
&pinctrl_mmc0_cd>; |
| 234 |
|
| 235 |
slot@0 { |
| 236 |
reg = <0>; |
| 237 |
bus-width = <4>; |
| 238 |
cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; |
| 239 |
cd-inverted; |
| 240 |
}; |
| 241 |
}; |
| 242 |
|
| 243 |
&usart0 { |
| 244 |
status = "okay"; |
| 245 |
|
| 246 |
pinctrl-names = "default"; |
| 247 |
pinctrl-0 = <&pinctrl_usart0>; |
| 248 |
atmel,use-dma-rx; |
| 249 |
}; |
| 250 |
|
| 251 |
&nand { |
| 252 |
partitions { |
| 253 |
compatible = "fixed-partitions"; |
| 254 |
#address-cells = <1>; |
| 255 |
#size-cells = <1>; |
| 256 |
|
| 257 |
at91bootstrap@0 { |
| 258 |
label = "at91bootstrap"; |
| 259 |
reg = <0x0 0x40000>; |
| 260 |
}; |
| 261 |
|
| 262 |
barebox@40000 { |
| 263 |
label = "barebox"; |
| 264 |
reg = <0x40000 0x60000>; |
| 265 |
}; |
| 266 |
|
| 267 |
bareboxenv@c0000 { |
| 268 |
label = "bareboxenv"; |
| 269 |
reg = <0xc0000 0x40000>; |
| 270 |
}; |
| 271 |
|
| 272 |
bareboxenv2@100000 { |
| 273 |
label = "bareboxenv2"; |
| 274 |
reg = <0x100000 0x40000>; |
| 275 |
}; |
| 276 |
|
| 277 |
oftree@180000 { |
| 278 |
label = "oftree"; |
| 279 |
reg = <0x180000 0x20000>; |
| 280 |
}; |
| 281 |
|
| 282 |
kernel@200000 { |
| 283 |
label = "kernel"; |
| 284 |
reg = <0x200000 0x500000>; |
| 285 |
}; |
| 286 |
|
| 287 |
rootfs@800000 { |
| 288 |
label = "rootfs"; |
| 289 |
reg = <0x800000 0x1f800000>; |
| 290 |
}; |
| 291 |
}; |
| 292 |
}; |
| 293 |
|
| 294 |
&dbgu { |
| 295 |
status = "okay"; |
| 296 |
|
| 297 |
atmel,use-dma-rx; |
| 298 |
}; |
| 299 |
|
| 300 |
&usb0 { |
| 301 |
status = "okay"; |
| 302 |
|
| 303 |
atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>; |
| 304 |
pinctrl-names = "default"; |
| 305 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 306 |
}; |