| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board |
| 4 |
* |
| 5 |
* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries |
| 6 |
* |
| 7 |
* Author: Horatiu Vultur <[email protected]> |
| 8 |
*/ |
| 9 |
/dts-v1/; |
| 10 |
#include "lan966x.dtsi" |
| 11 |
#include "dt-bindings/phy/phy-lan966x-serdes.h" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Microchip EVB LAN9668"; |
| 15 |
compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966"; |
| 16 |
|
| 17 |
gpio-restart { |
| 18 |
compatible = "gpio-restart"; |
| 19 |
gpios = <&gpio 56 GPIO_ACTIVE_LOW>; |
| 20 |
priority = <200>; |
| 21 |
}; |
| 22 |
}; |
| 23 |
|
| 24 |
&aes { |
| 25 |
status = "disabled"; /* Reserved by secure OS */ |
| 26 |
}; |
| 27 |
|
| 28 |
&gpio { |
| 29 |
miim_a_pins: mdio-pins { |
| 30 |
/* MDC, MDIO */ |
| 31 |
pins = "GPIO_28", "GPIO_29"; |
| 32 |
function = "miim_a"; |
| 33 |
}; |
| 34 |
|
| 35 |
pps_out_pins: pps-out-pins { |
| 36 |
/* 1pps output */ |
| 37 |
pins = "GPIO_38"; |
| 38 |
function = "ptpsync_3"; |
| 39 |
}; |
| 40 |
|
| 41 |
ptp_ext_pins: ptp-ext-pins { |
| 42 |
/* 1pps input */ |
| 43 |
pins = "GPIO_35"; |
| 44 |
function = "ptpsync_0"; |
| 45 |
}; |
| 46 |
|
| 47 |
udc_pins: ucd-pins { |
| 48 |
/* VBUS_DET B */ |
| 49 |
pins = "GPIO_8"; |
| 50 |
function = "usb_slave_b"; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
&mdio0 { |
| 55 |
pinctrl-0 = <&miim_a_pins>; |
| 56 |
pinctrl-names = "default"; |
| 57 |
reset-gpios = <&gpio 53 GPIO_ACTIVE_LOW>; |
| 58 |
status = "okay"; |
| 59 |
|
| 60 |
ext_phy0: ethernet-phy@7 { |
| 61 |
reg = <7>; |
| 62 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 63 |
interrupt-parent = <&gpio>; |
| 64 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 65 |
}; |
| 66 |
|
| 67 |
ext_phy1: ethernet-phy@8 { |
| 68 |
reg = <8>; |
| 69 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 70 |
interrupt-parent = <&gpio>; |
| 71 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 72 |
}; |
| 73 |
|
| 74 |
ext_phy2: ethernet-phy@9 { |
| 75 |
reg = <9>; |
| 76 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 77 |
interrupt-parent = <&gpio>; |
| 78 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 79 |
}; |
| 80 |
|
| 81 |
ext_phy3: ethernet-phy@10 { |
| 82 |
reg = <10>; |
| 83 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 84 |
interrupt-parent = <&gpio>; |
| 85 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 86 |
}; |
| 87 |
|
| 88 |
ext_phy4: ethernet-phy@15 { |
| 89 |
reg = <15>; |
| 90 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 91 |
interrupt-parent = <&gpio>; |
| 92 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 93 |
}; |
| 94 |
|
| 95 |
ext_phy5: ethernet-phy@16 { |
| 96 |
reg = <16>; |
| 97 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 98 |
interrupt-parent = <&gpio>; |
| 99 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 100 |
}; |
| 101 |
|
| 102 |
ext_phy6: ethernet-phy@17 { |
| 103 |
reg = <17>; |
| 104 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 105 |
interrupt-parent = <&gpio>; |
| 106 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 107 |
}; |
| 108 |
|
| 109 |
ext_phy7: ethernet-phy@18 { |
| 110 |
reg = <18>; |
| 111 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 112 |
interrupt-parent = <&gpio>; |
| 113 |
coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
&port0 { |
| 118 |
reg = <2>; |
| 119 |
phy-handle = <&ext_phy2>; |
| 120 |
phy-mode = "qsgmii"; |
| 121 |
phys = <&serdes 0 SERDES6G(1)>; |
| 122 |
status = "okay"; |
| 123 |
}; |
| 124 |
|
| 125 |
&port1 { |
| 126 |
reg = <3>; |
| 127 |
phy-handle = <&ext_phy3>; |
| 128 |
phy-mode = "qsgmii"; |
| 129 |
phys = <&serdes 1 SERDES6G(1)>; |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
|
| 133 |
&port2 { |
| 134 |
reg = <0>; |
| 135 |
phy-handle = <&ext_phy0>; |
| 136 |
phy-mode = "qsgmii"; |
| 137 |
phys = <&serdes 2 SERDES6G(1)>; |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&port3 { |
| 142 |
reg = <1>; |
| 143 |
phy-handle = <&ext_phy1>; |
| 144 |
phy-mode = "qsgmii"; |
| 145 |
phys = <&serdes 3 SERDES6G(1)>; |
| 146 |
status = "okay"; |
| 147 |
}; |
| 148 |
|
| 149 |
&port4 { |
| 150 |
reg = <6>; |
| 151 |
phy-handle = <&ext_phy6>; |
| 152 |
phy-mode = "qsgmii"; |
| 153 |
phys = <&serdes 4 SERDES6G(2)>; |
| 154 |
status = "okay"; |
| 155 |
}; |
| 156 |
|
| 157 |
&port5 { |
| 158 |
reg = <7>; |
| 159 |
phy-handle = <&ext_phy7>; |
| 160 |
phy-mode = "qsgmii"; |
| 161 |
phys = <&serdes 5 SERDES6G(2)>; |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
&port6 { |
| 166 |
reg = <4>; |
| 167 |
phy-handle = <&ext_phy4>; |
| 168 |
phy-mode = "qsgmii"; |
| 169 |
phys = <&serdes 6 SERDES6G(2)>; |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&port7 { |
| 174 |
reg = <5>; |
| 175 |
phy-handle = <&ext_phy5>; |
| 176 |
phy-mode = "qsgmii"; |
| 177 |
phys = <&serdes 7 SERDES6G(2)>; |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&serdes { |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
&switch { |
| 186 |
pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>; |
| 187 |
pinctrl-names = "default"; |
| 188 |
status = "okay"; |
| 189 |
}; |
| 190 |
|
| 191 |
&udc { |
| 192 |
pinctrl-0 = <&udc_pins>; |
| 193 |
pinctrl-names = "default"; |
| 194 |
atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; |
| 195 |
status = "okay"; |
| 196 |
}; |