| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries |
| 6 |
* |
| 7 |
* Author: Sandeep Sheriker M <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <dt-bindings/dma/at91.h> |
| 11 |
#include <dt-bindings/pinctrl/at91.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/clock/at91.h> |
| 15 |
#include <dt-bindings/mfd/at91-usart.h> |
| 16 |
#include <dt-bindings/mfd/atmel-flexcom.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
#address-cells = <1>; |
| 20 |
#size-cells = <1>; |
| 21 |
model = "Microchip SAM9X60 SoC"; |
| 22 |
compatible = "microchip,sam9x60"; |
| 23 |
interrupt-parent = <&aic>; |
| 24 |
|
| 25 |
aliases { |
| 26 |
serial0 = &dbgu; |
| 27 |
gpio0 = &pioA; |
| 28 |
gpio1 = &pioB; |
| 29 |
gpio2 = &pioC; |
| 30 |
gpio3 = &pioD; |
| 31 |
tcb0 = &tcb0; |
| 32 |
tcb1 = &tcb1; |
| 33 |
}; |
| 34 |
|
| 35 |
cpus { |
| 36 |
#address-cells = <1>; |
| 37 |
#size-cells = <0>; |
| 38 |
|
| 39 |
cpu@0 { |
| 40 |
compatible = "arm,arm926ej-s"; |
| 41 |
device_type = "cpu"; |
| 42 |
reg = <0>; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
memory@20000000 { |
| 47 |
device_type = "memory"; |
| 48 |
reg = <0x20000000 0x10000000>; |
| 49 |
}; |
| 50 |
|
| 51 |
clocks { |
| 52 |
slow_xtal: slow_xtal { |
| 53 |
compatible = "fixed-clock"; |
| 54 |
#clock-cells = <0>; |
| 55 |
}; |
| 56 |
|
| 57 |
main_xtal: main_xtal { |
| 58 |
compatible = "fixed-clock"; |
| 59 |
#clock-cells = <0>; |
| 60 |
}; |
| 61 |
}; |
| 62 |
|
| 63 |
sram: sram@300000 { |
| 64 |
compatible = "mmio-sram"; |
| 65 |
reg = <0x00300000 0x100000>; |
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <1>; |
| 68 |
ranges = <0 0x00300000 0x100000>; |
| 69 |
}; |
| 70 |
|
| 71 |
ahb { |
| 72 |
compatible = "simple-bus"; |
| 73 |
#address-cells = <1>; |
| 74 |
#size-cells = <1>; |
| 75 |
ranges; |
| 76 |
|
| 77 |
usb0: gadget@500000 { |
| 78 |
#address-cells = <1>; |
| 79 |
#size-cells = <0>; |
| 80 |
compatible = "microchip,sam9x60-udc"; |
| 81 |
reg = <0x00500000 0x100000 |
| 82 |
0xf803c000 0x400>; |
| 83 |
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; |
| 84 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 85 |
clock-names = "pclk", "hclk"; |
| 86 |
assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 87 |
assigned-clock-rates = <480000000>; |
| 88 |
status = "disabled"; |
| 89 |
}; |
| 90 |
|
| 91 |
usb1: usb@600000 { |
| 92 |
compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| 93 |
reg = <0x00600000 0x100000>; |
| 94 |
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; |
| 95 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; |
| 96 |
clock-names = "ohci_clk", "hclk", "uhpck"; |
| 97 |
status = "disabled"; |
| 98 |
}; |
| 99 |
|
| 100 |
usb2: usb@700000 { |
| 101 |
compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| 102 |
reg = <0x00700000 0x100000>; |
| 103 |
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; |
| 104 |
clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; |
| 105 |
clock-names = "usb_clk", "ehci_clk"; |
| 106 |
assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 107 |
assigned-clock-rates = <480000000>; |
| 108 |
status = "disabled"; |
| 109 |
}; |
| 110 |
|
| 111 |
ebi: ebi@10000000 { |
| 112 |
compatible = "microchip,sam9x60-ebi"; |
| 113 |
#address-cells = <2>; |
| 114 |
#size-cells = <1>; |
| 115 |
atmel,smc = <&smc>; |
| 116 |
microchip,sfr = <&sfr>; |
| 117 |
reg = <0x10000000 0x60000000>; |
| 118 |
ranges = <0x0 0x0 0x10000000 0x10000000 |
| 119 |
0x1 0x0 0x20000000 0x10000000 |
| 120 |
0x2 0x0 0x30000000 0x10000000 |
| 121 |
0x3 0x0 0x40000000 0x10000000 |
| 122 |
0x4 0x0 0x50000000 0x10000000 |
| 123 |
0x5 0x0 0x60000000 0x10000000>; |
| 124 |
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; |
| 125 |
status = "disabled"; |
| 126 |
|
| 127 |
nand_controller: nand-controller { |
| 128 |
compatible = "microchip,sam9x60-nand-controller"; |
| 129 |
ecc-engine = <&pmecc>; |
| 130 |
#address-cells = <2>; |
| 131 |
#size-cells = <1>; |
| 132 |
ranges; |
| 133 |
status = "disabled"; |
| 134 |
}; |
| 135 |
}; |
| 136 |
|
| 137 |
sdmmc0: sdio-host@80000000 { |
| 138 |
compatible = "microchip,sam9x60-sdhci"; |
| 139 |
reg = <0x80000000 0x300>; |
| 140 |
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; |
| 141 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; |
| 142 |
clock-names = "hclock", "multclk"; |
| 143 |
assigned-clocks = <&pmc PMC_TYPE_GCK 12>; |
| 144 |
assigned-clock-rates = <100000000>; |
| 145 |
status = "disabled"; |
| 146 |
}; |
| 147 |
|
| 148 |
sdmmc1: sdio-host@90000000 { |
| 149 |
compatible = "microchip,sam9x60-sdhci"; |
| 150 |
reg = <0x90000000 0x300>; |
| 151 |
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; |
| 152 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; |
| 153 |
clock-names = "hclock", "multclk"; |
| 154 |
assigned-clocks = <&pmc PMC_TYPE_GCK 26>; |
| 155 |
assigned-clock-rates = <100000000>; |
| 156 |
status = "disabled"; |
| 157 |
}; |
| 158 |
|
| 159 |
apb { |
| 160 |
compatible = "simple-bus"; |
| 161 |
#address-cells = <1>; |
| 162 |
#size-cells = <1>; |
| 163 |
ranges; |
| 164 |
|
| 165 |
flx4: flexcom@f0000000 { |
| 166 |
compatible = "atmel,sama5d2-flexcom"; |
| 167 |
reg = <0xf0000000 0x200>; |
| 168 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; |
| 169 |
#address-cells = <1>; |
| 170 |
#size-cells = <1>; |
| 171 |
ranges = <0x0 0xf0000000 0x800>; |
| 172 |
status = "disabled"; |
| 173 |
|
| 174 |
uart4: serial@200 { |
| 175 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 176 |
reg = <0x200 0x200>; |
| 177 |
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; |
| 178 |
dmas = <&dma0 |
| 179 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 180 |
AT91_XDMAC_DT_PER_IF(1) | |
| 181 |
AT91_XDMAC_DT_PERID(8))>, |
| 182 |
<&dma0 |
| 183 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 184 |
AT91_XDMAC_DT_PER_IF(1) | |
| 185 |
AT91_XDMAC_DT_PERID(9))>; |
| 186 |
dma-names = "tx", "rx"; |
| 187 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; |
| 188 |
clock-names = "usart"; |
| 189 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 190 |
atmel,use-dma-rx; |
| 191 |
atmel,use-dma-tx; |
| 192 |
atmel,fifo-size = <16>; |
| 193 |
status = "disabled"; |
| 194 |
}; |
| 195 |
|
| 196 |
spi4: spi@400 { |
| 197 |
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; |
| 198 |
reg = <0x400 0x200>; |
| 199 |
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; |
| 200 |
#address-cells = <1>; |
| 201 |
#size-cells = <0>; |
| 202 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; |
| 203 |
clock-names = "spi_clk"; |
| 204 |
dmas = <&dma0 |
| 205 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 206 |
AT91_XDMAC_DT_PER_IF(1) | |
| 207 |
AT91_XDMAC_DT_PERID(8))>, |
| 208 |
<&dma0 |
| 209 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 210 |
AT91_XDMAC_DT_PER_IF(1) | |
| 211 |
AT91_XDMAC_DT_PERID(9))>; |
| 212 |
dma-names = "tx", "rx"; |
| 213 |
atmel,fifo-size = <16>; |
| 214 |
status = "disabled"; |
| 215 |
}; |
| 216 |
|
| 217 |
i2c4: i2c@600 { |
| 218 |
compatible = "microchip,sam9x60-i2c"; |
| 219 |
reg = <0x600 0x200>; |
| 220 |
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; |
| 221 |
#address-cells = <1>; |
| 222 |
#size-cells = <0>; |
| 223 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; |
| 224 |
dmas = <&dma0 |
| 225 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 226 |
AT91_XDMAC_DT_PER_IF(1) | |
| 227 |
AT91_XDMAC_DT_PERID(8))>, |
| 228 |
<&dma0 |
| 229 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 230 |
AT91_XDMAC_DT_PER_IF(1) | |
| 231 |
AT91_XDMAC_DT_PERID(9))>; |
| 232 |
dma-names = "tx", "rx"; |
| 233 |
atmel,fifo-size = <16>; |
| 234 |
status = "disabled"; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
flx5: flexcom@f0004000 { |
| 239 |
compatible = "atmel,sama5d2-flexcom"; |
| 240 |
reg = <0xf0004000 0x200>; |
| 241 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; |
| 242 |
#address-cells = <1>; |
| 243 |
#size-cells = <1>; |
| 244 |
ranges = <0x0 0xf0004000 0x800>; |
| 245 |
status = "disabled"; |
| 246 |
|
| 247 |
uart5: serial@200 { |
| 248 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 249 |
reg = <0x200 0x200>; |
| 250 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 251 |
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; |
| 252 |
dmas = <&dma0 |
| 253 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 254 |
AT91_XDMAC_DT_PER_IF(1) | |
| 255 |
AT91_XDMAC_DT_PERID(10))>, |
| 256 |
<&dma0 |
| 257 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 258 |
AT91_XDMAC_DT_PER_IF(1) | |
| 259 |
AT91_XDMAC_DT_PERID(11))>; |
| 260 |
dma-names = "tx", "rx"; |
| 261 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; |
| 262 |
clock-names = "usart"; |
| 263 |
atmel,use-dma-rx; |
| 264 |
atmel,use-dma-tx; |
| 265 |
atmel,fifo-size = <16>; |
| 266 |
status = "disabled"; |
| 267 |
}; |
| 268 |
|
| 269 |
spi5: spi@400 { |
| 270 |
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; |
| 271 |
reg = <0x400 0x200>; |
| 272 |
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; |
| 273 |
#address-cells = <1>; |
| 274 |
#size-cells = <0>; |
| 275 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; |
| 276 |
clock-names = "spi_clk"; |
| 277 |
dmas = <&dma0 |
| 278 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 279 |
AT91_XDMAC_DT_PER_IF(1) | |
| 280 |
AT91_XDMAC_DT_PERID(10))>, |
| 281 |
<&dma0 |
| 282 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 283 |
AT91_XDMAC_DT_PER_IF(1) | |
| 284 |
AT91_XDMAC_DT_PERID(11))>; |
| 285 |
dma-names = "tx", "rx"; |
| 286 |
atmel,fifo-size = <16>; |
| 287 |
status = "disabled"; |
| 288 |
}; |
| 289 |
|
| 290 |
i2c5: i2c@600 { |
| 291 |
compatible = "microchip,sam9x60-i2c"; |
| 292 |
reg = <0x600 0x200>; |
| 293 |
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; |
| 294 |
#address-cells = <1>; |
| 295 |
#size-cells = <0>; |
| 296 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; |
| 297 |
dmas = <&dma0 |
| 298 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 299 |
AT91_XDMAC_DT_PER_IF(1) | |
| 300 |
AT91_XDMAC_DT_PERID(10))>, |
| 301 |
<&dma0 |
| 302 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 303 |
AT91_XDMAC_DT_PER_IF(1) | |
| 304 |
AT91_XDMAC_DT_PERID(11))>; |
| 305 |
dma-names = "tx", "rx"; |
| 306 |
atmel,fifo-size = <16>; |
| 307 |
status = "disabled"; |
| 308 |
}; |
| 309 |
}; |
| 310 |
|
| 311 |
dma0: dma-controller@f0008000 { |
| 312 |
compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma"; |
| 313 |
reg = <0xf0008000 0x1000>; |
| 314 |
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; |
| 315 |
#dma-cells = <1>; |
| 316 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; |
| 317 |
clock-names = "dma_clk"; |
| 318 |
}; |
| 319 |
|
| 320 |
ssc: ssc@f0010000 { |
| 321 |
compatible = "atmel,at91sam9g45-ssc"; |
| 322 |
reg = <0xf0010000 0x4000>; |
| 323 |
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; |
| 324 |
dmas = <&dma0 |
| 325 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 326 |
AT91_XDMAC_DT_PERID(38))>, |
| 327 |
<&dma0 |
| 328 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 329 |
AT91_XDMAC_DT_PERID(39))>; |
| 330 |
dma-names = "tx", "rx"; |
| 331 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; |
| 332 |
clock-names = "pclk"; |
| 333 |
status = "disabled"; |
| 334 |
}; |
| 335 |
|
| 336 |
qspi: spi@f0014000 { |
| 337 |
compatible = "microchip,sam9x60-qspi"; |
| 338 |
reg = <0xf0014000 0x100>, <0x70000000 0x10000000>; |
| 339 |
reg-names = "qspi_base", "qspi_mmap"; |
| 340 |
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>; |
| 341 |
dmas = <&dma0 |
| 342 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 343 |
AT91_XDMAC_DT_PERID(26))>, |
| 344 |
<&dma0 |
| 345 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 346 |
AT91_XDMAC_DT_PERID(27))>; |
| 347 |
dma-names = "tx", "rx"; |
| 348 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>; |
| 349 |
clock-names = "pclk", "qspick"; |
| 350 |
atmel,pmc = <&pmc>; |
| 351 |
#address-cells = <1>; |
| 352 |
#size-cells = <0>; |
| 353 |
status = "disabled"; |
| 354 |
}; |
| 355 |
|
| 356 |
i2s: i2s@f001c000 { |
| 357 |
compatible = "microchip,sam9x60-i2smcc"; |
| 358 |
reg = <0xf001c000 0x100>; |
| 359 |
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; |
| 360 |
dmas = <&dma0 |
| 361 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 362 |
AT91_XDMAC_DT_PERID(36))>, |
| 363 |
<&dma0 |
| 364 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 365 |
AT91_XDMAC_DT_PERID(37))>; |
| 366 |
dma-names = "tx", "rx"; |
| 367 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; |
| 368 |
clock-names = "pclk", "gclk"; |
| 369 |
status = "disabled"; |
| 370 |
}; |
| 371 |
|
| 372 |
flx11: flexcom@f0020000 { |
| 373 |
compatible = "atmel,sama5d2-flexcom"; |
| 374 |
reg = <0xf0020000 0x200>; |
| 375 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; |
| 376 |
#address-cells = <1>; |
| 377 |
#size-cells = <1>; |
| 378 |
ranges = <0x0 0xf0020000 0x800>; |
| 379 |
status = "disabled"; |
| 380 |
|
| 381 |
uart11: serial@200 { |
| 382 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 383 |
reg = <0x200 0x200>; |
| 384 |
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; |
| 385 |
dmas = <&dma0 |
| 386 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 387 |
AT91_XDMAC_DT_PER_IF(1) | |
| 388 |
AT91_XDMAC_DT_PERID(22))>, |
| 389 |
<&dma0 |
| 390 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 391 |
AT91_XDMAC_DT_PER_IF(1) | |
| 392 |
AT91_XDMAC_DT_PERID(23))>; |
| 393 |
dma-names = "tx", "rx"; |
| 394 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; |
| 395 |
clock-names = "usart"; |
| 396 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 397 |
atmel,use-dma-rx; |
| 398 |
atmel,use-dma-tx; |
| 399 |
atmel,fifo-size = <16>; |
| 400 |
status = "disabled"; |
| 401 |
}; |
| 402 |
|
| 403 |
i2c11: i2c@600 { |
| 404 |
compatible = "microchip,sam9x60-i2c"; |
| 405 |
reg = <0x600 0x200>; |
| 406 |
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; |
| 407 |
#address-cells = <1>; |
| 408 |
#size-cells = <0>; |
| 409 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; |
| 410 |
dmas = <&dma0 |
| 411 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 412 |
AT91_XDMAC_DT_PER_IF(1) | |
| 413 |
AT91_XDMAC_DT_PERID(22))>, |
| 414 |
<&dma0 |
| 415 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 416 |
AT91_XDMAC_DT_PER_IF(1) | |
| 417 |
AT91_XDMAC_DT_PERID(23))>; |
| 418 |
dma-names = "tx", "rx"; |
| 419 |
atmel,fifo-size = <16>; |
| 420 |
status = "disabled"; |
| 421 |
}; |
| 422 |
}; |
| 423 |
|
| 424 |
flx12: flexcom@f0024000 { |
| 425 |
compatible = "atmel,sama5d2-flexcom"; |
| 426 |
reg = <0xf0024000 0x200>; |
| 427 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; |
| 428 |
#address-cells = <1>; |
| 429 |
#size-cells = <1>; |
| 430 |
ranges = <0x0 0xf0024000 0x800>; |
| 431 |
status = "disabled"; |
| 432 |
|
| 433 |
uart12: serial@200 { |
| 434 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 435 |
reg = <0x200 0x200>; |
| 436 |
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; |
| 437 |
dmas = <&dma0 |
| 438 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 439 |
AT91_XDMAC_DT_PER_IF(1) | |
| 440 |
AT91_XDMAC_DT_PERID(24))>, |
| 441 |
<&dma0 |
| 442 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 443 |
AT91_XDMAC_DT_PER_IF(1) | |
| 444 |
AT91_XDMAC_DT_PERID(25))>; |
| 445 |
dma-names = "tx", "rx"; |
| 446 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; |
| 447 |
clock-names = "usart"; |
| 448 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 449 |
atmel,use-dma-rx; |
| 450 |
atmel,use-dma-tx; |
| 451 |
atmel,fifo-size = <16>; |
| 452 |
status = "disabled"; |
| 453 |
}; |
| 454 |
|
| 455 |
i2c12: i2c@600 { |
| 456 |
compatible = "microchip,sam9x60-i2c"; |
| 457 |
reg = <0x600 0x200>; |
| 458 |
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; |
| 459 |
#address-cells = <1>; |
| 460 |
#size-cells = <0>; |
| 461 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; |
| 462 |
dmas = <&dma0 |
| 463 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 464 |
AT91_XDMAC_DT_PER_IF(1) | |
| 465 |
AT91_XDMAC_DT_PERID(24))>, |
| 466 |
<&dma0 |
| 467 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 468 |
AT91_XDMAC_DT_PER_IF(1) | |
| 469 |
AT91_XDMAC_DT_PERID(25))>; |
| 470 |
dma-names = "tx", "rx"; |
| 471 |
atmel,fifo-size = <16>; |
| 472 |
status = "disabled"; |
| 473 |
}; |
| 474 |
}; |
| 475 |
|
| 476 |
pit64b: timer@f0028000 { |
| 477 |
compatible = "microchip,sam9x60-pit64b"; |
| 478 |
reg = <0xf0028000 0x100>; |
| 479 |
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; |
| 480 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; |
| 481 |
clock-names = "pclk", "gclk"; |
| 482 |
}; |
| 483 |
|
| 484 |
sha: crypto@f002c000 { |
| 485 |
compatible = "atmel,at91sam9g46-sha"; |
| 486 |
reg = <0xf002c000 0x100>; |
| 487 |
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; |
| 488 |
dmas = <&dma0 |
| 489 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 490 |
AT91_XDMAC_DT_PERID(34))>; |
| 491 |
dma-names = "tx"; |
| 492 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| 493 |
clock-names = "sha_clk"; |
| 494 |
}; |
| 495 |
|
| 496 |
trng: rng@f0030000 { |
| 497 |
compatible = "microchip,sam9x60-trng"; |
| 498 |
reg = <0xf0030000 0x100>; |
| 499 |
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; |
| 500 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| 501 |
}; |
| 502 |
|
| 503 |
aes: crypto@f0034000 { |
| 504 |
compatible = "atmel,at91sam9g46-aes"; |
| 505 |
reg = <0xf0034000 0x100>; |
| 506 |
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; |
| 507 |
dmas = <&dma0 |
| 508 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 509 |
AT91_XDMAC_DT_PERID(32))>, |
| 510 |
<&dma0 |
| 511 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 512 |
AT91_XDMAC_DT_PERID(33))>; |
| 513 |
dma-names = "tx", "rx"; |
| 514 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| 515 |
clock-names = "aes_clk"; |
| 516 |
}; |
| 517 |
|
| 518 |
tdes: crypto@f0038000 { |
| 519 |
compatible = "atmel,at91sam9g46-tdes"; |
| 520 |
reg = <0xf0038000 0x100>; |
| 521 |
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; |
| 522 |
dmas = <&dma0 |
| 523 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 524 |
AT91_XDMAC_DT_PERID(31))>, |
| 525 |
<&dma0 |
| 526 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 527 |
AT91_XDMAC_DT_PERID(30))>; |
| 528 |
dma-names = "tx", "rx"; |
| 529 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; |
| 530 |
clock-names = "tdes_clk"; |
| 531 |
}; |
| 532 |
|
| 533 |
classd: classd@f003c000 { |
| 534 |
compatible = "atmel,sama5d2-classd"; |
| 535 |
reg = <0xf003c000 0x100>; |
| 536 |
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; |
| 537 |
dmas = <&dma0 |
| 538 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 539 |
AT91_XDMAC_DT_PERID(35))>; |
| 540 |
dma-names = "tx"; |
| 541 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; |
| 542 |
clock-names = "pclk", "gclk"; |
| 543 |
status = "disabled"; |
| 544 |
}; |
| 545 |
|
| 546 |
can0: can@f8000000 { |
| 547 |
compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; |
| 548 |
reg = <0xf8000000 0x300>; |
| 549 |
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; |
| 550 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; |
| 551 |
clock-names = "can_clk"; |
| 552 |
status = "disabled"; |
| 553 |
}; |
| 554 |
|
| 555 |
can1: can@f8004000 { |
| 556 |
compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; |
| 557 |
reg = <0xf8004000 0x300>; |
| 558 |
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; |
| 559 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; |
| 560 |
clock-names = "can_clk"; |
| 561 |
status = "disabled"; |
| 562 |
}; |
| 563 |
|
| 564 |
tcb0: timer@f8008000 { |
| 565 |
compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; |
| 566 |
#address-cells = <1>; |
| 567 |
#size-cells = <0>; |
| 568 |
reg = <0xf8008000 0x100>; |
| 569 |
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; |
| 570 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>; |
| 571 |
clock-names = "t0_clk", "slow_clk"; |
| 572 |
}; |
| 573 |
|
| 574 |
tcb1: timer@f800c000 { |
| 575 |
compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; |
| 576 |
#address-cells = <1>; |
| 577 |
#size-cells = <0>; |
| 578 |
reg = <0xf800c000 0x100>; |
| 579 |
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; |
| 580 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>; |
| 581 |
clock-names = "t0_clk", "slow_clk"; |
| 582 |
}; |
| 583 |
|
| 584 |
flx6: flexcom@f8010000 { |
| 585 |
compatible = "atmel,sama5d2-flexcom"; |
| 586 |
reg = <0xf8010000 0x200>; |
| 587 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; |
| 588 |
#address-cells = <1>; |
| 589 |
#size-cells = <1>; |
| 590 |
ranges = <0x0 0xf8010000 0x800>; |
| 591 |
status = "disabled"; |
| 592 |
|
| 593 |
uart6: serial@200 { |
| 594 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 595 |
reg = <0x200 0x200>; |
| 596 |
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; |
| 597 |
dmas = <&dma0 |
| 598 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 599 |
AT91_XDMAC_DT_PER_IF(1) | |
| 600 |
AT91_XDMAC_DT_PERID(12))>, |
| 601 |
<&dma0 |
| 602 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 603 |
AT91_XDMAC_DT_PER_IF(1) | |
| 604 |
AT91_XDMAC_DT_PERID(13))>; |
| 605 |
dma-names = "tx", "rx"; |
| 606 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; |
| 607 |
clock-names = "usart"; |
| 608 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 609 |
atmel,use-dma-rx; |
| 610 |
atmel,use-dma-tx; |
| 611 |
atmel,fifo-size = <16>; |
| 612 |
status = "disabled"; |
| 613 |
}; |
| 614 |
|
| 615 |
i2c6: i2c@600 { |
| 616 |
compatible = "microchip,sam9x60-i2c"; |
| 617 |
reg = <0x600 0x200>; |
| 618 |
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; |
| 619 |
#address-cells = <1>; |
| 620 |
#size-cells = <0>; |
| 621 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; |
| 622 |
dmas = <&dma0 |
| 623 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 624 |
AT91_XDMAC_DT_PER_IF(1) | |
| 625 |
AT91_XDMAC_DT_PERID(12))>, |
| 626 |
<&dma0 |
| 627 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 628 |
AT91_XDMAC_DT_PER_IF(1) | |
| 629 |
AT91_XDMAC_DT_PERID(13))>; |
| 630 |
dma-names = "tx", "rx"; |
| 631 |
atmel,fifo-size = <16>; |
| 632 |
status = "disabled"; |
| 633 |
}; |
| 634 |
}; |
| 635 |
|
| 636 |
flx7: flexcom@f8014000 { |
| 637 |
compatible = "atmel,sama5d2-flexcom"; |
| 638 |
reg = <0xf8014000 0x200>; |
| 639 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; |
| 640 |
#address-cells = <1>; |
| 641 |
#size-cells = <1>; |
| 642 |
ranges = <0x0 0xf8014000 0x800>; |
| 643 |
status = "disabled"; |
| 644 |
|
| 645 |
uart7: serial@200 { |
| 646 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 647 |
reg = <0x200 0x200>; |
| 648 |
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; |
| 649 |
dmas = <&dma0 |
| 650 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 651 |
AT91_XDMAC_DT_PER_IF(1) | |
| 652 |
AT91_XDMAC_DT_PERID(14))>, |
| 653 |
<&dma0 |
| 654 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 655 |
AT91_XDMAC_DT_PER_IF(1) | |
| 656 |
AT91_XDMAC_DT_PERID(15))>; |
| 657 |
dma-names = "tx", "rx"; |
| 658 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; |
| 659 |
clock-names = "usart"; |
| 660 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 661 |
atmel,use-dma-rx; |
| 662 |
atmel,use-dma-tx; |
| 663 |
atmel,fifo-size = <16>; |
| 664 |
status = "disabled"; |
| 665 |
}; |
| 666 |
|
| 667 |
i2c7: i2c@600 { |
| 668 |
compatible = "microchip,sam9x60-i2c"; |
| 669 |
reg = <0x600 0x200>; |
| 670 |
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; |
| 671 |
#address-cells = <1>; |
| 672 |
#size-cells = <0>; |
| 673 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; |
| 674 |
dmas = <&dma0 |
| 675 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 676 |
AT91_XDMAC_DT_PER_IF(1) | |
| 677 |
AT91_XDMAC_DT_PERID(14))>, |
| 678 |
<&dma0 |
| 679 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 680 |
AT91_XDMAC_DT_PER_IF(1) | |
| 681 |
AT91_XDMAC_DT_PERID(15))>; |
| 682 |
dma-names = "tx", "rx"; |
| 683 |
atmel,fifo-size = <16>; |
| 684 |
status = "disabled"; |
| 685 |
}; |
| 686 |
}; |
| 687 |
|
| 688 |
flx8: flexcom@f8018000 { |
| 689 |
compatible = "atmel,sama5d2-flexcom"; |
| 690 |
reg = <0xf8018000 0x200>; |
| 691 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |
| 692 |
#address-cells = <1>; |
| 693 |
#size-cells = <1>; |
| 694 |
ranges = <0x0 0xf8018000 0x800>; |
| 695 |
status = "disabled"; |
| 696 |
|
| 697 |
uart8: serial@200 { |
| 698 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 699 |
reg = <0x200 0x200>; |
| 700 |
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; |
| 701 |
dmas = <&dma0 |
| 702 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 703 |
AT91_XDMAC_DT_PER_IF(1) | |
| 704 |
AT91_XDMAC_DT_PERID(16))>, |
| 705 |
<&dma0 |
| 706 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 707 |
AT91_XDMAC_DT_PER_IF(1) | |
| 708 |
AT91_XDMAC_DT_PERID(17))>; |
| 709 |
dma-names = "tx", "rx"; |
| 710 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |
| 711 |
clock-names = "usart"; |
| 712 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 713 |
atmel,use-dma-rx; |
| 714 |
atmel,use-dma-tx; |
| 715 |
atmel,fifo-size = <16>; |
| 716 |
status = "disabled"; |
| 717 |
}; |
| 718 |
|
| 719 |
i2c8: i2c@600 { |
| 720 |
compatible = "microchip,sam9x60-i2c"; |
| 721 |
reg = <0x600 0x200>; |
| 722 |
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; |
| 723 |
#address-cells = <1>; |
| 724 |
#size-cells = <0>; |
| 725 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |
| 726 |
dmas = <&dma0 |
| 727 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 728 |
AT91_XDMAC_DT_PER_IF(1) | |
| 729 |
AT91_XDMAC_DT_PERID(16))>, |
| 730 |
<&dma0 |
| 731 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 732 |
AT91_XDMAC_DT_PER_IF(1) | |
| 733 |
AT91_XDMAC_DT_PERID(17))>; |
| 734 |
dma-names = "tx", "rx"; |
| 735 |
atmel,fifo-size = <16>; |
| 736 |
status = "disabled"; |
| 737 |
}; |
| 738 |
}; |
| 739 |
|
| 740 |
flx0: flexcom@f801c000 { |
| 741 |
compatible = "atmel,sama5d2-flexcom"; |
| 742 |
reg = <0xf801c000 0x200>; |
| 743 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; |
| 744 |
#address-cells = <1>; |
| 745 |
#size-cells = <1>; |
| 746 |
ranges = <0x0 0xf801c000 0x800>; |
| 747 |
status = "disabled"; |
| 748 |
|
| 749 |
uart0: serial@200 { |
| 750 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 751 |
reg = <0x200 0x200>; |
| 752 |
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; |
| 753 |
dmas = <&dma0 |
| 754 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 755 |
AT91_XDMAC_DT_PER_IF(1) | |
| 756 |
AT91_XDMAC_DT_PERID(0))>, |
| 757 |
<&dma0 |
| 758 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 759 |
AT91_XDMAC_DT_PER_IF(1) | |
| 760 |
AT91_XDMAC_DT_PERID(1))>; |
| 761 |
dma-names = "tx", "rx"; |
| 762 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; |
| 763 |
clock-names = "usart"; |
| 764 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 765 |
atmel,use-dma-rx; |
| 766 |
atmel,use-dma-tx; |
| 767 |
atmel,fifo-size = <16>; |
| 768 |
status = "disabled"; |
| 769 |
}; |
| 770 |
|
| 771 |
spi0: spi@400 { |
| 772 |
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; |
| 773 |
reg = <0x400 0x200>; |
| 774 |
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; |
| 775 |
#address-cells = <1>; |
| 776 |
#size-cells = <0>; |
| 777 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; |
| 778 |
clock-names = "spi_clk"; |
| 779 |
dmas = <&dma0 |
| 780 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 781 |
AT91_XDMAC_DT_PER_IF(1) | |
| 782 |
AT91_XDMAC_DT_PERID(0))>, |
| 783 |
<&dma0 |
| 784 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 785 |
AT91_XDMAC_DT_PER_IF(1) | |
| 786 |
AT91_XDMAC_DT_PERID(1))>; |
| 787 |
dma-names = "tx", "rx"; |
| 788 |
atmel,fifo-size = <16>; |
| 789 |
status = "disabled"; |
| 790 |
}; |
| 791 |
|
| 792 |
i2c0: i2c@600 { |
| 793 |
compatible = "microchip,sam9x60-i2c"; |
| 794 |
reg = <0x600 0x200>; |
| 795 |
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; |
| 796 |
#address-cells = <1>; |
| 797 |
#size-cells = <0>; |
| 798 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; |
| 799 |
dmas = <&dma0 |
| 800 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 801 |
AT91_XDMAC_DT_PER_IF(1) | |
| 802 |
AT91_XDMAC_DT_PERID(0))>, |
| 803 |
<&dma0 |
| 804 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 805 |
AT91_XDMAC_DT_PER_IF(1) | |
| 806 |
AT91_XDMAC_DT_PERID(1))>; |
| 807 |
dma-names = "tx", "rx"; |
| 808 |
atmel,fifo-size = <16>; |
| 809 |
status = "disabled"; |
| 810 |
}; |
| 811 |
}; |
| 812 |
|
| 813 |
flx1: flexcom@f8020000 { |
| 814 |
compatible = "atmel,sama5d2-flexcom"; |
| 815 |
reg = <0xf8020000 0x200>; |
| 816 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; |
| 817 |
#address-cells = <1>; |
| 818 |
#size-cells = <1>; |
| 819 |
ranges = <0x0 0xf8020000 0x800>; |
| 820 |
status = "disabled"; |
| 821 |
|
| 822 |
uart1: serial@200 { |
| 823 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 824 |
reg = <0x200 0x200>; |
| 825 |
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; |
| 826 |
dmas = <&dma0 |
| 827 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 828 |
AT91_XDMAC_DT_PER_IF(1) | |
| 829 |
AT91_XDMAC_DT_PERID(2))>, |
| 830 |
<&dma0 |
| 831 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 832 |
AT91_XDMAC_DT_PER_IF(1) | |
| 833 |
AT91_XDMAC_DT_PERID(3))>; |
| 834 |
dma-names = "tx", "rx"; |
| 835 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; |
| 836 |
clock-names = "usart"; |
| 837 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 838 |
atmel,use-dma-rx; |
| 839 |
atmel,use-dma-tx; |
| 840 |
atmel,fifo-size = <16>; |
| 841 |
status = "disabled"; |
| 842 |
}; |
| 843 |
|
| 844 |
spi1: spi@400 { |
| 845 |
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; |
| 846 |
reg = <0x400 0x200>; |
| 847 |
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; |
| 848 |
#address-cells = <1>; |
| 849 |
#size-cells = <0>; |
| 850 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; |
| 851 |
clock-names = "spi_clk"; |
| 852 |
dmas = <&dma0 |
| 853 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 854 |
AT91_XDMAC_DT_PER_IF(1) | |
| 855 |
AT91_XDMAC_DT_PERID(2))>, |
| 856 |
<&dma0 |
| 857 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 858 |
AT91_XDMAC_DT_PER_IF(1) | |
| 859 |
AT91_XDMAC_DT_PERID(3))>; |
| 860 |
dma-names = "tx", "rx"; |
| 861 |
atmel,fifo-size = <16>; |
| 862 |
status = "disabled"; |
| 863 |
}; |
| 864 |
|
| 865 |
i2c1: i2c@600 { |
| 866 |
compatible = "microchip,sam9x60-i2c"; |
| 867 |
reg = <0x600 0x200>; |
| 868 |
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; |
| 869 |
#address-cells = <1>; |
| 870 |
#size-cells = <0>; |
| 871 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; |
| 872 |
dmas = <&dma0 |
| 873 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 874 |
AT91_XDMAC_DT_PER_IF(1) | |
| 875 |
AT91_XDMAC_DT_PERID(2))>, |
| 876 |
<&dma0 |
| 877 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 878 |
AT91_XDMAC_DT_PER_IF(1) | |
| 879 |
AT91_XDMAC_DT_PERID(3))>; |
| 880 |
dma-names = "tx", "rx"; |
| 881 |
atmel,fifo-size = <16>; |
| 882 |
status = "disabled"; |
| 883 |
}; |
| 884 |
}; |
| 885 |
|
| 886 |
flx2: flexcom@f8024000 { |
| 887 |
compatible = "atmel,sama5d2-flexcom"; |
| 888 |
reg = <0xf8024000 0x200>; |
| 889 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; |
| 890 |
#address-cells = <1>; |
| 891 |
#size-cells = <1>; |
| 892 |
ranges = <0x0 0xf8024000 0x800>; |
| 893 |
status = "disabled"; |
| 894 |
|
| 895 |
uart2: serial@200 { |
| 896 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 897 |
reg = <0x200 0x200>; |
| 898 |
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; |
| 899 |
dmas = <&dma0 |
| 900 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 901 |
AT91_XDMAC_DT_PER_IF(1) | |
| 902 |
AT91_XDMAC_DT_PERID(4))>, |
| 903 |
<&dma0 |
| 904 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 905 |
AT91_XDMAC_DT_PER_IF(1) | |
| 906 |
AT91_XDMAC_DT_PERID(5))>; |
| 907 |
dma-names = "tx", "rx"; |
| 908 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; |
| 909 |
clock-names = "usart"; |
| 910 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 911 |
atmel,use-dma-rx; |
| 912 |
atmel,use-dma-tx; |
| 913 |
atmel,fifo-size = <16>; |
| 914 |
status = "disabled"; |
| 915 |
}; |
| 916 |
|
| 917 |
spi2: spi@400 { |
| 918 |
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; |
| 919 |
reg = <0x400 0x200>; |
| 920 |
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; |
| 921 |
#address-cells = <1>; |
| 922 |
#size-cells = <0>; |
| 923 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; |
| 924 |
clock-names = "spi_clk"; |
| 925 |
dmas = <&dma0 |
| 926 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 927 |
AT91_XDMAC_DT_PER_IF(1) | |
| 928 |
AT91_XDMAC_DT_PERID(4))>, |
| 929 |
<&dma0 |
| 930 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 931 |
AT91_XDMAC_DT_PER_IF(1) | |
| 932 |
AT91_XDMAC_DT_PERID(5))>; |
| 933 |
dma-names = "tx", "rx"; |
| 934 |
atmel,fifo-size = <16>; |
| 935 |
status = "disabled"; |
| 936 |
}; |
| 937 |
|
| 938 |
i2c2: i2c@600 { |
| 939 |
compatible = "microchip,sam9x60-i2c"; |
| 940 |
reg = <0x600 0x200>; |
| 941 |
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; |
| 942 |
#address-cells = <1>; |
| 943 |
#size-cells = <0>; |
| 944 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; |
| 945 |
dmas = <&dma0 |
| 946 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 947 |
AT91_XDMAC_DT_PER_IF(1) | |
| 948 |
AT91_XDMAC_DT_PERID(4))>, |
| 949 |
<&dma0 |
| 950 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 951 |
AT91_XDMAC_DT_PER_IF(1) | |
| 952 |
AT91_XDMAC_DT_PERID(5))>; |
| 953 |
dma-names = "tx", "rx"; |
| 954 |
atmel,fifo-size = <16>; |
| 955 |
status = "disabled"; |
| 956 |
}; |
| 957 |
}; |
| 958 |
|
| 959 |
flx3: flexcom@f8028000 { |
| 960 |
compatible = "atmel,sama5d2-flexcom"; |
| 961 |
reg = <0xf8028000 0x200>; |
| 962 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; |
| 963 |
#address-cells = <1>; |
| 964 |
#size-cells = <1>; |
| 965 |
ranges = <0x0 0xf8028000 0x800>; |
| 966 |
status = "disabled"; |
| 967 |
|
| 968 |
uart3: serial@200 { |
| 969 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 970 |
reg = <0x200 0x200>; |
| 971 |
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; |
| 972 |
dmas = <&dma0 |
| 973 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 974 |
AT91_XDMAC_DT_PER_IF(1) | |
| 975 |
AT91_XDMAC_DT_PERID(6))>, |
| 976 |
<&dma0 |
| 977 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 978 |
AT91_XDMAC_DT_PER_IF(1) | |
| 979 |
AT91_XDMAC_DT_PERID(7))>; |
| 980 |
dma-names = "tx", "rx"; |
| 981 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; |
| 982 |
clock-names = "usart"; |
| 983 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 984 |
atmel,use-dma-rx; |
| 985 |
atmel,use-dma-tx; |
| 986 |
atmel,fifo-size = <16>; |
| 987 |
status = "disabled"; |
| 988 |
}; |
| 989 |
|
| 990 |
spi3: spi@400 { |
| 991 |
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; |
| 992 |
reg = <0x400 0x200>; |
| 993 |
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; |
| 994 |
#address-cells = <1>; |
| 995 |
#size-cells = <0>; |
| 996 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; |
| 997 |
clock-names = "spi_clk"; |
| 998 |
dmas = <&dma0 |
| 999 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1000 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1001 |
AT91_XDMAC_DT_PERID(6))>, |
| 1002 |
<&dma0 |
| 1003 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1004 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1005 |
AT91_XDMAC_DT_PERID(7))>; |
| 1006 |
dma-names = "tx", "rx"; |
| 1007 |
atmel,fifo-size = <16>; |
| 1008 |
status = "disabled"; |
| 1009 |
}; |
| 1010 |
|
| 1011 |
i2c3: i2c@600 { |
| 1012 |
compatible = "microchip,sam9x60-i2c"; |
| 1013 |
reg = <0x600 0x200>; |
| 1014 |
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1015 |
#address-cells = <1>; |
| 1016 |
#size-cells = <0>; |
| 1017 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; |
| 1018 |
dmas = <&dma0 |
| 1019 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1020 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1021 |
AT91_XDMAC_DT_PERID(6))>, |
| 1022 |
<&dma0 |
| 1023 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1024 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1025 |
AT91_XDMAC_DT_PERID(7))>; |
| 1026 |
dma-names = "tx", "rx"; |
| 1027 |
atmel,fifo-size = <16>; |
| 1028 |
status = "disabled"; |
| 1029 |
}; |
| 1030 |
}; |
| 1031 |
|
| 1032 |
macb0: ethernet@f802c000 { |
| 1033 |
compatible = "cdns,sam9x60-macb", "cdns,macb"; |
| 1034 |
reg = <0xf802c000 0x1000>; |
| 1035 |
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; |
| 1036 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; |
| 1037 |
clock-names = "hclk", "pclk"; |
| 1038 |
status = "disabled"; |
| 1039 |
}; |
| 1040 |
|
| 1041 |
macb1: ethernet@f8030000 { |
| 1042 |
compatible = "cdns,sam9x60-macb", "cdns,macb"; |
| 1043 |
reg = <0xf8030000 0x1000>; |
| 1044 |
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; |
| 1045 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>; |
| 1046 |
clock-names = "hclk", "pclk"; |
| 1047 |
status = "disabled"; |
| 1048 |
}; |
| 1049 |
|
| 1050 |
pwm0: pwm@f8034000 { |
| 1051 |
compatible = "microchip,sam9x60-pwm"; |
| 1052 |
reg = <0xf8034000 0x300>; |
| 1053 |
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; |
| 1054 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; |
| 1055 |
#pwm-cells = <3>; |
| 1056 |
status = "disabled"; |
| 1057 |
}; |
| 1058 |
|
| 1059 |
hlcdc: hlcdc@f8038000 { |
| 1060 |
compatible = "microchip,sam9x60-hlcdc"; |
| 1061 |
reg = <0xf8038000 0x4000>; |
| 1062 |
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; |
| 1063 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>; |
| 1064 |
clock-names = "periph_clk","sys_clk", "slow_clk"; |
| 1065 |
assigned-clocks = <&pmc PMC_TYPE_GCK 25>; |
| 1066 |
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>; |
| 1067 |
status = "disabled"; |
| 1068 |
|
| 1069 |
hlcdc-display-controller { |
| 1070 |
compatible = "atmel,hlcdc-display-controller"; |
| 1071 |
#address-cells = <1>; |
| 1072 |
#size-cells = <0>; |
| 1073 |
|
| 1074 |
port@0 { |
| 1075 |
#address-cells = <1>; |
| 1076 |
#size-cells = <0>; |
| 1077 |
reg = <0>; |
| 1078 |
}; |
| 1079 |
}; |
| 1080 |
|
| 1081 |
hlcdc_pwm: hlcdc-pwm { |
| 1082 |
compatible = "atmel,hlcdc-pwm"; |
| 1083 |
#pwm-cells = <3>; |
| 1084 |
}; |
| 1085 |
}; |
| 1086 |
|
| 1087 |
flx9: flexcom@f8040000 { |
| 1088 |
compatible = "atmel,sama5d2-flexcom"; |
| 1089 |
reg = <0xf8040000 0x200>; |
| 1090 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; |
| 1091 |
#address-cells = <1>; |
| 1092 |
#size-cells = <1>; |
| 1093 |
ranges = <0x0 0xf8040000 0x800>; |
| 1094 |
status = "disabled"; |
| 1095 |
|
| 1096 |
uart9: serial@200 { |
| 1097 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 1098 |
reg = <0x200 0x200>; |
| 1099 |
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1100 |
dmas = <&dma0 |
| 1101 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1102 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1103 |
AT91_XDMAC_DT_PERID(18))>, |
| 1104 |
<&dma0 |
| 1105 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1106 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1107 |
AT91_XDMAC_DT_PERID(19))>; |
| 1108 |
dma-names = "tx", "rx"; |
| 1109 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; |
| 1110 |
clock-names = "usart"; |
| 1111 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 1112 |
atmel,use-dma-rx; |
| 1113 |
atmel,use-dma-tx; |
| 1114 |
atmel,fifo-size = <16>; |
| 1115 |
status = "disabled"; |
| 1116 |
}; |
| 1117 |
|
| 1118 |
i2c9: i2c@600 { |
| 1119 |
compatible = "microchip,sam9x60-i2c"; |
| 1120 |
reg = <0x600 0x200>; |
| 1121 |
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1122 |
#address-cells = <1>; |
| 1123 |
#size-cells = <0>; |
| 1124 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; |
| 1125 |
dmas = <&dma0 |
| 1126 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1127 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1128 |
AT91_XDMAC_DT_PERID(18))>, |
| 1129 |
<&dma0 |
| 1130 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1131 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1132 |
AT91_XDMAC_DT_PERID(19))>; |
| 1133 |
dma-names = "tx", "rx"; |
| 1134 |
atmel,fifo-size = <16>; |
| 1135 |
status = "disabled"; |
| 1136 |
}; |
| 1137 |
}; |
| 1138 |
|
| 1139 |
flx10: flexcom@f8044000 { |
| 1140 |
compatible = "atmel,sama5d2-flexcom"; |
| 1141 |
reg = <0xf8044000 0x200>; |
| 1142 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; |
| 1143 |
#address-cells = <1>; |
| 1144 |
#size-cells = <1>; |
| 1145 |
ranges = <0x0 0xf8044000 0x800>; |
| 1146 |
status = "disabled"; |
| 1147 |
|
| 1148 |
uart10: serial@200 { |
| 1149 |
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; |
| 1150 |
reg = <0x200 0x200>; |
| 1151 |
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1152 |
dmas = <&dma0 |
| 1153 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1154 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1155 |
AT91_XDMAC_DT_PERID(20))>, |
| 1156 |
<&dma0 |
| 1157 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1158 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1159 |
AT91_XDMAC_DT_PERID(21))>; |
| 1160 |
dma-names = "tx", "rx"; |
| 1161 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; |
| 1162 |
clock-names = "usart"; |
| 1163 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 1164 |
atmel,use-dma-rx; |
| 1165 |
atmel,use-dma-tx; |
| 1166 |
atmel,fifo-size = <16>; |
| 1167 |
status = "disabled"; |
| 1168 |
}; |
| 1169 |
|
| 1170 |
i2c10: i2c@600 { |
| 1171 |
compatible = "microchip,sam9x60-i2c"; |
| 1172 |
reg = <0x600 0x200>; |
| 1173 |
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1174 |
#address-cells = <1>; |
| 1175 |
#size-cells = <0>; |
| 1176 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; |
| 1177 |
dmas = <&dma0 |
| 1178 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1179 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1180 |
AT91_XDMAC_DT_PERID(20))>, |
| 1181 |
<&dma0 |
| 1182 |
(AT91_XDMAC_DT_MEM_IF(0) | |
| 1183 |
AT91_XDMAC_DT_PER_IF(1) | |
| 1184 |
AT91_XDMAC_DT_PERID(21))>; |
| 1185 |
dma-names = "tx", "rx"; |
| 1186 |
atmel,fifo-size = <16>; |
| 1187 |
status = "disabled"; |
| 1188 |
}; |
| 1189 |
}; |
| 1190 |
|
| 1191 |
isi: isi@f8048000 { |
| 1192 |
compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi"; |
| 1193 |
reg = <0xf8048000 0x100>; |
| 1194 |
interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1195 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; |
| 1196 |
clock-names = "isi_clk"; |
| 1197 |
status = "disabled"; |
| 1198 |
port { |
| 1199 |
#address-cells = <1>; |
| 1200 |
#size-cells = <0>; |
| 1201 |
}; |
| 1202 |
}; |
| 1203 |
|
| 1204 |
adc: adc@f804c000 { |
| 1205 |
compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc"; |
| 1206 |
reg = <0xf804c000 0x100>; |
| 1207 |
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1208 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; |
| 1209 |
clock-names = "adc_clk"; |
| 1210 |
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; |
| 1211 |
dma-names = "rx"; |
| 1212 |
atmel,min-sample-rate-hz = <200000>; |
| 1213 |
atmel,max-sample-rate-hz = <20000000>; |
| 1214 |
atmel,startup-time-ms = <4>; |
| 1215 |
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; |
| 1216 |
#io-channel-cells = <1>; |
| 1217 |
status = "disabled"; |
| 1218 |
}; |
| 1219 |
|
| 1220 |
sfr: sfr@f8050000 { |
| 1221 |
compatible = "microchip,sam9x60-sfr", "syscon"; |
| 1222 |
reg = <0xf8050000 0x100>; |
| 1223 |
}; |
| 1224 |
|
| 1225 |
matrix: matrix@ffffde00 { |
| 1226 |
compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon"; |
| 1227 |
reg = <0xffffde00 0x200>; |
| 1228 |
}; |
| 1229 |
|
| 1230 |
pmecc: ecc-engine@ffffe000 { |
| 1231 |
compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; |
| 1232 |
reg = <0xffffe000 0x300>, |
| 1233 |
<0xffffe600 0x100>; |
| 1234 |
}; |
| 1235 |
|
| 1236 |
mpddrc: mpddrc@ffffe800 { |
| 1237 |
compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; |
| 1238 |
reg = <0xffffe800 0x200>; |
| 1239 |
clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; |
| 1240 |
clock-names = "ddrck", "mpddr"; |
| 1241 |
}; |
| 1242 |
|
| 1243 |
smc: smc@ffffea00 { |
| 1244 |
compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; |
| 1245 |
reg = <0xffffea00 0x100>; |
| 1246 |
}; |
| 1247 |
|
| 1248 |
aic: interrupt-controller@fffff100 { |
| 1249 |
compatible = "microchip,sam9x60-aic"; |
| 1250 |
#interrupt-cells = <3>; |
| 1251 |
interrupt-controller; |
| 1252 |
reg = <0xfffff100 0x100>; |
| 1253 |
atmel,external-irqs = <31>; |
| 1254 |
}; |
| 1255 |
|
| 1256 |
dbgu: serial@fffff200 { |
| 1257 |
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; |
| 1258 |
reg = <0xfffff200 0x200>; |
| 1259 |
atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 1260 |
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1261 |
dmas = <&dma0 |
| 1262 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 1263 |
AT91_XDMAC_DT_PERID(28))>, |
| 1264 |
<&dma0 |
| 1265 |
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| 1266 |
AT91_XDMAC_DT_PERID(29))>; |
| 1267 |
dma-names = "tx", "rx"; |
| 1268 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; |
| 1269 |
clock-names = "usart"; |
| 1270 |
status = "disabled"; |
| 1271 |
}; |
| 1272 |
|
| 1273 |
pinctrl: pinctrl@fffff400 { |
| 1274 |
#address-cells = <1>; |
| 1275 |
#size-cells = <1>; |
| 1276 |
compatible = "microchip,sam9x60-pinctrl", "simple-mfd"; |
| 1277 |
ranges = <0xfffff400 0xfffff400 0x800>; |
| 1278 |
|
| 1279 |
/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ |
| 1280 |
atmel,mux-mask = < |
| 1281 |
/* A B C */ |
| 1282 |
0xffffffff 0xffe03fff 0xef00019d /* pioA */ |
| 1283 |
0x03ffffff 0x02fc7e7f 0x00780000 /* pioB */ |
| 1284 |
0xffffffff 0xffffffff 0xf83fffff /* pioC */ |
| 1285 |
0x003fffff 0x003f8000 0x00000000 /* pioD */ |
| 1286 |
>; |
| 1287 |
|
| 1288 |
pioA: gpio@fffff400 { |
| 1289 |
compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; |
| 1290 |
reg = <0xfffff400 0x200>; |
| 1291 |
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; |
| 1292 |
#gpio-cells = <2>; |
| 1293 |
gpio-controller; |
| 1294 |
interrupt-controller; |
| 1295 |
#interrupt-cells = <2>; |
| 1296 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; |
| 1297 |
}; |
| 1298 |
|
| 1299 |
pioB: gpio@fffff600 { |
| 1300 |
compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; |
| 1301 |
reg = <0xfffff600 0x200>; |
| 1302 |
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; |
| 1303 |
#gpio-cells = <2>; |
| 1304 |
gpio-controller; |
| 1305 |
#gpio-lines = <26>; |
| 1306 |
interrupt-controller; |
| 1307 |
#interrupt-cells = <2>; |
| 1308 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; |
| 1309 |
}; |
| 1310 |
|
| 1311 |
pioC: gpio@fffff800 { |
| 1312 |
compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; |
| 1313 |
reg = <0xfffff800 0x200>; |
| 1314 |
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; |
| 1315 |
#gpio-cells = <2>; |
| 1316 |
gpio-controller; |
| 1317 |
interrupt-controller; |
| 1318 |
#interrupt-cells = <2>; |
| 1319 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; |
| 1320 |
}; |
| 1321 |
|
| 1322 |
pioD: gpio@fffffa00 { |
| 1323 |
compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; |
| 1324 |
reg = <0xfffffa00 0x200>; |
| 1325 |
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; |
| 1326 |
#gpio-cells = <2>; |
| 1327 |
gpio-controller; |
| 1328 |
#gpio-lines = <22>; |
| 1329 |
interrupt-controller; |
| 1330 |
#interrupt-cells = <2>; |
| 1331 |
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| 1332 |
}; |
| 1333 |
}; |
| 1334 |
|
| 1335 |
pmc: clock-controller@fffffc00 { |
| 1336 |
compatible = "microchip,sam9x60-pmc", "syscon"; |
| 1337 |
reg = <0xfffffc00 0x200>; |
| 1338 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1339 |
#clock-cells = <2>; |
| 1340 |
clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; |
| 1341 |
clock-names = "td_slck", "md_slck", "main_xtal"; |
| 1342 |
}; |
| 1343 |
|
| 1344 |
reset_controller: reset-controller@fffffe00 { |
| 1345 |
compatible = "microchip,sam9x60-rstc"; |
| 1346 |
reg = <0xfffffe00 0x10>; |
| 1347 |
clocks = <&clk32k 0>; |
| 1348 |
}; |
| 1349 |
|
| 1350 |
shutdown_controller: poweroff@fffffe10 { |
| 1351 |
compatible = "microchip,sam9x60-shdwc"; |
| 1352 |
reg = <0xfffffe10 0x10>; |
| 1353 |
clocks = <&clk32k 0>; |
| 1354 |
#address-cells = <1>; |
| 1355 |
#size-cells = <0>; |
| 1356 |
atmel,wakeup-rtc-timer; |
| 1357 |
atmel,wakeup-rtt-timer; |
| 1358 |
status = "disabled"; |
| 1359 |
}; |
| 1360 |
|
| 1361 |
rtt: rtc@fffffe20 { |
| 1362 |
compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; |
| 1363 |
reg = <0xfffffe20 0x20>; |
| 1364 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1365 |
clocks = <&clk32k 1>; |
| 1366 |
}; |
| 1367 |
|
| 1368 |
pit: timer@fffffe40 { |
| 1369 |
compatible = "atmel,at91sam9260-pit"; |
| 1370 |
reg = <0xfffffe40 0x10>; |
| 1371 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1372 |
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; |
| 1373 |
}; |
| 1374 |
|
| 1375 |
clk32k: clock-controller@fffffe50 { |
| 1376 |
compatible = "microchip,sam9x60-sckc"; |
| 1377 |
reg = <0xfffffe50 0x4>; |
| 1378 |
clocks = <&slow_xtal>; |
| 1379 |
#clock-cells = <1>; |
| 1380 |
}; |
| 1381 |
|
| 1382 |
gpbr: syscon@fffffe60 { |
| 1383 |
compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon"; |
| 1384 |
reg = <0xfffffe60 0x10>; |
| 1385 |
}; |
| 1386 |
|
| 1387 |
rtc: rtc@fffffea8 { |
| 1388 |
compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; |
| 1389 |
reg = <0xfffffea8 0x100>; |
| 1390 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1391 |
clocks = <&clk32k 1>; |
| 1392 |
}; |
| 1393 |
|
| 1394 |
watchdog: watchdog@ffffff80 { |
| 1395 |
compatible = "microchip,sam9x60-wdt"; |
| 1396 |
reg = <0xffffff80 0x24>; |
| 1397 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1398 |
clocks = <&clk32k 0>; |
| 1399 |
status = "disabled"; |
| 1400 |
}; |
| 1401 |
}; |
| 1402 |
}; |
| 1403 |
}; |