| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Common part of the device tree for the Kontron KSwitch D10 MMT |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "lan966x.dtsi" |
| 8 |
#include "dt-bindings/phy/phy-lan966x-serdes.h" |
| 9 |
|
| 10 |
/ { |
| 11 |
aliases { |
| 12 |
serial0 = &usart0; |
| 13 |
}; |
| 14 |
|
| 15 |
chosen { |
| 16 |
stdout-path = "serial0:115200n8"; |
| 17 |
}; |
| 18 |
|
| 19 |
gpio-restart { |
| 20 |
compatible = "gpio-restart"; |
| 21 |
pinctrl-0 = <&reset_pins>; |
| 22 |
pinctrl-names = "default"; |
| 23 |
gpios = <&gpio 56 GPIO_ACTIVE_LOW>; |
| 24 |
priority = <200>; |
| 25 |
}; |
| 26 |
}; |
| 27 |
|
| 28 |
&flx0 { |
| 29 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; |
| 30 |
status = "okay"; |
| 31 |
|
| 32 |
usart0: serial@200 { |
| 33 |
pinctrl-0 = <&usart0_pins>; |
| 34 |
pinctrl-names = "default"; |
| 35 |
status = "okay"; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
&flx3 { |
| 40 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; |
| 41 |
status = "okay"; |
| 42 |
|
| 43 |
spi3: spi@400 { |
| 44 |
pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>; |
| 45 |
pinctrl-names = "default"; |
| 46 |
status = "okay"; |
| 47 |
cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
&gpio { |
| 52 |
pinctrl-0 = <&phy_int_pins>; |
| 53 |
pinctrl-names = "default"; |
| 54 |
|
| 55 |
fc3_b_pins: fc3-b-pins { |
| 56 |
/* SCK, MISO, MOSI */ |
| 57 |
pins = "GPIO_51", "GPIO_52", "GPIO_53"; |
| 58 |
function = "fc3_b"; |
| 59 |
}; |
| 60 |
|
| 61 |
miim_c_pins: miim-c-pins { |
| 62 |
/* MDC, MDIO */ |
| 63 |
pins = "GPIO_59", "GPIO_60"; |
| 64 |
function = "miim_c"; |
| 65 |
}; |
| 66 |
|
| 67 |
phy_int_pins: phy-int-pins { |
| 68 |
/* PHY_INT# */ |
| 69 |
pins = "GPIO_24"; |
| 70 |
function = "gpio"; |
| 71 |
}; |
| 72 |
|
| 73 |
reset_pins: reset-pins { |
| 74 |
/* SYS_RST# */ |
| 75 |
pins = "GPIO_56"; |
| 76 |
function = "gpio"; |
| 77 |
}; |
| 78 |
|
| 79 |
sgpio_a_pins: sgpio-a-pins { |
| 80 |
/* SCK, D0, D1 */ |
| 81 |
pins = "GPIO_32", "GPIO_33", "GPIO_34"; |
| 82 |
function = "sgpio_a"; |
| 83 |
}; |
| 84 |
|
| 85 |
sgpio_b_pins: sgpio-b-pins { |
| 86 |
/* LD */ |
| 87 |
pins = "GPIO_64"; |
| 88 |
function = "sgpio_b"; |
| 89 |
}; |
| 90 |
|
| 91 |
spi3_cs_pins: spi3-cs-pins { |
| 92 |
/* CS# */ |
| 93 |
pins = "GPIO_46"; |
| 94 |
function = "gpio"; |
| 95 |
}; |
| 96 |
|
| 97 |
usart0_pins: usart0-pins { |
| 98 |
/* RXD, TXD */ |
| 99 |
pins = "GPIO_25", "GPIO_26"; |
| 100 |
function = "fc0_b"; |
| 101 |
}; |
| 102 |
|
| 103 |
usbs_a_pins: usbs-a-pins { |
| 104 |
/* VBUS_DET */ |
| 105 |
pins = "GPIO_66"; |
| 106 |
function = "gpio"; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
&mdio0 { |
| 111 |
pinctrl-0 = <&miim_c_pins>; |
| 112 |
pinctrl-names = "default"; |
| 113 |
reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>; |
| 114 |
clock-frequency = <2500000>; |
| 115 |
status = "okay"; |
| 116 |
|
| 117 |
phy4: ethernet-phy@5 { |
| 118 |
reg = <5>; |
| 119 |
interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>; |
| 120 |
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; |
| 121 |
}; |
| 122 |
|
| 123 |
phy5: ethernet-phy@6 { |
| 124 |
reg = <6>; |
| 125 |
interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>; |
| 126 |
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; |
| 127 |
}; |
| 128 |
|
| 129 |
phy6: ethernet-phy@7 { |
| 130 |
reg = <7>; |
| 131 |
interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>; |
| 132 |
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; |
| 133 |
}; |
| 134 |
|
| 135 |
phy7: ethernet-phy@8 { |
| 136 |
reg = <8>; |
| 137 |
interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>; |
| 138 |
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
&mdio1 { |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&phy0 { |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&phy1 { |
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
&port0 { |
| 155 |
phys = <&serdes 0 CU(0)>; |
| 156 |
phy-handle = <&phy0>; |
| 157 |
phy-mode = "gmii"; |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
&port1 { |
| 162 |
phys = <&serdes 1 CU(1)>; |
| 163 |
phy-handle = <&phy1>; |
| 164 |
phy-mode = "gmii"; |
| 165 |
status = "okay"; |
| 166 |
}; |
| 167 |
|
| 168 |
&port4 { |
| 169 |
phys = <&serdes 4 SERDES6G(2)>; |
| 170 |
phy-handle = <&phy4>; |
| 171 |
phy-mode = "qsgmii"; |
| 172 |
status = "okay"; |
| 173 |
}; |
| 174 |
|
| 175 |
&port5 { |
| 176 |
phys = <&serdes 5 SERDES6G(2)>; |
| 177 |
phy-handle = <&phy5>; |
| 178 |
phy-mode = "qsgmii"; |
| 179 |
status = "okay"; |
| 180 |
}; |
| 181 |
|
| 182 |
&port6 { |
| 183 |
phys = <&serdes 6 SERDES6G(2)>; |
| 184 |
phy-handle = <&phy6>; |
| 185 |
phy-mode = "qsgmii"; |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&port7 { |
| 190 |
phys = <&serdes 7 SERDES6G(2)>; |
| 191 |
phy-handle = <&phy7>; |
| 192 |
phy-mode = "qsgmii"; |
| 193 |
status = "okay"; |
| 194 |
}; |
| 195 |
|
| 196 |
&serdes { |
| 197 |
status = "okay"; |
| 198 |
}; |
| 199 |
|
| 200 |
&sgpio { |
| 201 |
pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>; |
| 202 |
pinctrl-names = "default"; |
| 203 |
bus-frequency = <8000000>; |
| 204 |
/* arbitrary range because all GPIOs are in software mode */ |
| 205 |
microchip,sgpio-port-ranges = <0 11>; |
| 206 |
status = "okay"; |
| 207 |
|
| 208 |
sgpio_in: gpio@0 { |
| 209 |
ngpios = <128>; |
| 210 |
}; |
| 211 |
|
| 212 |
sgpio_out: gpio@1 { |
| 213 |
ngpios = <128>; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
&switch { |
| 218 |
status = "okay"; |
| 219 |
}; |
| 220 |
|
| 221 |
&udc { |
| 222 |
pinctrl-0 = <&usbs_a_pins>; |
| 223 |
pinctrl-names = "default"; |
| 224 |
atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>; |
| 225 |
status = "okay"; |
| 226 |
}; |
| 227 |
|
| 228 |
&watchdog { |
| 229 |
status = "okay"; |
| 230 |
}; |