| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Atmel, |
| 6 |
* 2014 Nicolas Ferre <[email protected]> |
| 7 |
*/ |
| 8 |
/dts-v1/; |
| 9 |
#include "sama5d4.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Atmel SAMA5D4-EK"; |
| 13 |
compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; |
| 14 |
|
| 15 |
chosen { |
| 16 |
stdout-path = "serial0:115200n8"; |
| 17 |
}; |
| 18 |
|
| 19 |
memory@20000000 { |
| 20 |
reg = <0x20000000 0x20000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
clocks { |
| 24 |
slow_xtal { |
| 25 |
clock-frequency = <32768>; |
| 26 |
}; |
| 27 |
|
| 28 |
main_xtal { |
| 29 |
clock-frequency = <12000000>; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
ahb { |
| 34 |
apb { |
| 35 |
adc0: adc@fc034000 { |
| 36 |
pinctrl-names = "default"; |
| 37 |
pinctrl-0 = < |
| 38 |
/* external trigger conflicts with USBA_VBUS */ |
| 39 |
&pinctrl_adc0_ad0 |
| 40 |
&pinctrl_adc0_ad1 |
| 41 |
&pinctrl_adc0_ad2 |
| 42 |
&pinctrl_adc0_ad3 |
| 43 |
&pinctrl_adc0_ad4 |
| 44 |
>; |
| 45 |
/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */ |
| 46 |
atmel,adc-vref = <3300>; |
| 47 |
/*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */ |
| 48 |
status = "okay"; /* Enable ADC IIO support */ |
| 49 |
}; |
| 50 |
|
| 51 |
mmc0: mmc@f8000000 { |
| 52 |
pinctrl-names = "default"; |
| 53 |
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; |
| 54 |
slot@0 { |
| 55 |
reg = <0>; |
| 56 |
bus-width = <4>; |
| 57 |
cd-gpios = <&pioE 5 0>; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
ssc0: ssc@f8008000 { |
| 62 |
status = "okay"; |
| 63 |
}; |
| 64 |
|
| 65 |
spi0: spi@f8010000 { |
| 66 |
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; |
| 67 |
status = "okay"; |
| 68 |
flash@0 { |
| 69 |
compatible = "atmel,at25df321a"; |
| 70 |
spi-max-frequency = <50000000>; |
| 71 |
reg = <0>; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
i2c0: i2c@f8014000 { |
| 76 |
status = "okay"; |
| 77 |
|
| 78 |
wm8904: codec@1a { |
| 79 |
compatible = "wlf,wm8904"; |
| 80 |
reg = <0x1a>; |
| 81 |
clocks = <&pmc PMC_TYPE_SYSTEM 10>; |
| 82 |
clock-names = "mclk"; |
| 83 |
}; |
| 84 |
|
| 85 |
qt1070:keyboard@1b { |
| 86 |
compatible = "qt1070"; |
| 87 |
reg = <0x1b>; |
| 88 |
interrupt-parent = <&pioE>; |
| 89 |
interrupts = <25 0x0>; |
| 90 |
pinctrl-names = "default"; |
| 91 |
pinctrl-0 = <&pinctrl_qt1070_irq>; |
| 92 |
wakeup-source; |
| 93 |
}; |
| 94 |
|
| 95 |
touchscreen@4c { |
| 96 |
compatible = "atmel,maxtouch"; |
| 97 |
reg = <0x4c>; |
| 98 |
interrupt-parent = <&pioE>; |
| 99 |
interrupts = <24 0x0>; |
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&pinctrl_mxt_ts>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
macb0: ethernet@f8020000 { |
| 106 |
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; |
| 107 |
phy-mode = "rmii"; |
| 108 |
status = "okay"; |
| 109 |
|
| 110 |
ethernet-phy@1 { |
| 111 |
reg = <0x1>; |
| 112 |
interrupt-parent = <&pioE>; |
| 113 |
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
mmc1: mmc@fc000000 { |
| 118 |
pinctrl-names = "default"; |
| 119 |
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; |
| 120 |
status = "okay"; |
| 121 |
slot@0 { |
| 122 |
reg = <0>; |
| 123 |
bus-width = <4>; |
| 124 |
cd-gpios = <&pioE 6 0>; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
usart2: serial@fc008000 { |
| 129 |
status = "okay"; |
| 130 |
}; |
| 131 |
|
| 132 |
usart3: serial@fc00c000 { |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
|
| 136 |
usart4: serial@fc010000 { |
| 137 |
status = "okay"; |
| 138 |
}; |
| 139 |
|
| 140 |
tcb2: timer@fc024000 { |
| 141 |
timer@0 { |
| 142 |
compatible = "atmel,tcb-timer"; |
| 143 |
reg = <0>; |
| 144 |
}; |
| 145 |
|
| 146 |
timer@1 { |
| 147 |
compatible = "atmel,tcb-timer"; |
| 148 |
reg = <1>; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
watchdog@fc068640 { |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
pinctrl@fc06a000 { |
| 157 |
board { |
| 158 |
pinctrl_macb0_phy_irq: macb0_phy_irq { |
| 159 |
atmel,pins = |
| 160 |
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 161 |
}; |
| 162 |
pinctrl_mmc0_cd: mmc0_cd { |
| 163 |
atmel,pins = |
| 164 |
<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 165 |
}; |
| 166 |
pinctrl_mmc1_cd: mmc1_cd { |
| 167 |
atmel,pins = |
| 168 |
<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 169 |
}; |
| 170 |
pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { |
| 171 |
atmel,pins = |
| 172 |
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 173 |
}; |
| 174 |
pinctrl_usba_vbus: usba_vbus { |
| 175 |
atmel,pins = |
| 176 |
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 177 |
}; |
| 178 |
pinctrl_key_gpio: key_gpio_0 { |
| 179 |
atmel,pins = |
| 180 |
<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */ |
| 181 |
}; |
| 182 |
pinctrl_qt1070_irq: qt1070_irq { |
| 183 |
atmel,pins = |
| 184 |
<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 185 |
}; |
| 186 |
pinctrl_mxt_ts: mxt_irq { |
| 187 |
atmel,pins = |
| 188 |
<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
usb0: gadget@400000 { |
| 195 |
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; |
| 196 |
pinctrl-names = "default"; |
| 197 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
usb1: usb@500000 { |
| 202 |
num-ports = <3>; |
| 203 |
atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ |
| 204 |
&pioE 11 GPIO_ACTIVE_LOW |
| 205 |
&pioE 12 GPIO_ACTIVE_LOW |
| 206 |
>; |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
usb2: usb@600000 { |
| 211 |
status = "okay"; |
| 212 |
}; |
| 213 |
|
| 214 |
ebi: ebi@10000000 { |
| 215 |
pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe |
| 216 |
&pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy |
| 217 |
&pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>; |
| 218 |
pinctrl-names = "default"; |
| 219 |
status = "okay"; |
| 220 |
|
| 221 |
nand_controller: nand-controller { |
| 222 |
status = "okay"; |
| 223 |
|
| 224 |
nand@3 { |
| 225 |
reg = <0x3 0x0 0x2>; |
| 226 |
atmel,rb = <0>; |
| 227 |
nand-bus-width = <8>; |
| 228 |
nand-ecc-mode = "hw"; |
| 229 |
nand-on-flash-bbt; |
| 230 |
label = "atmel_nand"; |
| 231 |
|
| 232 |
partitions { |
| 233 |
compatible = "fixed-partitions"; |
| 234 |
#address-cells = <1>; |
| 235 |
#size-cells = <1>; |
| 236 |
|
| 237 |
at91bootstrap@0 { |
| 238 |
label = "at91bootstrap"; |
| 239 |
reg = <0x0 0x40000>; |
| 240 |
}; |
| 241 |
|
| 242 |
bootloader@40000 { |
| 243 |
label = "bootloader"; |
| 244 |
reg = <0x40000 0x80000>; |
| 245 |
}; |
| 246 |
|
| 247 |
bootloaderenv@c0000 { |
| 248 |
label = "bootloader env"; |
| 249 |
reg = <0xc0000 0xc0000>; |
| 250 |
}; |
| 251 |
|
| 252 |
dtb@180000 { |
| 253 |
label = "device tree"; |
| 254 |
reg = <0x180000 0x80000>; |
| 255 |
}; |
| 256 |
|
| 257 |
kernel@200000 { |
| 258 |
label = "kernel"; |
| 259 |
reg = <0x200000 0x600000>; |
| 260 |
}; |
| 261 |
|
| 262 |
rootfs@800000 { |
| 263 |
label = "rootfs"; |
| 264 |
reg = <0x800000 0x0f800000>; |
| 265 |
}; |
| 266 |
}; |
| 267 |
}; |
| 268 |
}; |
| 269 |
}; |
| 270 |
}; |
| 271 |
|
| 272 |
gpio-keys { |
| 273 |
compatible = "gpio-keys"; |
| 274 |
|
| 275 |
pinctrl-names = "default"; |
| 276 |
pinctrl-0 = <&pinctrl_key_gpio>; |
| 277 |
|
| 278 |
button { |
| 279 |
label = "pb_user1"; |
| 280 |
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; |
| 281 |
linux,code = <0x100>; |
| 282 |
wakeup-source; |
| 283 |
}; |
| 284 |
}; |
| 285 |
|
| 286 |
leds { |
| 287 |
compatible = "gpio-leds"; |
| 288 |
status = "okay"; |
| 289 |
|
| 290 |
led-d8 { |
| 291 |
label = "d8"; |
| 292 |
/* PE28, conflicts with usart4 rts pin */ |
| 293 |
gpios = <&pioE 28 GPIO_ACTIVE_LOW>; |
| 294 |
}; |
| 295 |
|
| 296 |
led-d9 { |
| 297 |
label = "d9"; |
| 298 |
gpios = <&pioE 9 GPIO_ACTIVE_HIGH>; |
| 299 |
}; |
| 300 |
|
| 301 |
led-d10 { |
| 302 |
label = "d10"; |
| 303 |
gpios = <&pioE 8 GPIO_ACTIVE_LOW>; |
| 304 |
linux,default-trigger = "heartbeat"; |
| 305 |
}; |
| 306 |
}; |
| 307 |
|
| 308 |
sound { |
| 309 |
compatible = "atmel,asoc-wm8904"; |
| 310 |
pinctrl-names = "default"; |
| 311 |
pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; |
| 312 |
|
| 313 |
atmel,model = "wm8904 @ SAMA5D4EK"; |
| 314 |
atmel,audio-routing = |
| 315 |
"Headphone Jack", "HPOUTL", |
| 316 |
"Headphone Jack", "HPOUTR", |
| 317 |
"IN1L", "Line In Jack", |
| 318 |
"IN1R", "Line In Jack"; |
| 319 |
|
| 320 |
atmel,ssc-controller = <&ssc0>; |
| 321 |
atmel,audio-codec = <&wm8904>; |
| 322 |
}; |
| 323 |
}; |