| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* at91-kizbox2_common.dtsi - Device Tree Include file for |
| 4 |
* Overkiz Kizbox 2 family SoC |
| 5 |
* |
| 6 |
* Copyright (C) 2014-2018 Overkiz SAS |
| 7 |
* |
| 8 |
* Authors: Antoine Aubert <[email protected]> |
| 9 |
* Gaël Portay <[email protected]> |
| 10 |
* Kévin Raymond <[email protected]> |
| 11 |
*/ |
| 12 |
#include "sama5d31.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
chosen { |
| 16 |
bootargs = "ubi.mtd=ubi"; |
| 17 |
stdout-path = &dbgu; |
| 18 |
}; |
| 19 |
|
| 20 |
memory@20000000 { |
| 21 |
reg = <0x20000000 0x10000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
clocks { |
| 25 |
slow_xtal { |
| 26 |
clock-frequency = <32768>; |
| 27 |
}; |
| 28 |
|
| 29 |
main_xtal { |
| 30 |
clock-frequency = <12000000>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
gpio-keys { |
| 35 |
compatible = "gpio-keys"; |
| 36 |
|
| 37 |
button-prog { |
| 38 |
label = "PB_PROG"; |
| 39 |
gpios = <&pioE 27 GPIO_ACTIVE_LOW>; |
| 40 |
linux,code = <0x102>; |
| 41 |
wakeup-source; |
| 42 |
}; |
| 43 |
|
| 44 |
button-reset { |
| 45 |
label = "PB_RST"; |
| 46 |
gpios = <&pioE 29 GPIO_ACTIVE_LOW>; |
| 47 |
linux,code = <0x100>; |
| 48 |
wakeup-source; |
| 49 |
}; |
| 50 |
|
| 51 |
button-user { |
| 52 |
label = "PB_USER"; |
| 53 |
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; |
| 54 |
linux,code = <0x101>; |
| 55 |
wakeup-source; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
led-controller { |
| 60 |
compatible = "pwm-leds"; |
| 61 |
|
| 62 |
led-1 { |
| 63 |
label = "pwm:blue:user"; |
| 64 |
pwms = <&pwm0 2 10000000 0>; |
| 65 |
max-brightness = <255>; |
| 66 |
linux,default-trigger = "none"; |
| 67 |
}; |
| 68 |
|
| 69 |
led-2 { |
| 70 |
label = "pwm:green:user"; |
| 71 |
pwms = <&pwm0 1 10000000 0>; |
| 72 |
max-brightness = <255>; |
| 73 |
linux,default-trigger = "default-on"; |
| 74 |
}; |
| 75 |
|
| 76 |
led-3 { |
| 77 |
label = "pwm:red:user"; |
| 78 |
pwms = <&pwm0 0 10000000 0>; |
| 79 |
max-brightness = <255>; |
| 80 |
linux,default-trigger = "default-on"; |
| 81 |
}; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
&i2c1 { |
| 86 |
status = "okay"; |
| 87 |
|
| 88 |
act8865: pmic@5b { |
| 89 |
compatible = "active-semi,act8865"; |
| 90 |
reg = <0x5b>; |
| 91 |
status = "okay"; |
| 92 |
|
| 93 |
regulators { |
| 94 |
vcc_1v8_reg: DCDC_REG1 { |
| 95 |
regulator-name = "VCC_1V8"; |
| 96 |
regulator-min-microvolt = <1800000>; |
| 97 |
regulator-max-microvolt = <1800000>; |
| 98 |
regulator-always-on; |
| 99 |
}; |
| 100 |
|
| 101 |
vcc_1v2_reg: DCDC_REG2 { |
| 102 |
regulator-name = "VCC_1V2"; |
| 103 |
regulator-min-microvolt = <1200000>; |
| 104 |
regulator-max-microvolt = <1200000>; |
| 105 |
regulator-always-on; |
| 106 |
}; |
| 107 |
|
| 108 |
vcc_3v3_reg: DCDC_REG3 { |
| 109 |
regulator-name = "VCC_3V3"; |
| 110 |
regulator-min-microvolt = <3300000>; |
| 111 |
regulator-max-microvolt = <3300000>; |
| 112 |
regulator-always-on; |
| 113 |
}; |
| 114 |
|
| 115 |
vddfuse_reg: LDO_REG1 { |
| 116 |
regulator-name = "FUSE_2V5"; |
| 117 |
regulator-min-microvolt = <2500000>; |
| 118 |
regulator-max-microvolt = <2500000>; |
| 119 |
}; |
| 120 |
|
| 121 |
vddana_reg: LDO_REG2 { |
| 122 |
regulator-name = "VDDANA"; |
| 123 |
regulator-min-microvolt = <3300000>; |
| 124 |
regulator-max-microvolt = <3300000>; |
| 125 |
regulator-always-on; |
| 126 |
}; |
| 127 |
|
| 128 |
vled_reg: LDO_REG3 { |
| 129 |
regulator-name = "VLED"; |
| 130 |
regulator-min-microvolt = <3300000>; |
| 131 |
regulator-max-microvolt = <3300000>; |
| 132 |
regulator-always-on; |
| 133 |
}; |
| 134 |
|
| 135 |
v3v8_rf_reg: LDO_REG4 { |
| 136 |
regulator-name = "V3V8_RF"; |
| 137 |
regulator-min-microvolt = <3800000>; |
| 138 |
regulator-max-microvolt = <3800000>; |
| 139 |
regulator-always-on; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
&usart0 { |
| 146 |
atmel,use-dma-rx; |
| 147 |
atmel,use-dma-tx; |
| 148 |
status = "disabled"; |
| 149 |
}; |
| 150 |
|
| 151 |
&usart1 { |
| 152 |
atmel,use-dma-rx; |
| 153 |
atmel,use-dma-tx; |
| 154 |
status = "disabled"; |
| 155 |
}; |
| 156 |
|
| 157 |
&usart2 { |
| 158 |
atmel,use-dma-rx; |
| 159 |
atmel,use-dma-tx; |
| 160 |
status = "disabled"; |
| 161 |
}; |
| 162 |
|
| 163 |
&pwm0 { |
| 164 |
pinctrl-names = "default"; |
| 165 |
pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 |
| 166 |
&pinctrl_pwm0_pwmh1_1 |
| 167 |
&pinctrl_pwm0_pwmh2_0>; |
| 168 |
status = "okay"; |
| 169 |
}; |
| 170 |
|
| 171 |
&adc0 { |
| 172 |
atmel,adc-vref = <3333>; |
| 173 |
status = "okay"; |
| 174 |
}; |
| 175 |
|
| 176 |
&macb1 { |
| 177 |
phy-mode = "rmii"; |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&dbgu { |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
&watchdog { |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&ebi { |
| 190 |
pinctrl-0 = <&pinctrl_ebi_nand_addr>; |
| 191 |
pinctrl-names = "default"; |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&nand_controller { |
| 196 |
status = "okay"; |
| 197 |
|
| 198 |
nand@3 { |
| 199 |
reg = <0x3 0x0 0x2>; |
| 200 |
atmel,rb = <0>; |
| 201 |
nand-bus-width = <8>; |
| 202 |
nand-ecc-mode = "hw"; |
| 203 |
nand-ecc-strength = <4>; |
| 204 |
nand-ecc-step-size = <512>; |
| 205 |
nand-on-flash-bbt; |
| 206 |
label = "atmel_nand"; |
| 207 |
|
| 208 |
partitions { |
| 209 |
compatible = "fixed-partitions"; |
| 210 |
#address-cells = <1>; |
| 211 |
#size-cells = <1>; |
| 212 |
|
| 213 |
bootstrap@0 { |
| 214 |
label = "bootstrap"; |
| 215 |
reg = <0x0 0x20000>; |
| 216 |
}; |
| 217 |
|
| 218 |
ubi@20000 { |
| 219 |
label = "ubi"; |
| 220 |
reg = <0x20000 0x7fe0000>; |
| 221 |
}; |
| 222 |
}; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
&usb1 { |
| 227 |
status = "okay"; |
| 228 |
}; |
| 229 |
|
| 230 |
&usb2 { |
| 231 |
status = "okay"; |
| 232 |
}; |
| 233 |
|
| 234 |
/* WMBUS (inverted with IO in the latest schematic) */ |
| 235 |
&pinctrl_usart0 { |
| 236 |
atmel,pins = |
| 237 |
<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 238 |
AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP |
| 239 |
AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; |
| 240 |
}; |
| 241 |
|
| 242 |
/* RTS */ |
| 243 |
&pinctrl_usart1 { |
| 244 |
atmel,pins = |
| 245 |
<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 246 |
AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP |
| 247 |
AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; |
| 248 |
}; |
| 249 |
|
| 250 |
/* IO (inverted with WMBUS in the latest schematic) */ |
| 251 |
&pinctrl_usart2 { |
| 252 |
atmel,pins = |
| 253 |
<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE |
| 254 |
AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP |
| 255 |
AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; |
| 256 |
}; |