| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree file for VInCo platform |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Atmel, |
| 6 |
* 2014 Nicolas Ferre <[email protected]> |
| 7 |
* 2015 Gregory CLEMENT <[email protected]> |
| 8 |
*/ |
| 9 |
/dts-v1/; |
| 10 |
#include "sama5d4.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "L+G VInCo platform"; |
| 14 |
compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5"; |
| 15 |
|
| 16 |
chosen { |
| 17 |
stdout-path = "serial0:115200n8"; |
| 18 |
}; |
| 19 |
|
| 20 |
memory@20000000 { |
| 21 |
reg = <0x20000000 0x4000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
clocks { |
| 25 |
slow_xtal { |
| 26 |
clock-frequency = <32768>; |
| 27 |
}; |
| 28 |
|
| 29 |
main_xtal { |
| 30 |
clock-frequency = <12000000>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
ahb { |
| 35 |
apb { |
| 36 |
|
| 37 |
adc0: adc@fc034000 { |
| 38 |
status = "okay"; /* Enable ADC IIO support */ |
| 39 |
}; |
| 40 |
|
| 41 |
mmc0: mmc@f8000000 { |
| 42 |
pinctrl-names = "default"; |
| 43 |
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 |
| 44 |
&pinctrl_mmc0_dat1_3 |
| 45 |
&pinctrl_mmc0_dat4_7>; |
| 46 |
vqmmc-supply = <&vcc_3v3_reg>; |
| 47 |
vmmc-supply = <&vcc_3v3_reg>; |
| 48 |
no-1-8-v; |
| 49 |
status = "okay"; |
| 50 |
slot@0 { |
| 51 |
reg = <0>; |
| 52 |
bus-width = <8>; |
| 53 |
non-removable; |
| 54 |
broken-cd; |
| 55 |
status = "okay"; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
spi0: spi@f8010000 { |
| 60 |
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; |
| 61 |
status = "okay"; |
| 62 |
flash@0 { |
| 63 |
compatible = "n25q32b", "jedec,spi-nor"; |
| 64 |
spi-max-frequency = <50000000>; |
| 65 |
reg = <0>; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
i2c0: i2c@f8014000 { |
| 70 |
status = "okay"; |
| 71 |
}; |
| 72 |
|
| 73 |
i2c1: i2c@f8018000 { |
| 74 |
status = "okay"; |
| 75 |
/* kerkey security module */ |
| 76 |
}; |
| 77 |
|
| 78 |
macb0: ethernet@f8020000 { |
| 79 |
phy-mode = "rmii"; |
| 80 |
status = "okay"; |
| 81 |
|
| 82 |
ethernet-phy@1 { |
| 83 |
reg = <0x1>; |
| 84 |
reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>; |
| 85 |
interrupt-parent = <&pioB>; |
| 86 |
interrupts = <15 IRQ_TYPE_EDGE_FALLING>; |
| 87 |
}; |
| 88 |
|
| 89 |
}; |
| 90 |
|
| 91 |
i2c2: i2c@f8024000 { |
| 92 |
status = "okay"; |
| 93 |
|
| 94 |
rtc1: rtc@32 { |
| 95 |
compatible = "epson,rx8900"; |
| 96 |
reg = <0x32>; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
usart2: serial@fc008000 { |
| 101 |
/* MBUS */ |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
usart3: serial@fc00c000 { |
| 106 |
/* debug */ |
| 107 |
status = "okay"; |
| 108 |
}; |
| 109 |
|
| 110 |
usart4: serial@fc010000 { |
| 111 |
/* LMN */ |
| 112 |
pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>; |
| 113 |
linux,rs485-enabled-at-boot-time; |
| 114 |
status = "okay"; |
| 115 |
}; |
| 116 |
|
| 117 |
tcb2: timer@fc024000 { |
| 118 |
timer@0 { |
| 119 |
compatible = "atmel,tcb-timer"; |
| 120 |
reg = <0>; |
| 121 |
}; |
| 122 |
|
| 123 |
timer@1 { |
| 124 |
compatible = "atmel,tcb-timer"; |
| 125 |
reg = <1>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
macb1: ethernet@fc028000 { |
| 130 |
phy-mode = "rmii"; |
| 131 |
status = "okay"; |
| 132 |
#address-cells = <1>; |
| 133 |
#size-cells = <0>; |
| 134 |
status = "okay"; |
| 135 |
|
| 136 |
ethernet-phy@1 { |
| 137 |
reg = <0x1>; |
| 138 |
interrupt-parent = <&pioB>; |
| 139 |
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 140 |
reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
watchdog@fc068640 { |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
pinctrl@fc06a000 { |
| 149 |
board { |
| 150 |
pinctrl_usba_vbus: usba_vbus { |
| 151 |
atmel,pins = |
| 152 |
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 153 |
}; |
| 154 |
}; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
usb0: gadget@400000 { |
| 159 |
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; |
| 160 |
pinctrl-names = "default"; |
| 161 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 162 |
status = "disabled"; |
| 163 |
}; |
| 164 |
|
| 165 |
usb1: usb@500000 { |
| 166 |
num-ports = <3>; |
| 167 |
atmel,vbus-gpio = <0 |
| 168 |
&pioE 11 GPIO_ACTIVE_LOW |
| 169 |
&pioE 12 GPIO_ACTIVE_LOW |
| 170 |
>; |
| 171 |
status = "disabled"; |
| 172 |
}; |
| 173 |
|
| 174 |
usb2: usb@600000 { |
| 175 |
/* 4G Modem */ |
| 176 |
status = "okay"; |
| 177 |
}; |
| 178 |
|
| 179 |
}; |
| 180 |
|
| 181 |
leds { |
| 182 |
compatible = "gpio-leds"; |
| 183 |
status = "okay"; |
| 184 |
|
| 185 |
led_err { |
| 186 |
label = "err"; |
| 187 |
gpios = <&pioA 7 GPIO_ACTIVE_LOW>; |
| 188 |
default-state = "off"; |
| 189 |
}; |
| 190 |
|
| 191 |
led_rssi { |
| 192 |
label = "rssi"; |
| 193 |
gpios = <&pioA 9 GPIO_ACTIVE_LOW>; |
| 194 |
default-state = "off"; |
| 195 |
}; |
| 196 |
|
| 197 |
led_tls { |
| 198 |
label = "tls"; |
| 199 |
gpios = <&pioA 24 GPIO_ACTIVE_LOW>; |
| 200 |
default-state = "off"; |
| 201 |
}; |
| 202 |
|
| 203 |
led_lmc { |
| 204 |
label = "lmc"; |
| 205 |
gpios = <&pioA 25 GPIO_ACTIVE_LOW>; |
| 206 |
default-state = "off"; |
| 207 |
}; |
| 208 |
|
| 209 |
led_wmt { |
| 210 |
label = "wmt"; |
| 211 |
gpios = <&pioA 29 GPIO_ACTIVE_LOW>; |
| 212 |
default-state = "off"; |
| 213 |
}; |
| 214 |
|
| 215 |
led_pwr { |
| 216 |
label = "pwr"; |
| 217 |
gpios = <&pioA 26 GPIO_ACTIVE_LOW>; |
| 218 |
default-state = "on"; |
| 219 |
}; |
| 220 |
|
| 221 |
}; |
| 222 |
|
| 223 |
vcc_3v3_reg: fixedregulator_3v3 { |
| 224 |
compatible = "regulator-fixed"; |
| 225 |
regulator-name = "VCC 3V3"; |
| 226 |
regulator-min-microvolt = <3300000>; |
| 227 |
regulator-max-microvolt = <3300000>; |
| 228 |
regulator-boot-on; |
| 229 |
regulator-always-on; |
| 230 |
}; |
| 231 |
}; |