| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* at91-som60.dtsi - Device Tree file for the SOM60 module |
| 4 |
* |
| 5 |
* Copyright (C) 2018 Laird, |
| 6 |
* 2018 Ben Whitten <[email protected]> |
| 7 |
* |
| 8 |
*/ |
| 9 |
#include "sama5d36.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Laird SOM60"; |
| 13 |
compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; |
| 14 |
|
| 15 |
chosen { |
| 16 |
stdout-path = &dbgu; |
| 17 |
}; |
| 18 |
|
| 19 |
memory@20000000 { |
| 20 |
reg = <0x20000000 0x8000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
clocks { |
| 24 |
slow_xtal { |
| 25 |
clock-frequency = <32768>; |
| 26 |
}; |
| 27 |
|
| 28 |
main_xtal { |
| 29 |
clock-frequency = <12000000>; |
| 30 |
}; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
&pinctrl { |
| 35 |
board { |
| 36 |
pinctrl_mmc0_cd: mmc0_cd { |
| 37 |
atmel,pins = |
| 38 |
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 39 |
}; |
| 40 |
|
| 41 |
pinctrl_mmc0_en: mmc0_en { |
| 42 |
atmel,pins = |
| 43 |
<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 44 |
}; |
| 45 |
|
| 46 |
pinctrl_nand0_wp: nand0_wp { |
| 47 |
atmel,pins = |
| 48 |
<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; |
| 49 |
}; |
| 50 |
|
| 51 |
pinctrl_usb_vbus: usb_vbus { |
| 52 |
atmel,pins = |
| 53 |
<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 54 |
/* Conflicts with USART2_SCK */ |
| 55 |
}; |
| 56 |
|
| 57 |
pinctrl_usart2_sck: usart2_sck { |
| 58 |
atmel,pins = |
| 59 |
<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 60 |
/* Conflicts with USB_VBUS */ |
| 61 |
}; |
| 62 |
|
| 63 |
pinctrl_usb_oc: usb_oc { |
| 64 |
atmel,pins = |
| 65 |
<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 66 |
/* Conflicts with USART3_SCK */ |
| 67 |
}; |
| 68 |
|
| 69 |
pinctrl_usart3_sck: usart3_sck { |
| 70 |
atmel,pins = |
| 71 |
<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 72 |
/* Conflicts with USB_OC */ |
| 73 |
}; |
| 74 |
|
| 75 |
pinctrl_usba_vbus: usba_vbus { |
| 76 |
atmel,pins = |
| 77 |
<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 78 |
}; |
| 79 |
|
| 80 |
pinctrl_geth_int: geth_int { |
| 81 |
atmel,pins = |
| 82 |
<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 83 |
/* Conflicts with USART1_SCK */ |
| 84 |
}; |
| 85 |
|
| 86 |
pinctrl_usart1_sck: usart1_sck { |
| 87 |
atmel,pins = |
| 88 |
<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 89 |
/* Conflicts with GETH_INT */ |
| 90 |
}; |
| 91 |
|
| 92 |
pinctrl_eth_int: eth_int { |
| 93 |
atmel,pins = |
| 94 |
<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 95 |
}; |
| 96 |
|
| 97 |
pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { |
| 98 |
atmel,pins = |
| 99 |
<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
&mmc0 { |
| 105 |
slot@0 { |
| 106 |
reg = <0>; |
| 107 |
bus-width = <8>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
&mmc1 { |
| 112 |
status = "okay"; |
| 113 |
slot@0 { |
| 114 |
reg = <0>; |
| 115 |
bus-width = <4>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
&spi0 { |
| 120 |
cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; |
| 121 |
}; |
| 122 |
|
| 123 |
&usart0 { |
| 124 |
atmel,use-dma-rx; |
| 125 |
atmel,use-dma-tx; |
| 126 |
status = "okay"; |
| 127 |
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; |
| 128 |
}; |
| 129 |
|
| 130 |
&usart1 { |
| 131 |
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; |
| 132 |
}; |
| 133 |
|
| 134 |
&usart2 { |
| 135 |
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>; |
| 136 |
}; |
| 137 |
|
| 138 |
&usart3 { |
| 139 |
pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; |
| 140 |
}; |
| 141 |
|
| 142 |
&adc0 { |
| 143 |
pinctrl-0 = < |
| 144 |
&pinctrl_adc0_adtrg |
| 145 |
&pinctrl_adc0_ad0 |
| 146 |
&pinctrl_adc0_ad1 |
| 147 |
&pinctrl_adc0_ad2 |
| 148 |
&pinctrl_adc0_ad3 |
| 149 |
&pinctrl_adc0_ad4 |
| 150 |
&pinctrl_adc0_ad5 |
| 151 |
>; |
| 152 |
}; |
| 153 |
|
| 154 |
&macb0 { |
| 155 |
phy-mode = "rgmii"; |
| 156 |
}; |
| 157 |
|
| 158 |
&macb1 { |
| 159 |
phy-mode = "rmii"; |
| 160 |
}; |
| 161 |
|
| 162 |
&ebi { |
| 163 |
pinctrl-0 = <&pinctrl_ebi_nand_addr>; |
| 164 |
pinctrl-names = "default"; |
| 165 |
status = "okay"; |
| 166 |
}; |
| 167 |
|
| 168 |
&nand_controller { |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
nand: nand@3 { |
| 172 |
reg = <0x3 0x0 0x2>; |
| 173 |
atmel,rb = <0>; |
| 174 |
nand-bus-width = <8>; |
| 175 |
nand-ecc-mode = "hw"; |
| 176 |
nand-ecc-strength = <8>; |
| 177 |
nand-ecc-step-size = <512>; |
| 178 |
nand-on-flash-bbt; |
| 179 |
label = "atmel_nand"; |
| 180 |
|
| 181 |
partitions { |
| 182 |
compatible = "fixed-partitions"; |
| 183 |
#address-cells = <1>; |
| 184 |
#size-cells = <1>; |
| 185 |
|
| 186 |
ubootspl@0 { |
| 187 |
label = "u-boot-spl"; |
| 188 |
reg = <0x0 0x20000>; |
| 189 |
}; |
| 190 |
|
| 191 |
uboot@20000 { |
| 192 |
label = "u-boot"; |
| 193 |
reg = <0x20000 0x80000>; |
| 194 |
}; |
| 195 |
|
| 196 |
ubootenv@a0000 { |
| 197 |
label = "u-boot-env"; |
| 198 |
reg = <0xa0000 0x20000>; |
| 199 |
}; |
| 200 |
|
| 201 |
ubootenv@c0000 { |
| 202 |
label = "u-boot-env"; |
| 203 |
reg = <0xc0000 0x20000>; |
| 204 |
}; |
| 205 |
|
| 206 |
ubi@e0000 { |
| 207 |
label = "ubi"; |
| 208 |
reg = <0xe0000 0xfe00000>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
&usb0 { |
| 215 |
pinctrl-names = "default"; |
| 216 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 217 |
atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>; |
| 218 |
}; |
| 219 |
|
| 220 |
&usb1 { |
| 221 |
pinctrl-names = "default"; |
| 222 |
pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>; |
| 223 |
num-ports = <3>; |
| 224 |
atmel,vbus-gpio = <0 |
| 225 |
&pioE 20 GPIO_ACTIVE_HIGH |
| 226 |
0>; |
| 227 |
atmel,oc-gpio = <0 |
| 228 |
&pioE 15 GPIO_ACTIVE_LOW |
| 229 |
0>; |
| 230 |
}; |