| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* lan966x-pcb8385.dts - Device Tree file for PCB8385 |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "lan966x.dtsi" |
| 8 |
#include "dt-bindings/phy/phy-lan966x-serdes.h" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Microchip EVB - LAN9668"; |
| 12 |
compatible = "microchip,lan9668-pcb8385", "microchip,lan9668", "microchip,lan966"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
serial0 = &usart3; |
| 16 |
}; |
| 17 |
|
| 18 |
chosen { |
| 19 |
stdout-path = "serial0:115200n8"; |
| 20 |
}; |
| 21 |
|
| 22 |
gpio-restart { |
| 23 |
compatible = "gpio-restart"; |
| 24 |
gpios = <&gpio 59 GPIO_ACTIVE_LOW>; |
| 25 |
open-source; |
| 26 |
priority = <200>; |
| 27 |
}; |
| 28 |
|
| 29 |
leds { |
| 30 |
compatible = "gpio-leds"; |
| 31 |
|
| 32 |
led-p1-green { |
| 33 |
label = "cu0:green"; |
| 34 |
gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>; |
| 35 |
default-state = "off"; |
| 36 |
}; |
| 37 |
|
| 38 |
led-p1-yellow { |
| 39 |
label = "cu0:yellow"; |
| 40 |
gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>; |
| 41 |
default-state = "off"; |
| 42 |
}; |
| 43 |
|
| 44 |
led-p2-green { |
| 45 |
label = "cu1:green"; |
| 46 |
gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; |
| 47 |
default-state = "off"; |
| 48 |
}; |
| 49 |
|
| 50 |
led-p2-yellow { |
| 51 |
label = "cu1:yellow"; |
| 52 |
gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; |
| 53 |
default-state = "off"; |
| 54 |
}; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
&aes { |
| 59 |
status = "reserved"; /* Reserved by secure OS */ |
| 60 |
}; |
| 61 |
|
| 62 |
&flx0 { |
| 63 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; |
| 64 |
status = "okay"; |
| 65 |
}; |
| 66 |
|
| 67 |
&flx3 { |
| 68 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
&gpio { |
| 73 |
fc0_b_pins: fc0-b-pins { |
| 74 |
/* SCL, SDA */ |
| 75 |
pins = "GPIO_25", "GPIO_26"; |
| 76 |
function = "fc0_b"; |
| 77 |
}; |
| 78 |
|
| 79 |
fc3_b_pins: fc3-b-pins { |
| 80 |
/* RX, TX */ |
| 81 |
pins = "GPIO_52", "GPIO_53"; |
| 82 |
function = "fc3_b"; |
| 83 |
}; |
| 84 |
|
| 85 |
sgpio_a_pins: sgpio-a-pins { |
| 86 |
/* SCK, D0, D1, LD */ |
| 87 |
pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; |
| 88 |
function = "sgpio_a"; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
&i2c0 { |
| 93 |
pinctrl-0 = <&fc0_b_pins>; |
| 94 |
pinctrl-names = "default"; |
| 95 |
dmas = <0>, <0>; |
| 96 |
i2c-analog-filter; |
| 97 |
i2c-digital-filter; |
| 98 |
i2c-digital-filter-width-ns = <35>; |
| 99 |
i2c-sda-hold-time-ns = <1500>; |
| 100 |
status = "okay"; |
| 101 |
|
| 102 |
eeprom@54 { |
| 103 |
compatible = "atmel,24c01"; |
| 104 |
reg = <0x54>; |
| 105 |
}; |
| 106 |
|
| 107 |
eeprom@55 { |
| 108 |
compatible = "atmel,24c01"; |
| 109 |
reg = <0x55>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
&sgpio { |
| 114 |
pinctrl-0 = <&sgpio_a_pins>; |
| 115 |
pinctrl-names = "default"; |
| 116 |
microchip,sgpio-port-ranges = <0 3>; |
| 117 |
status = "okay"; |
| 118 |
|
| 119 |
gpio@0 { |
| 120 |
ngpios = <64>; |
| 121 |
}; |
| 122 |
gpio@1 { |
| 123 |
ngpios = <64>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
&usart3 { |
| 128 |
pinctrl-0 = <&fc3_b_pins>; |
| 129 |
pinctrl-names = "default"; |
| 130 |
status = "okay"; |
| 131 |
}; |