| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* ethernut5.dts - Device Tree file for Ethernut 5 board |
| 4 |
* |
| 5 |
* Copyright (C) 2012 egnite GmbH <[email protected]> |
| 6 |
*/ |
| 7 |
/dts-v1/; |
| 8 |
#include "at91sam9xe.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Ethernut 5"; |
| 12 |
compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9"; |
| 13 |
|
| 14 |
chosen { |
| 15 |
bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2"; |
| 16 |
}; |
| 17 |
|
| 18 |
memory@20000000 { |
| 19 |
reg = <0x20000000 0x08000000>; |
| 20 |
}; |
| 21 |
|
| 22 |
clocks { |
| 23 |
slow_xtal { |
| 24 |
clock-frequency = <32768>; |
| 25 |
}; |
| 26 |
|
| 27 |
main_xtal { |
| 28 |
clock-frequency = <18432000>; |
| 29 |
}; |
| 30 |
}; |
| 31 |
|
| 32 |
ahb { |
| 33 |
apb { |
| 34 |
dbgu: serial@fffff200 { |
| 35 |
status = "okay"; |
| 36 |
}; |
| 37 |
|
| 38 |
tcb0: timer@fffa0000 { |
| 39 |
timer@0 { |
| 40 |
compatible = "atmel,tcb-timer"; |
| 41 |
reg = <0>, <1>; |
| 42 |
}; |
| 43 |
|
| 44 |
timer@2 { |
| 45 |
compatible = "atmel,tcb-timer"; |
| 46 |
reg = <2>; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
usart0: serial@fffb0000 { |
| 51 |
status = "okay"; |
| 52 |
}; |
| 53 |
|
| 54 |
usart1: serial@fffb4000 { |
| 55 |
status = "okay"; |
| 56 |
}; |
| 57 |
|
| 58 |
macb0: ethernet@fffc4000 { |
| 59 |
phy-mode = "rmii"; |
| 60 |
status = "okay"; |
| 61 |
}; |
| 62 |
|
| 63 |
usb1: gadget@fffa4000 { |
| 64 |
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; |
| 65 |
status = "okay"; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
ebi: ebi@10000000 { |
| 70 |
status = "okay"; |
| 71 |
|
| 72 |
nand_controller: nand-controller { |
| 73 |
status = "okay"; |
| 74 |
pinctrl-0 = <&pinctrl_nand_cs>; |
| 75 |
pinctrl-names = "default"; |
| 76 |
|
| 77 |
nand: nand@3 { |
| 78 |
reg = <0x3 0x0 0x800000>; |
| 79 |
cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; |
| 80 |
nand-bus-width = <8>; |
| 81 |
nand-ecc-mode = "soft"; |
| 82 |
nand-on-flash-bbt; |
| 83 |
label = "atmel_nand"; |
| 84 |
|
| 85 |
partitions { |
| 86 |
compatible = "fixed-partitions"; |
| 87 |
#address-cells = <1>; |
| 88 |
#size-cells = <1>; |
| 89 |
|
| 90 |
root@0 { |
| 91 |
label = "root"; |
| 92 |
reg = <0x0 0x08000000>; |
| 93 |
}; |
| 94 |
|
| 95 |
data@20000 { |
| 96 |
label = "data"; |
| 97 |
reg = <0x08000000 0x38000000>; |
| 98 |
}; |
| 99 |
}; |
| 100 |
}; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
usb0: usb@500000 { |
| 105 |
num-ports = <2>; |
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
i2c-gpio-0 { |
| 111 |
status = "okay"; |
| 112 |
|
| 113 |
pcf8563@50 { |
| 114 |
compatible = "nxp,pcf8563"; |
| 115 |
reg = <0x51>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
}; |