| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module |
| 4 |
* |
| 5 |
* Copyright (C) 2013 Atmel, |
| 6 |
* 2013 Ludovic Desroches <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
/ { |
| 10 |
compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; |
| 11 |
|
| 12 |
chosen { |
| 13 |
bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; |
| 14 |
stdout-path = "serial0:115200n8"; |
| 15 |
}; |
| 16 |
|
| 17 |
memory@20000000 { |
| 18 |
reg = <0x20000000 0x20000000>; |
| 19 |
}; |
| 20 |
|
| 21 |
clocks { |
| 22 |
slow_xtal { |
| 23 |
clock-frequency = <32768>; |
| 24 |
}; |
| 25 |
|
| 26 |
main_xtal { |
| 27 |
clock-frequency = <12000000>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
ahb { |
| 32 |
apb { |
| 33 |
spi0: spi@f0004000 { |
| 34 |
cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; |
| 35 |
}; |
| 36 |
|
| 37 |
tcb0: timer@f0010000 { |
| 38 |
timer@0 { |
| 39 |
compatible = "atmel,tcb-timer"; |
| 40 |
reg = <0>; |
| 41 |
}; |
| 42 |
|
| 43 |
timer@1 { |
| 44 |
compatible = "atmel,tcb-timer"; |
| 45 |
reg = <1>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
ebi@10000000 { |
| 51 |
pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>; |
| 52 |
pinctr-name = "default"; |
| 53 |
status = "okay"; |
| 54 |
|
| 55 |
nor: flash@0,0 { |
| 56 |
compatible = "cfi-flash"; |
| 57 |
linux,mtd-name = "physmap-flash.0"; |
| 58 |
#address-cells = <1>; |
| 59 |
#size-cells = <1>; |
| 60 |
reg = <0x0 0x0 0x1000000>; |
| 61 |
bank-width = <2>; |
| 62 |
atmel,smc-read-mode = "nrd"; |
| 63 |
atmel,smc-write-mode = "nwe"; |
| 64 |
atmel,smc-bus-width = <16>; |
| 65 |
atmel,smc-ncs-rd-setup-ns = <0>; |
| 66 |
atmel,smc-ncs-wr-setup-ns = <0>; |
| 67 |
atmel,smc-nwe-setup-ns = <8>; |
| 68 |
atmel,smc-nrd-setup-ns = <16>; |
| 69 |
atmel,smc-ncs-rd-pulse-ns = <84>; |
| 70 |
atmel,smc-ncs-wr-pulse-ns = <84>; |
| 71 |
atmel,smc-nrd-pulse-ns = <76>; |
| 72 |
atmel,smc-nwe-pulse-ns = <76>; |
| 73 |
atmel,smc-nrd-cycle-ns = <107>; |
| 74 |
atmel,smc-nwe-cycle-ns = <84>; |
| 75 |
atmel,smc-tdf-ns = <16>; |
| 76 |
}; |
| 77 |
|
| 78 |
nand_controller: nand-controller { |
| 79 |
status = "okay"; |
| 80 |
|
| 81 |
nand@3 { |
| 82 |
reg = <0x3 0x0 0x2>; |
| 83 |
atmel,rb = <0>; |
| 84 |
nand-ecc-mode = "hw"; |
| 85 |
nand-ecc-strength = <4>; |
| 86 |
nand-ecc-step-size = <512>; |
| 87 |
nand-on-flash-bbt; |
| 88 |
label = "atmel_nand"; |
| 89 |
|
| 90 |
partitions { |
| 91 |
compatible = "fixed-partitions"; |
| 92 |
#address-cells = <1>; |
| 93 |
#size-cells = <1>; |
| 94 |
|
| 95 |
at91bootstrap@0 { |
| 96 |
label = "at91bootstrap"; |
| 97 |
reg = <0x0 0x40000>; |
| 98 |
}; |
| 99 |
|
| 100 |
bootloader@40000 { |
| 101 |
label = "bootloader"; |
| 102 |
reg = <0x40000 0x80000>; |
| 103 |
}; |
| 104 |
|
| 105 |
bootloaderenv@c0000 { |
| 106 |
label = "bootloader env"; |
| 107 |
reg = <0xc0000 0xc0000>; |
| 108 |
}; |
| 109 |
|
| 110 |
dtb@180000 { |
| 111 |
label = "device tree"; |
| 112 |
reg = <0x180000 0x80000>; |
| 113 |
}; |
| 114 |
|
| 115 |
kernel@200000 { |
| 116 |
label = "kernel"; |
| 117 |
reg = <0x200000 0x600000>; |
| 118 |
}; |
| 119 |
|
| 120 |
rootfs@800000 { |
| 121 |
label = "rootfs"; |
| 122 |
reg = <0x800000 0x0f800000>; |
| 123 |
}; |
| 124 |
}; |
| 125 |
}; |
| 126 |
}; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
leds { |
| 131 |
compatible = "gpio-leds"; |
| 132 |
|
| 133 |
led-d2 { |
| 134 |
label = "d2"; |
| 135 |
gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ |
| 136 |
linux,default-trigger = "heartbeat"; |
| 137 |
}; |
| 138 |
}; |
| 139 |
}; |