| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Atmel, |
| 6 |
* 2014 Nicolas Ferre <[email protected]> |
| 7 |
*/ |
| 8 |
/dts-v1/; |
| 9 |
#include "sama5d36.dtsi" |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "SAMA5D3 Xplained"; |
| 14 |
compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; |
| 15 |
|
| 16 |
chosen { |
| 17 |
stdout-path = "serial0:115200n8"; |
| 18 |
}; |
| 19 |
|
| 20 |
memory@20000000 { |
| 21 |
reg = <0x20000000 0x10000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
clocks { |
| 25 |
slow_xtal { |
| 26 |
clock-frequency = <32768>; |
| 27 |
}; |
| 28 |
|
| 29 |
main_xtal { |
| 30 |
clock-frequency = <12000000>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
ahb { |
| 35 |
apb { |
| 36 |
mmc0: mmc@f0000000 { |
| 37 |
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; |
| 38 |
vmmc-supply = <&vcc_mmc0_reg>; |
| 39 |
vqmmc-supply = <&vcc_3v3_reg>; |
| 40 |
status = "okay"; |
| 41 |
slot@0 { |
| 42 |
reg = <0>; |
| 43 |
bus-width = <8>; |
| 44 |
cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
mmc1: mmc@f8000000 { |
| 49 |
vmmc-supply = <&vcc_3v3_reg>; |
| 50 |
vqmmc-supply = <&vcc_3v3_reg>; |
| 51 |
status = "disabled"; |
| 52 |
slot@0 { |
| 53 |
reg = <0>; |
| 54 |
bus-width = <4>; |
| 55 |
cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
spi0: spi@f0004000 { |
| 60 |
pinctrl-names = "default", "cs"; |
| 61 |
pinctrl-1 = <&pinctrl_spi0_cs>; |
| 62 |
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; |
| 63 |
status = "okay"; |
| 64 |
}; |
| 65 |
|
| 66 |
can0: can@f000c000 { |
| 67 |
status = "okay"; |
| 68 |
}; |
| 69 |
|
| 70 |
tcb0: timer@f0010000 { |
| 71 |
timer0: timer@0 { |
| 72 |
compatible = "atmel,tcb-timer"; |
| 73 |
reg = <0>; |
| 74 |
}; |
| 75 |
|
| 76 |
timer1: timer@1 { |
| 77 |
compatible = "atmel,tcb-timer"; |
| 78 |
reg = <1>; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
i2c0: i2c@f0014000 { |
| 83 |
pinctrl-0 = <&pinctrl_i2c0_pu>; |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
i2c1: i2c@f0018000 { |
| 88 |
status = "okay"; |
| 89 |
|
| 90 |
act8865: pmic@5b { |
| 91 |
compatible = "active-semi,act8865"; |
| 92 |
reg = <0x5b>; |
| 93 |
status = "disabled"; |
| 94 |
|
| 95 |
regulators { |
| 96 |
vcc_1v8_reg: DCDC_REG1 { |
| 97 |
regulator-name = "VCC_1V8"; |
| 98 |
regulator-min-microvolt = <1800000>; |
| 99 |
regulator-max-microvolt = <1800000>; |
| 100 |
regulator-always-on; |
| 101 |
}; |
| 102 |
|
| 103 |
vcc_1v2_reg: DCDC_REG2 { |
| 104 |
regulator-name = "VCC_1V2"; |
| 105 |
regulator-min-microvolt = <1200000>; |
| 106 |
regulator-max-microvolt = <1200000>; |
| 107 |
regulator-always-on; |
| 108 |
}; |
| 109 |
|
| 110 |
vcc_3v3_reg: DCDC_REG3 { |
| 111 |
regulator-name = "VCC_3V3"; |
| 112 |
regulator-min-microvolt = <3300000>; |
| 113 |
regulator-max-microvolt = <3300000>; |
| 114 |
regulator-always-on; |
| 115 |
}; |
| 116 |
|
| 117 |
vddfuse_reg: LDO_REG1 { |
| 118 |
regulator-name = "FUSE_2V5"; |
| 119 |
regulator-min-microvolt = <2500000>; |
| 120 |
regulator-max-microvolt = <2500000>; |
| 121 |
}; |
| 122 |
|
| 123 |
vddana_reg: LDO_REG2 { |
| 124 |
regulator-name = "VDDANA"; |
| 125 |
regulator-min-microvolt = <3300000>; |
| 126 |
regulator-max-microvolt = <3300000>; |
| 127 |
regulator-always-on; |
| 128 |
}; |
| 129 |
}; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
macb0: ethernet@f0028000 { |
| 134 |
phy-mode = "rgmii-rxid"; |
| 135 |
#address-cells = <1>; |
| 136 |
#size-cells = <0>; |
| 137 |
status = "okay"; |
| 138 |
|
| 139 |
ethernet-phy@7 { |
| 140 |
reg = <0x7>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
pwm0: pwm@f002c000 { |
| 145 |
pinctrl-names = "default"; |
| 146 |
pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>; |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
usart0: serial@f001c000 { |
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
usart1: serial@f0020000 { |
| 155 |
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
uart0: serial@f0024000 { |
| 160 |
status = "okay"; |
| 161 |
}; |
| 162 |
|
| 163 |
mmc1: mmc@f8000000 { |
| 164 |
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; |
| 165 |
status = "okay"; |
| 166 |
slot@0 { |
| 167 |
reg = <0>; |
| 168 |
bus-width = <4>; |
| 169 |
cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
spi1: spi@f8008000 { |
| 174 |
pinctrl-names = "default", "cs"; |
| 175 |
pinctrl-1 = <&pinctrl_spi1_cs>; |
| 176 |
cs-gpios = <&pioC 25 0>; |
| 177 |
status = "okay"; |
| 178 |
}; |
| 179 |
|
| 180 |
adc0: adc@f8018000 { |
| 181 |
atmel,adc-vref = <3300>; |
| 182 |
atmel,adc-channels-used = <0xfe>; |
| 183 |
pinctrl-0 = < |
| 184 |
&pinctrl_adc0_adtrg |
| 185 |
&pinctrl_adc0_ad1 |
| 186 |
&pinctrl_adc0_ad2 |
| 187 |
&pinctrl_adc0_ad3 |
| 188 |
&pinctrl_adc0_ad4 |
| 189 |
&pinctrl_adc0_ad5 |
| 190 |
&pinctrl_adc0_ad6 |
| 191 |
&pinctrl_adc0_ad7 |
| 192 |
>; |
| 193 |
status = "okay"; |
| 194 |
}; |
| 195 |
|
| 196 |
i2c2: i2c@f801c000 { |
| 197 |
dmas = <0>, <0>; /* Do not use DMA for i2c2 */ |
| 198 |
pinctrl-0 = <&pinctrl_i2c2_pu>; |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
macb1: ethernet@f802c000 { |
| 203 |
phy-mode = "rmii"; |
| 204 |
#address-cells = <1>; |
| 205 |
#size-cells = <0>; |
| 206 |
status = "okay"; |
| 207 |
|
| 208 |
ethernet-phy@1 { |
| 209 |
reg = <0x1>; |
| 210 |
}; |
| 211 |
}; |
| 212 |
|
| 213 |
dbgu: serial@ffffee00 { |
| 214 |
status = "okay"; |
| 215 |
}; |
| 216 |
|
| 217 |
pinctrl@fffff200 { |
| 218 |
board { |
| 219 |
pinctrl_i2c0_pu: i2c0_pu { |
| 220 |
atmel,pins = |
| 221 |
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 222 |
<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; |
| 223 |
}; |
| 224 |
|
| 225 |
pinctrl_i2c2_pu: i2c2_pu { |
| 226 |
atmel,pins = |
| 227 |
<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, |
| 228 |
<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; |
| 229 |
}; |
| 230 |
|
| 231 |
pinctrl_key_gpio: key_gpio_0 { |
| 232 |
atmel,pins = |
| 233 |
<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 234 |
}; |
| 235 |
|
| 236 |
pinctrl_mmc0_cd: mmc0_cd { |
| 237 |
atmel,pins = |
| 238 |
<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 239 |
}; |
| 240 |
|
| 241 |
pinctrl_mmc1_cd: mmc1_cd { |
| 242 |
atmel,pins = |
| 243 |
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 244 |
}; |
| 245 |
|
| 246 |
pinctrl_usba_vbus: usba_vbus { |
| 247 |
atmel,pins = |
| 248 |
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ |
| 249 |
}; |
| 250 |
pinctrl_usb_default: usb_default { |
| 251 |
atmel,pins = |
| 252 |
<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 253 |
AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 254 |
}; |
| 255 |
|
| 256 |
pinctrl_gpio_leds: gpio_leds_default { |
| 257 |
atmel,pins = |
| 258 |
<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 259 |
AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 260 |
}; |
| 261 |
|
| 262 |
pinctrl_spi0_cs: spi0_cs_default { |
| 263 |
atmel,pins = |
| 264 |
<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 265 |
AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 266 |
}; |
| 267 |
|
| 268 |
pinctrl_spi1_cs: spi1_cs_default { |
| 269 |
atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 270 |
}; |
| 271 |
|
| 272 |
pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default { |
| 273 |
atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
usb0: gadget@500000 { |
| 280 |
atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ |
| 281 |
pinctrl-names = "default"; |
| 282 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 283 |
status = "okay"; |
| 284 |
}; |
| 285 |
|
| 286 |
usb1: usb@600000 { |
| 287 |
num-ports = <3>; |
| 288 |
atmel,vbus-gpio = <0 |
| 289 |
&pioE 3 GPIO_ACTIVE_LOW |
| 290 |
&pioE 4 GPIO_ACTIVE_LOW |
| 291 |
>; |
| 292 |
pinctrl-names = "default"; |
| 293 |
pinctrl-0 = <&pinctrl_usb_default>; |
| 294 |
status = "okay"; |
| 295 |
}; |
| 296 |
|
| 297 |
usb2: usb@700000 { |
| 298 |
status = "okay"; |
| 299 |
}; |
| 300 |
|
| 301 |
ebi: ebi@10000000 { |
| 302 |
pinctrl-0 = <&pinctrl_ebi_nand_addr>; |
| 303 |
pinctrl-names = "default"; |
| 304 |
status = "okay"; |
| 305 |
|
| 306 |
nand_controller: nand-controller { |
| 307 |
status = "okay"; |
| 308 |
|
| 309 |
nand@3 { |
| 310 |
reg = <0x3 0x0 0x2>; |
| 311 |
atmel,rb = <0>; |
| 312 |
nand-bus-width = <8>; |
| 313 |
nand-ecc-mode = "hw"; |
| 314 |
nand-ecc-strength = <4>; |
| 315 |
nand-ecc-step-size = <512>; |
| 316 |
nand-on-flash-bbt; |
| 317 |
label = "atmel_nand"; |
| 318 |
|
| 319 |
partitions { |
| 320 |
compatible = "fixed-partitions"; |
| 321 |
#address-cells = <1>; |
| 322 |
#size-cells = <1>; |
| 323 |
|
| 324 |
at91bootstrap@0 { |
| 325 |
label = "at91bootstrap"; |
| 326 |
reg = <0x0 0x40000>; |
| 327 |
}; |
| 328 |
|
| 329 |
bootloader@40000 { |
| 330 |
label = "bootloader"; |
| 331 |
reg = <0x40000 0xc0000>; |
| 332 |
}; |
| 333 |
|
| 334 |
bootloaderenvred@100000 { |
| 335 |
label = "bootloader env redundant"; |
| 336 |
reg = <0x100000 0x40000>; |
| 337 |
}; |
| 338 |
|
| 339 |
bootloaderenv@140000 { |
| 340 |
label = "bootloader env"; |
| 341 |
reg = <0x140000 0x40000>; |
| 342 |
}; |
| 343 |
|
| 344 |
dtb@180000 { |
| 345 |
label = "device tree"; |
| 346 |
reg = <0x180000 0x80000>; |
| 347 |
}; |
| 348 |
|
| 349 |
kernel@200000 { |
| 350 |
label = "kernel"; |
| 351 |
reg = <0x200000 0x600000>; |
| 352 |
}; |
| 353 |
|
| 354 |
rootfs@800000 { |
| 355 |
label = "rootfs"; |
| 356 |
reg = <0x800000 0x0f800000>; |
| 357 |
}; |
| 358 |
}; |
| 359 |
}; |
| 360 |
}; |
| 361 |
}; |
| 362 |
}; |
| 363 |
|
| 364 |
vcc_mmc0_reg: fixedregulator_mmc0 { |
| 365 |
compatible = "regulator-fixed"; |
| 366 |
pinctrl-names = "default"; |
| 367 |
pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>; |
| 368 |
gpio = <&pioE 2 GPIO_ACTIVE_LOW>; |
| 369 |
regulator-name = "mmc0-card-supply"; |
| 370 |
regulator-min-microvolt = <3300000>; |
| 371 |
regulator-max-microvolt = <3300000>; |
| 372 |
regulator-always-on; |
| 373 |
}; |
| 374 |
|
| 375 |
gpio-keys { |
| 376 |
compatible = "gpio-keys"; |
| 377 |
|
| 378 |
pinctrl-names = "default"; |
| 379 |
pinctrl-0 = <&pinctrl_key_gpio>; |
| 380 |
|
| 381 |
button { |
| 382 |
label = "PB_USER"; |
| 383 |
gpios = <&pioE 29 GPIO_ACTIVE_LOW>; |
| 384 |
linux,code = <KEY_PROG1>; |
| 385 |
wakeup-source; |
| 386 |
}; |
| 387 |
}; |
| 388 |
|
| 389 |
leds { |
| 390 |
compatible = "gpio-leds"; |
| 391 |
pinctrl-names = "default"; |
| 392 |
pinctrl-0 = <&pinctrl_gpio_leds>; |
| 393 |
status = "okay"; |
| 394 |
|
| 395 |
led-d2 { |
| 396 |
label = "d2"; |
| 397 |
gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ |
| 398 |
linux,default-trigger = "heartbeat"; |
| 399 |
}; |
| 400 |
|
| 401 |
led-d3 { |
| 402 |
label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */ |
| 403 |
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; |
| 404 |
}; |
| 405 |
}; |
| 406 |
}; |