| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <[email protected]> |
| 6 |
*/ |
| 7 |
/dts-v1/; |
| 8 |
#include "at91sam9263.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Atmel at91sam9263ek"; |
| 12 |
compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; |
| 13 |
|
| 14 |
chosen { |
| 15 |
bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; |
| 16 |
stdout-path = "serial0:115200n8"; |
| 17 |
}; |
| 18 |
|
| 19 |
memory@20000000 { |
| 20 |
reg = <0x20000000 0x4000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
clocks { |
| 24 |
slow_xtal { |
| 25 |
clock-frequency = <32768>; |
| 26 |
}; |
| 27 |
|
| 28 |
main_xtal { |
| 29 |
clock-frequency = <16367660>; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
ahb { |
| 34 |
apb { |
| 35 |
dbgu: serial@ffffee00 { |
| 36 |
status = "okay"; |
| 37 |
}; |
| 38 |
|
| 39 |
tcb0: timer@fff7c000 { |
| 40 |
timer@0 { |
| 41 |
compatible = "atmel,tcb-timer"; |
| 42 |
reg = <0>, <1>; |
| 43 |
}; |
| 44 |
|
| 45 |
timer@2 { |
| 46 |
compatible = "atmel,tcb-timer"; |
| 47 |
reg = <2>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
usart0: serial@fff8c000 { |
| 52 |
pinctrl-0 = < |
| 53 |
&pinctrl_usart0 |
| 54 |
&pinctrl_usart0_rts |
| 55 |
&pinctrl_usart0_cts>; |
| 56 |
status = "okay"; |
| 57 |
}; |
| 58 |
|
| 59 |
macb0: ethernet@fffbc000 { |
| 60 |
phy-mode = "rmii"; |
| 61 |
status = "okay"; |
| 62 |
}; |
| 63 |
|
| 64 |
usb1: gadget@fff78000 { |
| 65 |
atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; |
| 66 |
status = "okay"; |
| 67 |
}; |
| 68 |
|
| 69 |
mmc0: mmc@fff80000 { |
| 70 |
pinctrl-0 = < |
| 71 |
&pinctrl_board_mmc0 |
| 72 |
&pinctrl_mmc0_clk |
| 73 |
&pinctrl_mmc0_slot0_cmd_dat0 |
| 74 |
&pinctrl_mmc0_slot0_dat1_3>; |
| 75 |
pinctrl-names = "default"; |
| 76 |
status = "okay"; |
| 77 |
slot@0 { |
| 78 |
reg = <0>; |
| 79 |
bus-width = <4>; |
| 80 |
cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; |
| 81 |
wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
pinctrl@fffff200 { |
| 86 |
mmc0 { |
| 87 |
pinctrl_board_mmc0: mmc0-board { |
| 88 |
atmel,pins = |
| 89 |
<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ |
| 90 |
AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ |
| 91 |
}; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
spi0: spi@fffa4000 { |
| 96 |
status = "okay"; |
| 97 |
cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; |
| 98 |
flash@0 { |
| 99 |
compatible = "atmel,at45", "atmel,dataflash"; |
| 100 |
spi-max-frequency = <50000000>; |
| 101 |
reg = <0>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
rtc@fffffd20 { |
| 106 |
atmel,rtt-rtc-time-reg = <&gpbr 0x0>; |
| 107 |
}; |
| 108 |
|
| 109 |
watchdog@fffffd40 { |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
fb0: fb@700000 { |
| 115 |
display = <&display0>; |
| 116 |
status = "okay"; |
| 117 |
|
| 118 |
display0: panel { |
| 119 |
bits-per-pixel = <16>; |
| 120 |
atmel,lcdcon-backlight; |
| 121 |
atmel,dmacon = <0x1>; |
| 122 |
atmel,lcdcon2 = <0x80008002>; |
| 123 |
atmel,guard-time = <1>; |
| 124 |
|
| 125 |
display-timings { |
| 126 |
native-mode = <&timing0>; |
| 127 |
timing0: timing0 { |
| 128 |
clock-frequency = <4965000>; |
| 129 |
hactive = <240>; |
| 130 |
vactive = <320>; |
| 131 |
hback-porch = <1>; |
| 132 |
hfront-porch = <33>; |
| 133 |
vback-porch = <1>; |
| 134 |
vfront-porch = <0>; |
| 135 |
hsync-len = <5>; |
| 136 |
vsync-len = <1>; |
| 137 |
hsync-active = <1>; |
| 138 |
vsync-active = <1>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
ebi0: ebi@10000000 { |
| 145 |
status = "okay"; |
| 146 |
|
| 147 |
nand_controller: nand-controller { |
| 148 |
status = "okay"; |
| 149 |
pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; |
| 150 |
pinctrl-names = "default"; |
| 151 |
|
| 152 |
nand@3 { |
| 153 |
reg = <0x3 0x0 0x800000>; |
| 154 |
rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; |
| 155 |
cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; |
| 156 |
nand-bus-width = <8>; |
| 157 |
nand-ecc-mode = "soft"; |
| 158 |
nand-on-flash-bbt; |
| 159 |
label = "atmel_nand"; |
| 160 |
|
| 161 |
partitions { |
| 162 |
compatible = "fixed-partitions"; |
| 163 |
#address-cells = <1>; |
| 164 |
#size-cells = <1>; |
| 165 |
|
| 166 |
at91bootstrap@0 { |
| 167 |
label = "at91bootstrap"; |
| 168 |
reg = <0x0 0x20000>; |
| 169 |
}; |
| 170 |
|
| 171 |
barebox@20000 { |
| 172 |
label = "barebox"; |
| 173 |
reg = <0x20000 0x40000>; |
| 174 |
}; |
| 175 |
|
| 176 |
bareboxenv@60000 { |
| 177 |
label = "bareboxenv"; |
| 178 |
reg = <0x60000 0x20000>; |
| 179 |
}; |
| 180 |
|
| 181 |
bareboxenv2@80000 { |
| 182 |
label = "bareboxenv2"; |
| 183 |
reg = <0x80000 0x20000>; |
| 184 |
}; |
| 185 |
|
| 186 |
oftree@80000 { |
| 187 |
label = "oftree"; |
| 188 |
reg = <0xa0000 0x20000>; |
| 189 |
}; |
| 190 |
|
| 191 |
kernel@a0000 { |
| 192 |
label = "kernel"; |
| 193 |
reg = <0xc0000 0x400000>; |
| 194 |
}; |
| 195 |
|
| 196 |
rootfs@4a0000 { |
| 197 |
label = "rootfs"; |
| 198 |
reg = <0x4c0000 0x7800000>; |
| 199 |
}; |
| 200 |
|
| 201 |
data@7ca0000 { |
| 202 |
label = "data"; |
| 203 |
reg = <0x7cc0000 0x8340000>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
}; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
usb0: usb@a00000 { |
| 211 |
num-ports = <2>; |
| 212 |
status = "okay"; |
| 213 |
atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH |
| 214 |
&pioA 21 GPIO_ACTIVE_HIGH |
| 215 |
>; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
leds { |
| 220 |
compatible = "gpio-leds"; |
| 221 |
|
| 222 |
led-d3 { |
| 223 |
label = "d3"; |
| 224 |
gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; |
| 225 |
linux,default-trigger = "heartbeat"; |
| 226 |
}; |
| 227 |
|
| 228 |
led-d2 { |
| 229 |
label = "d2"; |
| 230 |
gpios = <&pioC 29 GPIO_ACTIVE_LOW>; |
| 231 |
linux,default-trigger = "nand-disk"; |
| 232 |
}; |
| 233 |
}; |
| 234 |
|
| 235 |
gpio-keys { |
| 236 |
compatible = "gpio-keys"; |
| 237 |
|
| 238 |
button-left-click { |
| 239 |
label = "left_click"; |
| 240 |
gpios = <&pioC 5 GPIO_ACTIVE_LOW>; |
| 241 |
linux,code = <272>; |
| 242 |
wakeup-source; |
| 243 |
}; |
| 244 |
|
| 245 |
button-right-click { |
| 246 |
label = "right_click"; |
| 247 |
gpios = <&pioC 4 GPIO_ACTIVE_LOW>; |
| 248 |
linux,code = <273>; |
| 249 |
wakeup-source; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
i2c-gpio-0 { |
| 254 |
status = "okay"; |
| 255 |
|
| 256 |
eeprom@50 { |
| 257 |
compatible = "atmel,24c512"; |
| 258 |
reg = <0x50>; |
| 259 |
pagesize = <128>; |
| 260 |
}; |
| 261 |
}; |
| 262 |
}; |