| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board |
| 4 |
* |
| 5 |
* Copyright (c) 2017, Microchip Technology Inc. |
| 6 |
* 2017 Cristian Birsan <[email protected]> |
| 7 |
* 2017 Claudiu Beznea <[email protected]> |
| 8 |
*/ |
| 9 |
#include "sama5d2.dtsi" |
| 10 |
#include "sama5d2-pinfunc.h" |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Atmel SAMA5D27 SoM1"; |
| 15 |
compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
i2c0 = &i2c0; |
| 19 |
}; |
| 20 |
|
| 21 |
clocks { |
| 22 |
slow_xtal { |
| 23 |
clock-frequency = <32768>; |
| 24 |
}; |
| 25 |
|
| 26 |
main_xtal { |
| 27 |
clock-frequency = <24000000>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
ahb { |
| 32 |
sdmmc0: sdio-host@a0000000 { |
| 33 |
microchip,sdcal-inverted; |
| 34 |
}; |
| 35 |
|
| 36 |
apb { |
| 37 |
qspi1: spi@f0024000 { |
| 38 |
pinctrl-names = "default"; |
| 39 |
pinctrl-0 = <&pinctrl_qspi1_default>; |
| 40 |
|
| 41 |
flash@0 { |
| 42 |
#address-cells = <1>; |
| 43 |
#size-cells = <1>; |
| 44 |
compatible = "jedec,spi-nor"; |
| 45 |
reg = <0>; |
| 46 |
spi-max-frequency = <104000000>; |
| 47 |
spi-cs-setup-delay-ns = <7>; |
| 48 |
spi-tx-bus-width = <4>; |
| 49 |
spi-rx-bus-width = <4>; |
| 50 |
m25p,fast-read; |
| 51 |
|
| 52 |
at91bootstrap@0 { |
| 53 |
label = "at91bootstrap"; |
| 54 |
reg = <0x00000000 0x00040000>; |
| 55 |
}; |
| 56 |
|
| 57 |
bootloader@40000 { |
| 58 |
label = "bootloader"; |
| 59 |
reg = <0x00040000 0x000c0000>; |
| 60 |
}; |
| 61 |
|
| 62 |
bootloaderenvred@100000 { |
| 63 |
label = "bootloader env redundant"; |
| 64 |
reg = <0x00100000 0x00040000>; |
| 65 |
}; |
| 66 |
|
| 67 |
bootloaderenv@140000 { |
| 68 |
label = "bootloader env"; |
| 69 |
reg = <0x00140000 0x00040000>; |
| 70 |
}; |
| 71 |
|
| 72 |
dtb@180000 { |
| 73 |
label = "device tree"; |
| 74 |
reg = <0x00180000 0x00080000>; |
| 75 |
}; |
| 76 |
|
| 77 |
kernel@200000 { |
| 78 |
label = "kernel"; |
| 79 |
reg = <0x00200000 0x00600000>; |
| 80 |
}; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
macb0: ethernet@f8008000 { |
| 85 |
pinctrl-names = "default"; |
| 86 |
pinctrl-0 = <&pinctrl_macb0_default>; |
| 87 |
#address-cells = <1>; |
| 88 |
#size-cells = <0>; |
| 89 |
phy-mode = "rmii"; |
| 90 |
|
| 91 |
ethernet-phy@7 { |
| 92 |
reg = <0x7>; |
| 93 |
interrupt-parent = <&pioA>; |
| 94 |
interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; |
| 95 |
pinctrl-names = "default"; |
| 96 |
pinctrl-0 = <&pinctrl_macb0_phy_irq>; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
i2c0: i2c@f8028000 { |
| 101 |
dmas = <0>, <0>; |
| 102 |
pinctrl-names = "default", "gpio"; |
| 103 |
pinctrl-0 = <&pinctrl_i2c0_default>; |
| 104 |
pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| 105 |
sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; |
| 106 |
scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 107 |
status = "okay"; |
| 108 |
|
| 109 |
eeprom@50 { |
| 110 |
compatible = "atmel,24c02"; |
| 111 |
reg = <0x50>; |
| 112 |
pagesize = <8>; |
| 113 |
}; |
| 114 |
}; |
| 115 |
|
| 116 |
pinctrl@fc038000 { |
| 117 |
pinctrl_i2c0_default: i2c0_default { |
| 118 |
pinmux = <PIN_PD21__TWD0>, |
| 119 |
<PIN_PD22__TWCK0>; |
| 120 |
bias-disable; |
| 121 |
}; |
| 122 |
|
| 123 |
pinctrl_i2c0_gpio: i2c0_gpio { |
| 124 |
pinmux = <PIN_PD21__GPIO>, |
| 125 |
<PIN_PD22__GPIO>; |
| 126 |
bias-disable; |
| 127 |
}; |
| 128 |
|
| 129 |
pinctrl_qspi1_default: qspi1_default { |
| 130 |
sck_cs { |
| 131 |
pinmux = <PIN_PB5__QSPI1_SCK>, |
| 132 |
<PIN_PB6__QSPI1_CS>; |
| 133 |
bias-disable; |
| 134 |
}; |
| 135 |
|
| 136 |
data { |
| 137 |
pinmux = <PIN_PB7__QSPI1_IO0>, |
| 138 |
<PIN_PB8__QSPI1_IO1>, |
| 139 |
<PIN_PB9__QSPI1_IO2>, |
| 140 |
<PIN_PB10__QSPI1_IO3>; |
| 141 |
bias-pull-up; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
pinctrl_macb0_default: macb0_default { |
| 146 |
pinmux = <PIN_PD9__GTXCK>, |
| 147 |
<PIN_PD10__GTXEN>, |
| 148 |
<PIN_PD11__GRXDV>, |
| 149 |
<PIN_PD12__GRXER>, |
| 150 |
<PIN_PD13__GRX0>, |
| 151 |
<PIN_PD14__GRX1>, |
| 152 |
<PIN_PD15__GTX0>, |
| 153 |
<PIN_PD16__GTX1>, |
| 154 |
<PIN_PD17__GMDC>, |
| 155 |
<PIN_PD18__GMDIO>; |
| 156 |
bias-disable; |
| 157 |
}; |
| 158 |
|
| 159 |
pinctrl_macb0_phy_irq: macb0_phy_irq { |
| 160 |
pinmux = <PIN_PD31__GPIO>; |
| 161 |
bias-disable; |
| 162 |
}; |
| 163 |
}; |
| 164 |
}; |
| 165 |
}; |
| 166 |
}; |