Debian Codegraph @

arch/arm/boot/dts/microchip/sama7g5.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
4 *
5 * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
6 *
7 * Author: Eugen Hristev <[email protected]>
8 * Author: Claudiu Beznea <[email protected]>
9 *
10 */
11
12 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/interrupt-controller/arm-gic.h>
15 #include <dt-bindings/clock/at91.h>
16 #include <dt-bindings/dma/at91.h>
17 #include <dt-bindings/gpio/gpio.h>
18 #include <dt-bindings/mfd/at91-usart.h>
19 #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
20 #include <dt-bindings/thermal/thermal.h>
21
22 / {
23 model = "Microchip SAMA7G5 family SoC";
24 compatible = "microchip,sama7g5";
25 #address-cells = <1>;
26 #size-cells = <1>;
27 interrupt-parent = <&gic>;
28
29 cpus {
30 #address-cells = <1>;
31 #size-cells = <0>;
32
33 cpu0: cpu@0 {
34 device_type = "cpu";
35 compatible = "arm,cortex-a7";
36 reg = <0x0>;
37 clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
38 clock-names = "cpu";
39 operating-points-v2 = <&cpu_opp_table>;
40 #cooling-cells = <2>; /* min followed by max */
41 d-cache-size = <0x8000>; // L1, 32 KB
42 i-cache-size = <0x8000>; // L1, 32 KB
43 next-level-cache = <&L2>;
44
45 L2: l2-cache {
46 compatible = "cache";
47 cache-level = <2>;
48 cache-size = <0x40000>; // L2, 256 KB
49 cache-unified;
50 };
51 };
52 };
53
54 cpu_opp_table: opp-table {
55 compatible = "operating-points-v2";
56
57 opp-90000000 {
58 opp-hz = /bits/ 64 <90000000>;
59 opp-microvolt = <1050000 1050000 1225000>;
60 clock-latency-ns = <320000>;
61 };
62
63 opp-250000000 {
64 opp-hz = /bits/ 64 <250000000>;
65 opp-microvolt = <1050000 1050000 1225000>;
66 clock-latency-ns = <320000>;
67 };
68
69 opp-600000000 {
70 opp-hz = /bits/ 64 <600000000>;
71 opp-microvolt = <1050000 1050000 1225000>;
72 clock-latency-ns = <320000>;
73 opp-suspend;
74 };
75
76 opp-800000000 {
77 opp-hz = /bits/ 64 <800000000>;
78 opp-microvolt = <1150000 1125000 1225000>;
79 clock-latency-ns = <320000>;
80 };
81
82 opp-1000000002 {
83 opp-hz = /bits/ 64 <1000000002>;
84 opp-microvolt = <1250000 1225000 1300000>;
85 clock-latency-ns = <320000>;
86 };
87 };
88
89 thermal-zones {
90 cpu_thermal: cpu-thermal {
91 polling-delay-passive = <1000>;
92 polling-delay = <5000>;
93 thermal-sensors = <&thermal_sensor>;
94
95 trips {
96 cpu_normal: cpu-alert0 {
97 temperature = <90000>;
98 hysteresis = <0>;
99 type = "passive";
100 };
101
102 cpu_hot: cpu-alert1 {
103 temperature = <95000>;
104 hysteresis = <0>;
105 type = "passive";
106 };
107
108 cpu_critical: cpu-critical {
109 temperature = <100000>;
110 hysteresis = <0>;
111 type = "critical";
112 };
113 };
114
115 cooling-maps {
116 map0 {
117 trip = <&cpu_normal>;
118 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
119 };
120
121 map1 {
122 trip = <&cpu_hot>;
123 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
124 };
125 };
126 };
127 };
128
129 clocks {
130 slow_xtal: clock-slowxtal {
131 compatible = "fixed-clock";
132 clock-output-names = "slow_xtal";
133 #clock-cells = <0>;
134 };
135
136 main_xtal: clock-mainxtal {
137 compatible = "fixed-clock";
138 clock-output-names = "main_xtal";
139 #clock-cells = <0>;
140 };
141
142 usb_clk: clock-usbclk {
143 compatible = "fixed-clock";
144 #clock-cells = <0>;
145 clock-output-names = "usb_clk";
146 clock-frequency = <48000000>;
147 };
148 };
149
150 vddout25: fixed-regulator-vddout25 {
151 compatible = "regulator-fixed";
152
153 regulator-name = "VDDOUT25";
154 regulator-min-microvolt = <2500000>;
155 regulator-max-microvolt = <2500000>;
156 regulator-boot-on;
157 status = "disabled";
158 };
159
160 ns_sram: sram@100000 {
161 compatible = "mmio-sram";
162 #address-cells = <1>;
163 #size-cells = <1>;
164 reg = <0x100000 0x20000>;
165 ranges;
166 };
167
168 thermal_sensor: thermal-sensor {
169 compatible = "generic-adc-thermal";
170 #thermal-sensor-cells = <0>;
171 io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
172 io-channel-names = "sensor-channel";
173 };
174
175 soc {
176 compatible = "simple-bus";
177 #address-cells = <1>;
178 #size-cells = <1>;
179 ranges;
180
181 nfc_sram: sram@600000 {
182 compatible = "mmio-sram";
183 no-memory-wc;
184 reg = <0x00600000 0x2400>;
185 #address-cells = <1>;
186 #size-cells = <1>;
187 ranges = <0 0x00600000 0x2400>;
188 };
189
190 nfc_io: nfc-io@10000000 {
191 compatible = "atmel,sama5d3-nfc-io", "syscon";
192 reg = <0x10000000 0x8000000>;
193 };
194
195 ebi: ebi@40000000 {
196 compatible = "atmel,sama5d3-ebi";
197 #address-cells = <2>;
198 #size-cells = <1>;
199 atmel,smc = <&hsmc>;
200 reg = <0x40000000 0x20000000>;
201 ranges = <0x0 0x0 0x40000000 0x8000000
202 0x1 0x0 0x48000000 0x8000000
203 0x2 0x0 0x50000000 0x8000000
204 0x3 0x0 0x58000000 0x8000000>;
205 clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
206 status = "disabled";
207
208 nand_controller: nand-controller {
209 compatible = "atmel,sama5d3-nand-controller";
210 atmel,nfc-sram = <&nfc_sram>;
211 atmel,nfc-io = <&nfc_io>;
212 ecc-engine = <&pmecc>;
213 #address-cells = <2>;
214 #size-cells = <1>;
215 ranges;
216 status = "disabled";
217 };
218 };
219
220 securam: sram@e0000000 {
221 compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
222 reg = <0xe0000000 0x4000>;
223 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
224 #address-cells = <1>;
225 #size-cells = <1>;
226 ranges = <0 0xe0000000 0x4000>;
227 no-memory-wc;
228 };
229
230 secumod: secumod@e0004000 {
231 compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
232 reg = <0xe0004000 0x4000>;
233 gpio-controller;
234 #gpio-cells = <2>;
235 };
236
237 sfrbu: sfr@e0008000 {
238 compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
239 reg = <0xe0008000 0x20>;
240 };
241
242 pioA: pinctrl@e0014000 {
243 compatible = "microchip,sama7g5-pinctrl";
244 reg = <0xe0014000 0x800>;
245 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
246 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
247 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
248 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
249 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
250 interrupt-controller;
251 #interrupt-cells = <2>;
252 gpio-controller;
253 #gpio-cells = <2>;
254 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
255 };
256
257 pmc: clock-controller@e0018000 {
258 compatible = "microchip,sama7g5-pmc", "syscon";
259 reg = <0xe0018000 0x200>;
260 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
261 #clock-cells = <2>;
262 clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
263 clock-names = "td_slck", "md_slck", "main_xtal";
264 };
265
266 reset_controller: reset-controller@e001d000 {
267 compatible = "microchip,sama7g5-rstc";
268 reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
269 #reset-cells = <1>;
270 clocks = <&clk32k 0>;
271 };
272
273 shdwc: poweroff@e001d010 {
274 compatible = "microchip,sama7g5-shdwc", "syscon";
275 reg = <0xe001d010 0x10>;
276 clocks = <&clk32k 0>;
277 #address-cells = <1>;
278 #size-cells = <0>;
279 atmel,wakeup-rtc-timer;
280 atmel,wakeup-rtt-timer;
281 status = "disabled";
282 };
283
284 rtt: rtc@e001d020 {
285 compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
286 reg = <0xe001d020 0x30>;
287 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
288 clocks = <&clk32k 1>;
289 };
290
291 clk32k: clock-controller@e001d050 {
292 compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
293 reg = <0xe001d050 0x4>;
294 clocks = <&slow_xtal>;
295 #clock-cells = <1>;
296 };
297
298 gpbr: gpbr@e001d060 {
299 compatible = "microchip,sama7g5-gpbr", "syscon";
300 reg = <0xe001d060 0x48>;
301 };
302
303 rtc: rtc@e001d0a8 {
304 compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
305 reg = <0xe001d0a8 0x30>;
306 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
307 clocks = <&clk32k 1>;
308 };
309
310 ps_wdt: watchdog@e001d180 {
311 compatible = "microchip,sama7g5-wdt";
312 reg = <0xe001d180 0x24>;
313 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
314 clocks = <&clk32k 0>;
315 };
316
317 chipid@e0020000 {
318 compatible = "microchip,sama7g5-chipid";
319 reg = <0xe0020000 0x8>;
320 };
321
322 tcb1: timer@e0800000 {
323 compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
324 #address-cells = <1>;
325 #size-cells = <0>;
326 reg = <0xe0800000 0x100>;
327 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
328 clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
329 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
330 };
331
332 hsmc: hsmc@e0808000 {
333 compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
334 reg = <0xe0808000 0x1000>;
335 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
336 clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
337 #address-cells = <1>;
338 #size-cells = <1>;
339 ranges;
340
341 pmecc: ecc-engine@e0808070 {
342 compatible = "atmel,sama5d2-pmecc";
343 reg = <0xe0808070 0x490>,
344 <0xe0808500 0x200>;
345 };
346 };
347
348 qspi0: spi@e080c000 {
349 compatible = "microchip,sama7g5-ospi";
350 reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
351 reg-names = "qspi_base", "qspi_mmap";
352 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
353 dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
354 <&dma0 AT91_XDMAC_DT_PERID(40)>;
355 dma-names = "tx", "rx";
356 clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
357 clock-names = "pclk", "gclk";
358 #address-cells = <1>;
359 #size-cells = <0>;
360 status = "disabled";
361 };
362
363 qspi1: spi@e0810000 {
364 compatible = "microchip,sama7g5-qspi";
365 reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
366 reg-names = "qspi_base", "qspi_mmap";
367 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
368 dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
369 <&dma0 AT91_XDMAC_DT_PERID(42)>;
370 dma-names = "tx", "rx";
371 clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
372 clock-names = "pclk", "gclk";
373 #address-cells = <1>;
374 #size-cells = <0>;
375 status = "disabled";
376 };
377
378 can0: can@e0828000 {
379 compatible = "bosch,m_can";
380 reg = <0xe0828000 0x100>, <0x100000 0x7800>;
381 reg-names = "m_can", "message_ram";
382 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
383 <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
384 interrupt-names = "int0", "int1";
385 clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
386 clock-names = "hclk", "cclk";
387 assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
388 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
389 assigned-clock-rates = <40000000>;
390 bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
391 status = "disabled";
392 };
393
394 can1: can@e082c000 {
395 compatible = "bosch,m_can";
396 reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
397 reg-names = "m_can", "message_ram";
398 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
399 <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
400 interrupt-names = "int0", "int1";
401 clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
402 clock-names = "hclk", "cclk";
403 assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
404 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
405 assigned-clock-rates = <40000000>;
406 bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
407 status = "disabled";
408 };
409
410 can2: can@e0830000 {
411 compatible = "bosch,m_can";
412 reg = <0xe0830000 0x100>, <0x100000 0x10000>;
413 reg-names = "m_can", "message_ram";
414 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
415 <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
416 interrupt-names = "int0", "int1";
417 clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
418 clock-names = "hclk", "cclk";
419 assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
420 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
421 assigned-clock-rates = <40000000>;
422 bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
423 status = "disabled";
424 };
425
426 can3: can@e0834000 {
427 compatible = "bosch,m_can";
428 reg = <0xe0834000 0x100>, <0x110000 0x4400>;
429 reg-names = "m_can", "message_ram";
430 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
431 <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
432 interrupt-names = "int0", "int1";
433 clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
434 clock-names = "hclk", "cclk";
435 assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
436 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
437 assigned-clock-rates = <40000000>;
438 bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
439 status = "disabled";
440 };
441
442 can4: can@e0838000 {
443 compatible = "bosch,m_can";
444 reg = <0xe0838000 0x100>, <0x110000 0x8800>;
445 reg-names = "m_can", "message_ram";
446 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
447 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
448 interrupt-names = "int0", "int1";
449 clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
450 clock-names = "hclk", "cclk";
451 assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
452 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
453 assigned-clock-rates = <40000000>;
454 bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
455 status = "disabled";
456 };
457
458 can5: can@e083c000 {
459 compatible = "bosch,m_can";
460 reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
461 reg-names = "m_can", "message_ram";
462 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
463 <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
464 interrupt-names = "int0", "int1";
465 clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
466 clock-names = "hclk", "cclk";
467 assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
468 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
469 assigned-clock-rates = <40000000>;
470 bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
471 status = "disabled";
472 };
473
474 adc: adc@e1000000 {
475 compatible = "microchip,sama7g5-adc";
476 reg = <0xe1000000 0x200>;
477 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
478 clocks = <&pmc PMC_TYPE_GCK 26>;
479 assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
480 assigned-clock-rates = <100000000>;
481 clock-names = "adc_clk";
482 dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
483 dma-names = "rx";
484 atmel,min-sample-rate-hz = <200000>;
485 atmel,max-sample-rate-hz = <20000000>;
486 atmel,startup-time-ms = <4>;
487 #io-channel-cells = <1>;
488 nvmem-cells = <&temperature_calib>;
489 nvmem-cell-names = "temperature_calib";
490 status = "disabled";
491 };
492
493 sdmmc0: mmc@e1204000 {
494 compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
495 reg = <0xe1204000 0x4000>;
496 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
497 clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
498 clock-names = "hclock", "multclk";
499 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
500 assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
501 assigned-clock-rates = <200000000>;
502 microchip,sdcal-inverted;
503 status = "disabled";
504 };
505
506 sdmmc1: mmc@e1208000 {
507 compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
508 reg = <0xe1208000 0x4000>;
509 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
510 clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
511 clock-names = "hclock", "multclk";
512 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
513 assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
514 assigned-clock-rates = <200000000>;
515 microchip,sdcal-inverted;
516 status = "disabled";
517 };
518
519 sdmmc2: mmc@e120c000 {
520 compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
521 reg = <0xe120c000 0x4000>;
522 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
523 clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
524 clock-names = "hclock", "multclk";
525 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
526 assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
527 assigned-clock-rates = <200000000>;
528 microchip,sdcal-inverted;
529 status = "disabled";
530 };
531
532 csi2dc: csi2dc@e1404000 {
533 compatible = "microchip,sama7g5-csi2dc";
534 reg = <0xe1404000 0x500>;
535 clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
536 clock-names = "pclk", "scck";
537 assigned-clocks = <&xisc>;
538 assigned-clock-rates = <266000000>;
539 status = "disabled";
540
541 ports {
542 #address-cells = <1>;
543 #size-cells = <0>;
544 port@0 {
545 reg = <0>;
546 csi2dc_in: endpoint {
547 };
548 };
549
550 port@1 {
551 reg = <1>;
552 csi2dc_out: endpoint {
553 bus-width = <14>;
554 hsync-active = <1>;
555 vsync-active = <1>;
556 remote-endpoint = <&xisc_in>;
557 };
558 };
559 };
560 };
561
562 xisc: xisc@e1408000 {
563 compatible = "microchip,sama7g5-isc";
564 reg = <0xe1408000 0x2000>;
565 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
566 clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
567 clock-names = "hclock";
568 #clock-cells = <0>;
569 clock-output-names = "isc-mck";
570 status = "disabled";
571
572 port {
573 xisc_in: endpoint {
574 bus-type = <5>; /* Parallel */
575 bus-width = <14>;
576 hsync-active = <1>;
577 vsync-active = <1>;
578 remote-endpoint = <&csi2dc_out>;
579 };
580 };
581 };
582
583 pwm: pwm@e1604000 {
584 compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
585 reg = <0xe1604000 0x4000>;
586 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
587 #pwm-cells = <3>;
588 clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
589 status = "disabled";
590 };
591
592 pdmc0: sound@e1608000 {
593 compatible = "microchip,sama7g5-pdmc";
594 reg = <0xe1608000 0x1000>;
595 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
596 #sound-dai-cells = <0>;
597 dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
598 dma-names = "rx";
599 clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
600 clock-names = "pclk", "gclk";
601 status = "disabled";
602 };
603
604 pdmc1: sound@e160c000 {
605 compatible = "microchip,sama7g5-pdmc";
606 reg = <0xe160c000 0x1000>;
607 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
608 #sound-dai-cells = <0>;
609 dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
610 dma-names = "rx";
611 clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
612 clock-names = "pclk", "gclk";
613 status = "disabled";
614 };
615
616 spdifrx: spdifrx@e1614000 {
617 #sound-dai-cells = <0>;
618 compatible = "microchip,sama7g5-spdifrx";
619 reg = <0xe1614000 0x4000>;
620 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
621 dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
622 dma-names = "rx";
623 clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
624 clock-names = "pclk", "gclk";
625 status = "disabled";
626 };
627
628 spdiftx: spdiftx@e1618000 {
629 #sound-dai-cells = <0>;
630 compatible = "microchip,sama7g5-spdiftx";
631 reg = <0xe1618000 0x4000>;
632 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
633 dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
634 dma-names = "tx";
635 clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
636 clock-names = "pclk", "gclk";
637 };
638
639 i2s0: i2s@e161c000 {
640 compatible = "microchip,sama7g5-i2smcc";
641 #sound-dai-cells = <0>;
642 reg = <0xe161c000 0x4000>;
643 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
644 dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
645 dma-names = "tx", "rx";
646 clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
647 clock-names = "pclk", "gclk";
648 status = "disabled";
649 };
650
651 i2s1: i2s@e1620000 {
652 compatible = "microchip,sama7g5-i2smcc";
653 #sound-dai-cells = <0>;
654 reg = <0xe1620000 0x4000>;
655 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
656 dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
657 dma-names = "tx", "rx";
658 clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
659 clock-names = "pclk", "gclk";
660 status = "disabled";
661 };
662
663 eic: interrupt-controller@e1628000 {
664 compatible = "microchip,sama7g5-eic";
665 reg = <0xe1628000 0xec>;
666 interrupt-parent = <&gic>;
667 interrupt-controller;
668 #interrupt-cells = <2>;
669 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
670 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
671 clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
672 clock-names = "pclk";
673 status = "disabled";
674 };
675
676 pit64b0: timer@e1800000 {
677 compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
678 reg = <0xe1800000 0x4000>;
679 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
680 clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
681 clock-names = "pclk", "gclk";
682 };
683
684 pit64b1: timer@e1804000 {
685 compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
686 reg = <0xe1804000 0x4000>;
687 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
688 clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
689 clock-names = "pclk", "gclk";
690 };
691
692 aes: crypto@e1810000 {
693 compatible = "atmel,at91sam9g46-aes";
694 reg = <0xe1810000 0x100>;
695 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
696 clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
697 clock-names = "aes_clk";
698 dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
699 <&dma0 AT91_XDMAC_DT_PERID(2)>;
700 dma-names = "tx", "rx";
701 };
702
703 sha: crypto@e1814000 {
704 compatible = "atmel,at91sam9g46-sha";
705 reg = <0xe1814000 0x100>;
706 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
707 clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
708 clock-names = "sha_clk";
709 dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
710 dma-names = "tx";
711 };
712
713 flx0: flexcom@e1818000 {
714 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
715 reg = <0xe1818000 0x200>;
716 clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
717 #address-cells = <1>;
718 #size-cells = <1>;
719 ranges = <0x0 0xe1818000 0x800>;
720 status = "disabled";
721
722 uart0: serial@200 {
723 compatible = "atmel,at91sam9260-usart";
724 reg = <0x200 0x200>;
725 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
726 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
727 clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
728 clock-names = "usart";
729 dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
730 <&dma1 AT91_XDMAC_DT_PERID(5)>;
731 dma-names = "tx", "rx";
732 atmel,use-dma-rx;
733 atmel,use-dma-tx;
734 status = "disabled";
735 };
736 };
737
738 flx1: flexcom@e181c000 {
739 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
740 reg = <0xe181c000 0x200>;
741 clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
742 #address-cells = <1>;
743 #size-cells = <1>;
744 ranges = <0x0 0xe181c000 0x800>;
745 status = "disabled";
746
747 i2c1: i2c@600 {
748 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
749 reg = <0x600 0x200>;
750 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
751 #address-cells = <1>;
752 #size-cells = <0>;
753 clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
754 atmel,fifo-size = <32>;
755 dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
756 <&dma0 AT91_XDMAC_DT_PERID(7)>;
757 dma-names = "tx", "rx";
758 status = "disabled";
759 };
760 };
761
762 flx3: flexcom@e1824000 {
763 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
764 reg = <0xe1824000 0x200>;
765 clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
766 #address-cells = <1>;
767 #size-cells = <1>;
768 ranges = <0x0 0xe1824000 0x800>;
769 status = "disabled";
770
771 uart3: serial@200 {
772 compatible = "atmel,at91sam9260-usart";
773 reg = <0x200 0x200>;
774 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
775 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
776 clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
777 clock-names = "usart";
778 dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
779 <&dma1 AT91_XDMAC_DT_PERID(11)>;
780 dma-names = "tx", "rx";
781 atmel,use-dma-rx;
782 atmel,use-dma-tx;
783 status = "disabled";
784 };
785 };
786
787 trng: rng@e2010000 {
788 compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
789 reg = <0xe2010000 0x100>;
790 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
791 clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
792 status = "disabled";
793 };
794
795 tdes: crypto@e2014000 {
796 compatible = "atmel,at91sam9g46-tdes";
797 reg = <0xe2014000 0x100>;
798 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
799 clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
800 clock-names = "tdes_clk";
801 dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
802 <&dma0 AT91_XDMAC_DT_PERID(53)>;
803 dma-names = "tx", "rx";
804 };
805
806 flx4: flexcom@e2018000 {
807 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
808 reg = <0xe2018000 0x200>;
809 clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
810 #address-cells = <1>;
811 #size-cells = <1>;
812 ranges = <0x0 0xe2018000 0x800>;
813 status = "disabled";
814
815 uart4: serial@200 {
816 compatible = "atmel,at91sam9260-usart";
817 reg = <0x200 0x200>;
818 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
819 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
820 clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
821 clock-names = "usart";
822 dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
823 <&dma1 AT91_XDMAC_DT_PERID(13)>;
824 dma-names = "tx", "rx";
825 atmel,use-dma-rx;
826 atmel,use-dma-tx;
827 atmel,fifo-size = <32>;
828 status = "disabled";
829 };
830 };
831
832 flx7: flexcom@e2024000 {
833 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
834 reg = <0xe2024000 0x200>;
835 clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
836 #address-cells = <1>;
837 #size-cells = <1>;
838 ranges = <0x0 0xe2024000 0x800>;
839 status = "disabled";
840
841 uart7: serial@200 {
842 compatible = "atmel,at91sam9260-usart";
843 reg = <0x200 0x200>;
844 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
845 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
846 clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
847 clock-names = "usart";
848 dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
849 <&dma1 AT91_XDMAC_DT_PERID(19)>;
850 dma-names = "tx", "rx";
851 atmel,use-dma-rx;
852 atmel,use-dma-tx;
853 atmel,fifo-size = <32>;
854 status = "disabled";
855 };
856 };
857
858 gmac0: ethernet@e2800000 {
859 compatible = "microchip,sama7g5-gem";
860 reg = <0xe2800000 0x1000>;
861 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
862 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
863 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
864 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
865 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
866 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
867 clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
868 clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
869 assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
870 assigned-clock-rates = <125000000>;
871 status = "disabled";
872 };
873
874 gmac1: ethernet@e2804000 {
875 compatible = "microchip,sama7g5-emac";
876 reg = <0xe2804000 0x1000>;
877 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
878 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
879 clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
880 clock-names = "pclk", "hclk";
881 status = "disabled";
882 };
883
884 dma0: dma-controller@e2808000 {
885 compatible = "microchip,sama7g5-dma";
886 reg = <0xe2808000 0x1000>;
887 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
888 #dma-cells = <1>;
889 clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
890 clock-names = "dma_clk";
891 status = "disabled";
892 };
893
894 dma1: dma-controller@e280c000 {
895 compatible = "microchip,sama7g5-dma";
896 reg = <0xe280c000 0x1000>;
897 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
898 #dma-cells = <1>;
899 clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
900 clock-names = "dma_clk";
901 status = "disabled";
902 };
903
904 /* Place dma2 here despite it's address */
905 dma2: dma-controller@e1200000 {
906 compatible = "microchip,sama7g5-dma";
907 reg = <0xe1200000 0x1000>;
908 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
909 #dma-cells = <1>;
910 clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
911 clock-names = "dma_clk";
912 dma-requests = <0>;
913 status = "disabled";
914 };
915
916 tcb0: timer@e2814000 {
917 compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
918 #address-cells = <1>;
919 #size-cells = <0>;
920 reg = <0xe2814000 0x100>;
921 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
922 clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
923 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
924 };
925
926 flx8: flexcom@e2818000 {
927 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
928 reg = <0xe2818000 0x200>;
929 clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
930 #address-cells = <1>;
931 #size-cells = <1>;
932 ranges = <0x0 0xe2818000 0x800>;
933 status = "disabled";
934
935 i2c8: i2c@600 {
936 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
937 reg = <0x600 0x200>;
938 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
939 #address-cells = <1>;
940 #size-cells = <0>;
941 clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
942 atmel,fifo-size = <32>;
943 dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
944 <&dma0 AT91_XDMAC_DT_PERID(21)>;
945 dma-names = "tx", "rx";
946 status = "disabled";
947 };
948 };
949
950 flx9: flexcom@e281c000 {
951 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
952 reg = <0xe281c000 0x200>;
953 clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
954 #address-cells = <1>;
955 #size-cells = <1>;
956 ranges = <0x0 0xe281c000 0x800>;
957 status = "disabled";
958
959 i2c9: i2c@600 {
960 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
961 reg = <0x600 0x200>;
962 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
963 #address-cells = <1>;
964 #size-cells = <0>;
965 clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
966 atmel,fifo-size = <32>;
967 dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
968 <&dma0 AT91_XDMAC_DT_PERID(23)>;
969 dma-names = "tx", "rx";
970 status = "disabled";
971 };
972 };
973
974 flx10: flexcom@e2820000 {
975 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
976 reg = <0xe2820000 0x200>;
977 clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
978 #address-cells = <1>;
979 #size-cells = <1>;
980 ranges = <0x0 0xe2820000 0x800>;
981 status = "disabled";
982
983 i2c10: i2c@600 {
984 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
985 reg = <0x600 0x200>;
986 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
987 #address-cells = <1>;
988 #size-cells = <0>;
989 clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
990 atmel,fifo-size = <32>;
991 dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
992 <&dma0 AT91_XDMAC_DT_PERID(25)>;
993 dma-names = "tx", "rx";
994 status = "disabled";
995 };
996 };
997
998 flx11: flexcom@e2824000 {
999 compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
1000 reg = <0xe2824000 0x200>;
1001 clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
1002 #address-cells = <1>;
1003 #size-cells = <1>;
1004 ranges = <0x0 0xe2824000 0x800>;
1005 status = "disabled";
1006
1007 spi11: spi@400 {
1008 compatible = "atmel,at91rm9200-spi";
1009 reg = <0x400 0x200>;
1010 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1011 clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
1012 clock-names = "spi_clk";
1013 #address-cells = <1>;
1014 #size-cells = <0>;
1015 atmel,fifo-size = <32>;
1016 dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
1017 <&dma0 AT91_XDMAC_DT_PERID(27)>;
1018 dma-names = "tx", "rx";
1019 status = "disabled";
1020 };
1021 };
1022
1023 uddrc: uddrc@e3800000 {
1024 compatible = "microchip,sama7g5-uddrc";
1025 reg = <0xe3800000 0x4000>;
1026 };
1027
1028 ddr3phy: ddr3phy@e3804000 {
1029 compatible = "microchip,sama7g5-ddr3phy";
1030 reg = <0xe3804000 0x1000>;
1031 };
1032
1033 otpc: efuse@e8c00000 {
1034 compatible = "microchip,sama7g5-otpc", "syscon";
1035 reg = <0xe8c00000 0x100>;
1036 #address-cells = <1>;
1037 #size-cells = <1>;
1038
1039 temperature_calib: calib@1 {
1040 reg = <OTP_PKT(1) 76>;
1041 };
1042 };
1043
1044 gic: interrupt-controller@e8c11000 {
1045 compatible = "arm,cortex-a7-gic";
1046 #interrupt-cells = <3>;
1047 #address-cells = <0>;
1048 interrupt-controller;
1049 reg = <0xe8c11000 0x1000>,
1050 <0xe8c12000 0x2000>;
1051 };
1052 };
1053 };