| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board |
| 4 |
* |
| 5 |
* Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC) |
| 6 |
* |
| 7 |
* Copyright (C) 2013 Douglas Gilbert <[email protected]> |
| 8 |
*/ |
| 9 |
/dts-v1/; |
| 10 |
#include "at91sam9g20.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Acme Systems FoxG20"; |
| 14 |
compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9"; |
| 15 |
|
| 16 |
chosen { |
| 17 |
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; |
| 18 |
}; |
| 19 |
|
| 20 |
memory@20000000 { |
| 21 |
reg = <0x20000000 0x4000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
clocks { |
| 25 |
slow_xtal { |
| 26 |
clock-frequency = <32768>; |
| 27 |
}; |
| 28 |
|
| 29 |
main_xtal { |
| 30 |
clock-frequency = <18432000>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
ahb { |
| 35 |
apb { |
| 36 |
tcb0: timer@fffa0000 { |
| 37 |
timer@0 { |
| 38 |
compatible = "atmel,tcb-timer"; |
| 39 |
reg = <0>, <1>; |
| 40 |
}; |
| 41 |
|
| 42 |
timer@2 { |
| 43 |
compatible = "atmel,tcb-timer"; |
| 44 |
reg = <2>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
usb1: gadget@fffa4000 { |
| 49 |
atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>; |
| 50 |
status = "okay"; |
| 51 |
}; |
| 52 |
|
| 53 |
mmc0: mmc@fffa8000 { |
| 54 |
pinctrl-0 = < |
| 55 |
&pinctrl_mmc0_clk |
| 56 |
&pinctrl_mmc0_slot1_cmd_dat0 |
| 57 |
&pinctrl_mmc0_slot1_dat1_3>; |
| 58 |
pinctrl-names = "default"; |
| 59 |
status = "okay"; |
| 60 |
|
| 61 |
slot@1 { |
| 62 |
reg = <1>; |
| 63 |
bus-width = <4>; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
usart0: serial@fffb0000 { |
| 68 |
pinctrl-0 = |
| 69 |
<&pinctrl_usart0 |
| 70 |
&pinctrl_usart0_rts |
| 71 |
&pinctrl_usart0_cts |
| 72 |
>; |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
usart1: serial@fffb4000 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
usart2: serial@fffb8000 { |
| 81 |
status = "okay"; |
| 82 |
}; |
| 83 |
|
| 84 |
macb0: ethernet@fffc4000 { |
| 85 |
phy-mode = "rmii"; |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
usart3: serial@fffd0000 { |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
uart0: serial@fffd4000 { |
| 94 |
status = "okay"; |
| 95 |
}; |
| 96 |
|
| 97 |
uart1: serial@fffd8000 { |
| 98 |
status = "okay"; |
| 99 |
}; |
| 100 |
|
| 101 |
dbgu: serial@fffff200 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
pinctrl@fffff400 { |
| 106 |
board { |
| 107 |
pinctrl_pck0_as_mck: pck0_as_mck { |
| 108 |
atmel,pins = |
| 109 |
<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
mmc0_slot1 { |
| 114 |
pinctrl_board_mmc0_slot1: mmc0_slot1-board { |
| 115 |
atmel,pins = |
| 116 |
<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */ |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
i2c0 { |
| 121 |
pinctrl_i2c0: i2c0-0 { |
| 122 |
atmel,pins = |
| 123 |
<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */ |
| 124 |
AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */ |
| 125 |
}; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
watchdog@fffffd40 { |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
usb0: usb@500000 { |
| 135 |
num-ports = <2>; |
| 136 |
status = "okay"; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
i2c-gpio-0 { |
| 141 |
pinctrl-names = "default"; |
| 142 |
pinctrl-0 = <&pinctrl_i2c0>; |
| 143 |
i2c-gpio,delay-us = <5>; /* ~85 kHz */ |
| 144 |
status = "okay"; |
| 145 |
}; |
| 146 |
|
| 147 |
leds { |
| 148 |
compatible = "gpio-leds"; |
| 149 |
|
| 150 |
/* red LED marked "PC7" near mini USB (device) receptacle */ |
| 151 |
user_led { |
| 152 |
label = "user_led"; |
| 153 |
gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */ |
| 154 |
linux,default-trigger = "heartbeat"; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
gpio-keys { |
| 159 |
compatible = "gpio-keys"; |
| 160 |
|
| 161 |
button { |
| 162 |
label = "Button"; |
| 163 |
gpios = <&pioC 4 GPIO_ACTIVE_LOW>; |
| 164 |
linux,code = <0x103>; |
| 165 |
wakeup-source; |
| 166 |
}; |
| 167 |
}; |
| 168 |
}; |