| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board |
| 4 |
* |
| 5 |
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries |
| 6 |
* |
| 7 |
* Author: Radu Pirea & Razvan Stefanescu, |
| 8 |
* Codrin Ciubotariu <[email protected]>, |
| 9 |
* Cristian Birsan <[email protected]> |
| 10 |
*/ |
| 11 |
/dts-v1/; |
| 12 |
#include "sama5d2.dtsi" |
| 13 |
#include "sama5d2-pinfunc.h" |
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
#include <dt-bindings/input/input.h> |
| 16 |
#include <dt-bindings/mfd/atmel-flexcom.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Microchip SAMA5D2-ICP"; |
| 20 |
compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
serial0 = &uart0; /* debug uart0 + mikro BUS 1 */ |
| 24 |
serial1 = &uart1; /* mikro BUS 3 */ |
| 25 |
serial3 = &uart3; /* mikro BUS 2 */ |
| 26 |
serial5 = &uart7; /* flx2 */ |
| 27 |
i2c0 = &i2c0; |
| 28 |
i2c1 = &i2c1; |
| 29 |
}; |
| 30 |
|
| 31 |
chosen { |
| 32 |
stdout-path = "serial0:115200n8"; |
| 33 |
}; |
| 34 |
|
| 35 |
clocks { |
| 36 |
slow_xtal { |
| 37 |
clock-frequency = <32768>; |
| 38 |
}; |
| 39 |
|
| 40 |
main_xtal { |
| 41 |
clock-frequency = <12000000>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
gpio-keys { |
| 46 |
compatible = "gpio-keys"; |
| 47 |
|
| 48 |
pinctrl-names = "default"; |
| 49 |
pinctrl-0 = <&pinctrl_key_gpio_default>; |
| 50 |
|
| 51 |
button-1 { |
| 52 |
label = "USER_PB1"; |
| 53 |
gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; |
| 54 |
linux,code = <KEY_PROG1>; |
| 55 |
wakeup-source; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
leds { |
| 60 |
compatible = "gpio-leds"; |
| 61 |
pinctrl-names = "default"; |
| 62 |
pinctrl-0 = <&pinctrl_led_gpio_default>; |
| 63 |
status = "okay"; /* conflict with pwm0 */ |
| 64 |
|
| 65 |
led-red { |
| 66 |
label = "red"; |
| 67 |
gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>; |
| 68 |
}; |
| 69 |
|
| 70 |
led-green { |
| 71 |
label = "green"; |
| 72 |
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; |
| 73 |
}; |
| 74 |
|
| 75 |
led-blue { |
| 76 |
label = "blue"; |
| 77 |
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; |
| 78 |
linux,default-trigger = "heartbeat"; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
reg_5v: regulator-5v { |
| 83 |
compatible = "regulator-fixed"; |
| 84 |
regulator-name = "VDD_MAIN_5V"; |
| 85 |
regulator-min-microvolt = <5000000>; |
| 86 |
regulator-max-microvolt = <5000000>; |
| 87 |
regulator-always-on; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
&adc { |
| 92 |
vddana-supply = <&vdd_io_reg>; |
| 93 |
vref-supply = <&vdd_io_reg>; |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; |
| 96 |
status = "okay"; |
| 97 |
}; |
| 98 |
|
| 99 |
&can0 { |
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&pinctrl_can0_default>; |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
&can1 { |
| 106 |
pinctrl-names = "default"; |
| 107 |
pinctrl-0 = <&pinctrl_can1_default>; |
| 108 |
status = "okay"; |
| 109 |
}; |
| 110 |
|
| 111 |
&flx0 { /* mikrobus2 spi */ |
| 112 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; |
| 113 |
status = "okay"; |
| 114 |
|
| 115 |
spi2: spi@400 { |
| 116 |
dmas = <0>, <0>; |
| 117 |
cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; |
| 118 |
pinctrl-names = "default"; |
| 119 |
pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>; |
| 120 |
status = "okay"; |
| 121 |
#address-cells = <1>; |
| 122 |
#size-cells = <0>; |
| 123 |
|
| 124 |
switch0: ksz8563@0 { |
| 125 |
compatible = "microchip,ksz8563"; |
| 126 |
reg = <0>; |
| 127 |
reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>; |
| 128 |
|
| 129 |
spi-max-frequency = <500000>; |
| 130 |
spi-cpha; |
| 131 |
spi-cpol; |
| 132 |
|
| 133 |
ports { |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <0>; |
| 136 |
port@0 { |
| 137 |
reg = <0>; |
| 138 |
label = "lan1"; |
| 139 |
}; |
| 140 |
|
| 141 |
port@1 { |
| 142 |
reg = <1>; |
| 143 |
label = "lan2"; |
| 144 |
}; |
| 145 |
|
| 146 |
port@2 { |
| 147 |
reg = <2>; |
| 148 |
label = "cpu"; |
| 149 |
ethernet = <&macb0>; |
| 150 |
phy-mode = "mii"; |
| 151 |
fixed-link { |
| 152 |
speed = <100>; |
| 153 |
full-duplex; |
| 154 |
}; |
| 155 |
}; |
| 156 |
}; |
| 157 |
}; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
&flx2 { |
| 162 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; |
| 163 |
status = "okay"; |
| 164 |
|
| 165 |
uart7: serial@200 { |
| 166 |
pinctrl-0 = <&pinctrl_flx2_default>; |
| 167 |
pinctrl-names = "default"; |
| 168 |
atmel,use-dma-rx; |
| 169 |
atmel,use-dma-tx; |
| 170 |
status = "okay"; /* Conflict w/ qspi1. */ |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
&flx3 { /* mikrobus1 spi */ |
| 175 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; |
| 176 |
status = "okay"; |
| 177 |
|
| 178 |
spi5: spi@400 { |
| 179 |
dmas = <0>, <0>; |
| 180 |
pinctrl-names = "default"; |
| 181 |
pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>; |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
&flx4 { |
| 187 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; |
| 188 |
status = "okay"; |
| 189 |
|
| 190 |
i2c6: i2c@600 { |
| 191 |
dmas = <0>, <0>; |
| 192 |
pinctrl-names = "default"; |
| 193 |
pinctrl-0 = <&pinctrl_flx4_default>; |
| 194 |
i2c-digital-filter; |
| 195 |
i2c-digital-filter-width-ns = <35>; |
| 196 |
status = "okay"; |
| 197 |
|
| 198 |
power-monitor@10 { |
| 199 |
compatible = "microchip,pac1934"; |
| 200 |
reg = <0x10>; |
| 201 |
#address-cells = <1>; |
| 202 |
#size-cells = <0>; |
| 203 |
|
| 204 |
channel@1 { |
| 205 |
reg = <0x1>; |
| 206 |
shunt-resistor-micro-ohms = <10000>; |
| 207 |
label = "VDD3V3_1"; |
| 208 |
}; |
| 209 |
|
| 210 |
channel@2 { |
| 211 |
reg = <0x2>; |
| 212 |
shunt-resistor-micro-ohms = <10000>; |
| 213 |
label = "VDD3V3_2"; |
| 214 |
}; |
| 215 |
|
| 216 |
channel@3 { |
| 217 |
reg = <0x3>; |
| 218 |
shunt-resistor-micro-ohms = <10000>; |
| 219 |
label = "VDDCORE"; |
| 220 |
}; |
| 221 |
|
| 222 |
channel@4 { |
| 223 |
reg = <0x4>; |
| 224 |
shunt-resistor-micro-ohms = <10000>; |
| 225 |
label = "VDDIODDR"; |
| 226 |
}; |
| 227 |
}; |
| 228 |
|
| 229 |
pmic@5b { |
| 230 |
compatible = "microchip,mcp16502"; |
| 231 |
reg = <0x5b>; |
| 232 |
lvin-supply = <®_5v>; |
| 233 |
pvin1-supply = <®_5v>; |
| 234 |
pvin2-supply = <®_5v>; |
| 235 |
pvin3-supply = <®_5v>; |
| 236 |
pvin4-supply = <®_5v>; |
| 237 |
status = "okay"; |
| 238 |
lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>; |
| 239 |
|
| 240 |
regulators { |
| 241 |
vdd_io_reg: VDD_IO { |
| 242 |
regulator-name = "VDD_IO"; |
| 243 |
regulator-min-microvolt = <3300000>; |
| 244 |
regulator-max-microvolt = <3300000>; |
| 245 |
regulator-initial-mode = <2>; |
| 246 |
regulator-allowed-modes = <2>, <4>; |
| 247 |
regulator-always-on; |
| 248 |
|
| 249 |
regulator-state-standby { |
| 250 |
regulator-on-in-suspend; |
| 251 |
regulator-mode = <4>; |
| 252 |
}; |
| 253 |
|
| 254 |
regulator-state-mem { |
| 255 |
regulator-off-in-suspend; |
| 256 |
regulator-mode = <4>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
VDD_DDR { |
| 261 |
regulator-name = "VDD_DDR"; |
| 262 |
regulator-min-microvolt = <1350000>; |
| 263 |
regulator-max-microvolt = <1350000>; |
| 264 |
regulator-initial-mode = <2>; |
| 265 |
regulator-allowed-modes = <2>, <4>; |
| 266 |
regulator-always-on; |
| 267 |
|
| 268 |
regulator-state-standby { |
| 269 |
regulator-on-in-suspend; |
| 270 |
regulator-mode = <4>; |
| 271 |
}; |
| 272 |
|
| 273 |
regulator-state-mem { |
| 274 |
regulator-on-in-suspend; |
| 275 |
regulator-mode = <4>; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
VDD_CORE { |
| 280 |
regulator-name = "VDD_CORE"; |
| 281 |
regulator-min-microvolt = <1250000>; |
| 282 |
regulator-max-microvolt = <1250000>; |
| 283 |
regulator-initial-mode = <2>; |
| 284 |
regulator-allowed-modes = <2>, <4>; |
| 285 |
regulator-always-on; |
| 286 |
|
| 287 |
regulator-state-standby { |
| 288 |
regulator-on-in-suspend; |
| 289 |
regulator-mode = <4>; |
| 290 |
}; |
| 291 |
|
| 292 |
regulator-state-mem { |
| 293 |
regulator-off-in-suspend; |
| 294 |
regulator-mode = <4>; |
| 295 |
}; |
| 296 |
}; |
| 297 |
|
| 298 |
VDD_OTHER { |
| 299 |
regulator-name = "VDD_OTHER"; |
| 300 |
regulator-min-microvolt = <600000>; |
| 301 |
regulator-max-microvolt = <1850000>; |
| 302 |
regulator-initial-mode = <2>; |
| 303 |
regulator-allowed-modes = <2>, <4>; |
| 304 |
|
| 305 |
regulator-state-standby { |
| 306 |
regulator-on-in-suspend; |
| 307 |
regulator-mode = <4>; |
| 308 |
}; |
| 309 |
|
| 310 |
regulator-state-mem { |
| 311 |
regulator-off-in-suspend; |
| 312 |
regulator-mode = <4>; |
| 313 |
}; |
| 314 |
}; |
| 315 |
|
| 316 |
LDO1 { |
| 317 |
regulator-name = "LDO1"; |
| 318 |
regulator-min-microvolt = <2500000>; |
| 319 |
regulator-max-microvolt = <2500000>; |
| 320 |
regulator-always-on; |
| 321 |
|
| 322 |
regulator-state-standby { |
| 323 |
regulator-on-in-suspend; |
| 324 |
}; |
| 325 |
|
| 326 |
regulator-state-mem { |
| 327 |
regulator-off-in-suspend; |
| 328 |
}; |
| 329 |
}; |
| 330 |
|
| 331 |
LDO2 { |
| 332 |
regulator-name = "LDO2"; |
| 333 |
regulator-min-microvolt = <3300000>; |
| 334 |
regulator-max-microvolt = <3300000>; |
| 335 |
regulator-always-on; |
| 336 |
|
| 337 |
regulator-state-standby { |
| 338 |
regulator-on-in-suspend; |
| 339 |
}; |
| 340 |
|
| 341 |
regulator-state-mem { |
| 342 |
regulator-off-in-suspend; |
| 343 |
}; |
| 344 |
}; |
| 345 |
|
| 346 |
}; |
| 347 |
}; |
| 348 |
}; |
| 349 |
}; |
| 350 |
|
| 351 |
&i2c0 { /* mikrobus i2c */ |
| 352 |
pinctrl-names = "default", "gpio"; |
| 353 |
pinctrl-0 = <&pinctrl_mikrobus_i2c>; |
| 354 |
pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| 355 |
sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; |
| 356 |
scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 357 |
i2c-digital-filter; |
| 358 |
i2c-digital-filter-width-ns = <35>; |
| 359 |
status = "okay"; |
| 360 |
}; |
| 361 |
|
| 362 |
&i2c1 { |
| 363 |
dmas = <0>, <0>; |
| 364 |
pinctrl-names = "default", "gpio"; |
| 365 |
pinctrl-0 = <&pinctrl_i2c1_default>; |
| 366 |
pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| 367 |
sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>; |
| 368 |
scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 369 |
i2c-digital-filter; |
| 370 |
i2c-digital-filter-width-ns = <35>; |
| 371 |
status = "okay"; |
| 372 |
|
| 373 |
eeprom@50 { |
| 374 |
compatible = "atmel,24c02"; |
| 375 |
reg = <0x50>; |
| 376 |
pagesize = <16>; |
| 377 |
status = "okay"; |
| 378 |
}; |
| 379 |
|
| 380 |
eeprom@52 { |
| 381 |
compatible = "atmel,24c02"; |
| 382 |
reg = <0x52>; |
| 383 |
pagesize = <16>; |
| 384 |
status = "disabled"; |
| 385 |
}; |
| 386 |
|
| 387 |
eeprom@53 { |
| 388 |
compatible = "atmel,24c02"; |
| 389 |
reg = <0x53>; |
| 390 |
pagesize = <16>; |
| 391 |
status = "disabled"; |
| 392 |
}; |
| 393 |
}; |
| 394 |
|
| 395 |
&macb0 { |
| 396 |
pinctrl-names = "default"; |
| 397 |
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>; |
| 398 |
phy-mode = "mii"; |
| 399 |
status = "okay"; |
| 400 |
|
| 401 |
fixed-link { |
| 402 |
speed = <100>; |
| 403 |
full-duplex; |
| 404 |
}; |
| 405 |
}; |
| 406 |
|
| 407 |
&pioA { |
| 408 |
pinctrl_adc_default: adc_default { |
| 409 |
pinmux = <PIN_PD24__GPIO>, |
| 410 |
<PIN_PD25__GPIO>, |
| 411 |
<PIN_PD26__GPIO>; |
| 412 |
bias-disable; |
| 413 |
}; |
| 414 |
|
| 415 |
/* |
| 416 |
* The ADTRG pin can work on any edge type. |
| 417 |
* In here it's being pulled up, so need to |
| 418 |
* connect it to ground to get an edge e.g. |
| 419 |
* Trigger can be configured on falling, rise |
| 420 |
* or any edge, and the pull-up can be changed |
| 421 |
* to pull-down or left floating according to |
| 422 |
* needs. |
| 423 |
*/ |
| 424 |
pinctrl_adtrg_default: adtrg_default { |
| 425 |
pinmux = <PIN_PD31__ADTRG>; |
| 426 |
bias-pull-up; |
| 427 |
}; |
| 428 |
|
| 429 |
pinctrl_flx4_default: flx4_default { |
| 430 |
pinmux = <PIN_PC28__FLEXCOM4_IO0>, |
| 431 |
<PIN_PC29__FLEXCOM4_IO1>; |
| 432 |
bias-disable; |
| 433 |
}; |
| 434 |
|
| 435 |
pinctrl_can0_default: can0_default { |
| 436 |
pinmux = <PIN_PC10__CANTX0>, |
| 437 |
<PIN_PC11__CANRX0>; |
| 438 |
bias-disable; |
| 439 |
}; |
| 440 |
|
| 441 |
pinctrl_can1_default: can1_default { |
| 442 |
pinmux = <PIN_PC26__CANTX1>, |
| 443 |
<PIN_PC27__CANRX1>; |
| 444 |
bias-disable; |
| 445 |
}; |
| 446 |
|
| 447 |
pinctrl_i2c1_default: i2c1_default { |
| 448 |
pinmux = <PIN_PD19__TWD1>, |
| 449 |
<PIN_PD20__TWCK1>; |
| 450 |
bias-disable; |
| 451 |
}; |
| 452 |
|
| 453 |
pinctrl_i2c1_gpio: i2c1_gpio { |
| 454 |
pinmux = <PIN_PD19__GPIO>, |
| 455 |
<PIN_PD20__GPIO>; |
| 456 |
bias-disable; |
| 457 |
}; |
| 458 |
|
| 459 |
pinctrl_key_gpio_default: key_gpio_default { |
| 460 |
pinmux = <PIN_PD0__GPIO>; |
| 461 |
bias-pull-up; |
| 462 |
}; |
| 463 |
|
| 464 |
pinctrl_led_gpio_default: led_gpio_default { |
| 465 |
pinmux = <PIN_PB0__GPIO>, |
| 466 |
<PIN_PB1__GPIO>, |
| 467 |
<PIN_PA31__GPIO>; |
| 468 |
bias-pull-up; |
| 469 |
}; |
| 470 |
|
| 471 |
pinctrl_qspi1_default: qspi1_default { |
| 472 |
pinmux = <PIN_PA6__QSPI1_SCK>, |
| 473 |
<PIN_PA7__QSPI1_IO0>, |
| 474 |
<PIN_PA8__QSPI1_IO1>, |
| 475 |
<PIN_PA9__QSPI1_IO2>, |
| 476 |
<PIN_PA10__QSPI1_IO3>, |
| 477 |
<PIN_PA11__QSPI1_CS>; |
| 478 |
bias-disable; |
| 479 |
}; |
| 480 |
|
| 481 |
pinctrl_sdmmc0_default: sdmmc0_default { |
| 482 |
cmd_data { |
| 483 |
pinmux = <PIN_PA1__SDMMC0_CMD>, |
| 484 |
<PIN_PA2__SDMMC0_DAT0>, |
| 485 |
<PIN_PA3__SDMMC0_DAT1>, |
| 486 |
<PIN_PA4__SDMMC0_DAT2>, |
| 487 |
<PIN_PA5__SDMMC0_DAT3>; |
| 488 |
bias-disable; |
| 489 |
}; |
| 490 |
|
| 491 |
ck_cd { |
| 492 |
pinmux = <PIN_PA0__SDMMC0_CK>, |
| 493 |
<PIN_PA13__SDMMC0_CD>; |
| 494 |
bias-disable; |
| 495 |
}; |
| 496 |
}; |
| 497 |
|
| 498 |
pinctrl_sdmmc1_default: sdmmc1_default { |
| 499 |
cmd_data { |
| 500 |
pinmux = <PIN_PA18__SDMMC1_DAT0>, |
| 501 |
<PIN_PA19__SDMMC1_DAT1>, |
| 502 |
<PIN_PA20__SDMMC1_DAT2>, |
| 503 |
<PIN_PA21__SDMMC1_DAT3>; |
| 504 |
bias-disable; |
| 505 |
}; |
| 506 |
|
| 507 |
ck_cd { |
| 508 |
pinmux = <PIN_PA22__SDMMC1_CK>, |
| 509 |
<PIN_PA28__SDMMC1_CMD>; |
| 510 |
bias-disable; |
| 511 |
}; |
| 512 |
}; |
| 513 |
|
| 514 |
pinctrl_mikrobus_i2c: mikrobus_i2c { |
| 515 |
pinmux = <PIN_PD22__TWCK0>, |
| 516 |
<PIN_PD21__TWD0>; |
| 517 |
bias-disable; |
| 518 |
}; |
| 519 |
|
| 520 |
pinctrl_i2c0_gpio: i2c0_gpio { |
| 521 |
pinmux = <PIN_PD21__GPIO>, |
| 522 |
<PIN_PD22__GPIO>; |
| 523 |
bias-disable; |
| 524 |
}; |
| 525 |
|
| 526 |
pinctrl_mikrobus1_an: mikrobus1_an { |
| 527 |
pinmux = <PIN_PD26__GPIO>; |
| 528 |
bias-disable; |
| 529 |
}; |
| 530 |
|
| 531 |
pinctrl_mikrobus1_rst: mikrobus1_rst { |
| 532 |
pinmux = <PIN_PC5__GPIO>; |
| 533 |
bias-disable; |
| 534 |
}; |
| 535 |
|
| 536 |
pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { |
| 537 |
pinmux = <PIN_PC21__FLEXCOM3_IO3>; |
| 538 |
bias-disable; |
| 539 |
}; |
| 540 |
|
| 541 |
pinctrl_mikrobus1_spi: mikrobus1_spi { |
| 542 |
pinmux = <PIN_PC20__FLEXCOM3_IO0>, |
| 543 |
<PIN_PC19__FLEXCOM3_IO1>, |
| 544 |
<PIN_PC18__FLEXCOM3_IO2>; |
| 545 |
bias-disable; |
| 546 |
}; |
| 547 |
|
| 548 |
pinctrl_mikrobus1_pwm: mikrobus1_pwm { |
| 549 |
pinmux = <PIN_PC4__TIOB1>; |
| 550 |
bias-disable; |
| 551 |
}; |
| 552 |
|
| 553 |
pinctrl_mikrobus1_int: mikrobus1_int { |
| 554 |
pinmux = <PIN_PC3__GPIO>; |
| 555 |
bias-disable; |
| 556 |
}; |
| 557 |
|
| 558 |
pinctrl_mikrobus1_uart: mikrobus1_uart { |
| 559 |
pinmux = <PIN_PB26__URXD0>, |
| 560 |
<PIN_PB27__UTXD0>; |
| 561 |
bias-disable; |
| 562 |
}; |
| 563 |
|
| 564 |
pinctrl_mikrobus2_an: mikrobus2_an { |
| 565 |
pinmux = <PIN_PD25__GPIO>; |
| 566 |
bias-disable; |
| 567 |
}; |
| 568 |
|
| 569 |
pinctrl_mikrobus2_rst: mikrobus2_rst { |
| 570 |
pinmux = <PIN_PB24__GPIO>; |
| 571 |
bias-disable; |
| 572 |
}; |
| 573 |
|
| 574 |
pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs { |
| 575 |
pinmux = <PIN_PB31__FLEXCOM0_IO3>; |
| 576 |
bias-disable; |
| 577 |
}; |
| 578 |
|
| 579 |
pinctrl_mikrobus2_spi: mikrobus2_spi { |
| 580 |
pinmux = <PIN_PB28__FLEXCOM0_IO0>, |
| 581 |
<PIN_PB29__FLEXCOM0_IO1>, |
| 582 |
<PIN_PB30__FLEXCOM0_IO2>; |
| 583 |
bias-disable; |
| 584 |
}; |
| 585 |
|
| 586 |
pinctrl_ksz_spi_cs: ksz_spi_cs { |
| 587 |
pinmux = <PIN_PC0__GPIO>; |
| 588 |
bias-disable; |
| 589 |
}; |
| 590 |
|
| 591 |
pinctrl_mikrobus2_pwm: mikrobus2_pwm { |
| 592 |
pinmux = <PIN_PB23__TIOB2>; |
| 593 |
bias-disable; |
| 594 |
}; |
| 595 |
|
| 596 |
pinctrl_mikrobus2_int: mikrobus2_int { |
| 597 |
pinmux = <PIN_PB22__GPIO>; |
| 598 |
bias-disable; |
| 599 |
}; |
| 600 |
|
| 601 |
pinctrl_mikrobus2_uart: mikrobus2_uart { |
| 602 |
pinmux = <PIN_PC12__URXD3>, |
| 603 |
<PIN_PC13__UTXD3>; |
| 604 |
bias-disable; |
| 605 |
}; |
| 606 |
|
| 607 |
pinctrl_mikrobus3_an: mikrobus3_an { |
| 608 |
pinmux = <PIN_PD24__GPIO>; |
| 609 |
bias-disable; |
| 610 |
}; |
| 611 |
|
| 612 |
pinctrl_mikrobus3_rst: mikrobus3_rst { |
| 613 |
pinmux = <PIN_PB21__GPIO>; |
| 614 |
bias-disable; |
| 615 |
}; |
| 616 |
|
| 617 |
pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs { |
| 618 |
pinmux = <PIN_PA17__SPI0_NPCS0>; |
| 619 |
bias-disable; |
| 620 |
}; |
| 621 |
|
| 622 |
pinctrl_mikrobus3_spi: mikrobus3_spi { |
| 623 |
pinmux = <PIN_PA14__SPI0_SPCK>, |
| 624 |
<PIN_PA16__SPI0_MISO>, |
| 625 |
<PIN_PA15__SPI0_MOSI>; |
| 626 |
bias-disable; |
| 627 |
}; |
| 628 |
|
| 629 |
pinctrl_mikrobus3_pwm: mikrobus3_pwm { |
| 630 |
pinmux = <PIN_PB20__TIOB3>; |
| 631 |
bias-disable; |
| 632 |
}; |
| 633 |
|
| 634 |
pinctrl_mikrobus3_int: mikrobus3_int { |
| 635 |
pinmux = <PIN_PB18__GPIO>; |
| 636 |
bias-disable; |
| 637 |
}; |
| 638 |
|
| 639 |
pinctrl_mikrobus3_uart: mikrobus3_uart { |
| 640 |
pinmux = <PIN_PC7__URXD1>, |
| 641 |
<PIN_PC8__UTXD1>; |
| 642 |
bias-disable; |
| 643 |
}; |
| 644 |
|
| 645 |
pinctrl_usb_default: usb_default { |
| 646 |
pinmux = <PIN_PC17__GPIO>; |
| 647 |
bias-disable; |
| 648 |
}; |
| 649 |
|
| 650 |
pinctrl_usba_vbus: usba_vbus { |
| 651 |
pinmux = <PIN_PD23__GPIO>; |
| 652 |
bias-disable; |
| 653 |
}; |
| 654 |
|
| 655 |
pinctrl_pwm0_pwm2_default: pwm0_pwm2_default { |
| 656 |
pinmux = <PIN_PB5__PWMH2>, |
| 657 |
<PIN_PB6__PWML2>; |
| 658 |
bias-pull-up; |
| 659 |
}; |
| 660 |
|
| 661 |
pinctrl_macb0_default: macb0_default { |
| 662 |
pinmux = <PIN_PD1__GRXCK>, |
| 663 |
<PIN_PD2__GTXER>, |
| 664 |
<PIN_PD5__GRX2>, |
| 665 |
<PIN_PD6__GRX3>, |
| 666 |
<PIN_PD7__GTX2>, |
| 667 |
<PIN_PD8__GTX3>, |
| 668 |
<PIN_PD9__GTXCK>, |
| 669 |
<PIN_PD10__GTXEN>, |
| 670 |
<PIN_PD11__GRXDV>, |
| 671 |
<PIN_PD12__GRXER>, |
| 672 |
<PIN_PD13__GRX0>, |
| 673 |
<PIN_PD14__GRX1>, |
| 674 |
<PIN_PD15__GTX0>, |
| 675 |
<PIN_PD16__GTX1>, |
| 676 |
<PIN_PD17__GMDC>, |
| 677 |
<PIN_PD18__GMDIO>; |
| 678 |
bias-disable; |
| 679 |
}; |
| 680 |
|
| 681 |
pinctrl_macb0_phy_irq: macb0_phy_irq { |
| 682 |
pinmux = <PIN_PD3__GPIO>; |
| 683 |
bias-disable; |
| 684 |
}; |
| 685 |
|
| 686 |
pinctrl_macb0_rst: macb0_sw_rst { |
| 687 |
pinmux = <PIN_PD4__GPIO>; |
| 688 |
bias-disable; |
| 689 |
}; |
| 690 |
|
| 691 |
pinctrl_flx2_default: flx2_default { |
| 692 |
pinmux = <PIN_PA6__FLEXCOM2_IO0>, |
| 693 |
<PIN_PA7__FLEXCOM2_IO1>, |
| 694 |
<PIN_PA9__FLEXCOM2_IO3>, |
| 695 |
<PIN_PA10__FLEXCOM2_IO4>; |
| 696 |
bias-disable; |
| 697 |
}; |
| 698 |
}; |
| 699 |
|
| 700 |
&pwm0 { |
| 701 |
pinctrl-names = "default"; |
| 702 |
pinctrl-0 = <&pinctrl_pwm0_pwm2_default>; |
| 703 |
status = "disabled"; /* conflict with leds, HSIC */ |
| 704 |
}; |
| 705 |
|
| 706 |
&qspi1 { |
| 707 |
pinctrl-names = "default"; |
| 708 |
pinctrl-0 = <&pinctrl_qspi1_default>; |
| 709 |
status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */ |
| 710 |
|
| 711 |
flash@0 { |
| 712 |
#address-cells = <1>; |
| 713 |
#size-cells = <1>; |
| 714 |
compatible = "jedec,spi-nor"; |
| 715 |
reg = <0>; |
| 716 |
spi-max-frequency = <104000000>; |
| 717 |
spi-cs-setup-delay-ns = <7>; |
| 718 |
spi-tx-bus-width = <4>; |
| 719 |
spi-rx-bus-width = <4>; |
| 720 |
m25p,fast-read; |
| 721 |
|
| 722 |
at91bootstrap@0 { |
| 723 |
label = "qspi: at91bootstrap"; |
| 724 |
reg = <0x00000000 0x00040000>; |
| 725 |
}; |
| 726 |
|
| 727 |
bootloader@40000 { |
| 728 |
label = "qspi: bootloader"; |
| 729 |
reg = <0x00040000 0x000c0000>; |
| 730 |
}; |
| 731 |
|
| 732 |
bootloaderenvred@100000 { |
| 733 |
label = "qspi: bootloader env redundant"; |
| 734 |
reg = <0x00100000 0x00040000>; |
| 735 |
}; |
| 736 |
|
| 737 |
bootloaderenv@140000 { |
| 738 |
label = "qspi: bootloader env"; |
| 739 |
reg = <0x00140000 0x00040000>; |
| 740 |
}; |
| 741 |
|
| 742 |
dtb@180000 { |
| 743 |
label = "qspi: device tree"; |
| 744 |
reg = <0x00180000 0x00080000>; |
| 745 |
}; |
| 746 |
|
| 747 |
kernel@200000 { |
| 748 |
label = "qspi: kernel"; |
| 749 |
reg = <0x00200000 0x00600000>; |
| 750 |
}; |
| 751 |
}; |
| 752 |
}; |
| 753 |
|
| 754 |
&sdmmc0 { |
| 755 |
no-1-8-v; |
| 756 |
bus-width = <4>; |
| 757 |
pinctrl-names = "default"; |
| 758 |
pinctrl-0 = <&pinctrl_sdmmc0_default>; |
| 759 |
status = "okay"; |
| 760 |
}; |
| 761 |
|
| 762 |
&shutdown_controller { |
| 763 |
debounce-delay-us = <976>; |
| 764 |
atmel,wakeup-rtc-timer; |
| 765 |
|
| 766 |
input@0 { |
| 767 |
reg = <0>; |
| 768 |
}; |
| 769 |
}; |
| 770 |
|
| 771 |
&spi0 { /* mikrobus3 spi */ |
| 772 |
pinctrl-names = "default"; |
| 773 |
pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>; |
| 774 |
status = "okay"; |
| 775 |
}; |
| 776 |
|
| 777 |
&tcb0 { |
| 778 |
timer0: timer@0 { |
| 779 |
compatible = "atmel,tcb-timer"; |
| 780 |
reg = <0>; |
| 781 |
}; |
| 782 |
|
| 783 |
timer1: timer@1 { |
| 784 |
compatible = "atmel,tcb-timer"; |
| 785 |
reg = <1>; |
| 786 |
}; |
| 787 |
}; |
| 788 |
|
| 789 |
&uart0 { |
| 790 |
pinctrl-names = "default"; |
| 791 |
pinctrl-0 = <&pinctrl_mikrobus1_uart>; |
| 792 |
atmel,use-dma-rx; |
| 793 |
atmel,use-dma-tx; |
| 794 |
status = "okay"; |
| 795 |
}; |
| 796 |
|
| 797 |
&uart1 { |
| 798 |
pinctrl-names = "default"; |
| 799 |
pinctrl-0 = <&pinctrl_mikrobus3_uart>; |
| 800 |
atmel,use-dma-rx; |
| 801 |
atmel,use-dma-tx; |
| 802 |
status = "okay"; |
| 803 |
}; |
| 804 |
|
| 805 |
&uart3 { |
| 806 |
pinctrl-names = "default"; |
| 807 |
pinctrl-0 = <&pinctrl_mikrobus2_uart>; |
| 808 |
atmel,use-dma-rx; |
| 809 |
atmel,use-dma-tx; |
| 810 |
status = "okay"; |
| 811 |
}; |
| 812 |
|
| 813 |
&usb0 { |
| 814 |
atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>; |
| 815 |
pinctrl-names = "default"; |
| 816 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 817 |
status = "okay"; |
| 818 |
}; |
| 819 |
|
| 820 |
&usb1 { |
| 821 |
num-ports = <3>; |
| 822 |
pinctrl-names = "default"; |
| 823 |
pinctrl-0 = <&pinctrl_usb_default>; |
| 824 |
status = "okay"; |
| 825 |
}; |
| 826 |
|
| 827 |
&usb2 { |
| 828 |
phy_type = "hsic"; |
| 829 |
status = "okay"; |
| 830 |
}; |
| 831 |
|
| 832 |
&watchdog { |
| 833 |
status = "okay"; |
| 834 |
}; |