| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* at91-sama7g54_curiosity.dts - Device Tree file for SAMA7G54 Curiosity Board |
| 4 |
* |
| 5 |
* Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries |
| 6 |
* |
| 7 |
* Author: Mihai Sain <[email protected]> |
| 8 |
* |
| 9 |
*/ |
| 10 |
/dts-v1/; |
| 11 |
#include "sama7g5-pinfunc.h" |
| 12 |
#include "sama7g5.dtsi" |
| 13 |
#include <dt-bindings/input/input.h> |
| 14 |
#include <dt-bindings/leds/common.h> |
| 15 |
#include <dt-bindings/mfd/atmel-flexcom.h> |
| 16 |
#include <dt-bindings/pinctrl/at91.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Microchip SAMA7G54 Curiosity"; |
| 20 |
compatible = "microchip,sama7g54-curiosity", "microchip,sama7g5", "microchip,sama7"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
serial0 = &uart3; |
| 24 |
i2c0 = &i2c10; |
| 25 |
}; |
| 26 |
|
| 27 |
chosen { |
| 28 |
stdout-path = "serial0:115200n8"; |
| 29 |
}; |
| 30 |
|
| 31 |
gpio-keys { |
| 32 |
compatible = "gpio-keys"; |
| 33 |
pinctrl-names = "default"; |
| 34 |
pinctrl-0 = <&pinctrl_key_gpio_default>; |
| 35 |
|
| 36 |
button-user { |
| 37 |
label = "user-button"; |
| 38 |
gpios = <&pioA PIN_PD19 GPIO_ACTIVE_LOW>; |
| 39 |
linux,code = <KEY_PROG1>; |
| 40 |
wakeup-source; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
leds { |
| 45 |
compatible = "gpio-leds"; |
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&pinctrl_led_gpio_default>; |
| 48 |
|
| 49 |
led-red { |
| 50 |
color = <LED_COLOR_ID_RED>; |
| 51 |
function = LED_FUNCTION_POWER; |
| 52 |
gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>; |
| 53 |
default-state = "off"; |
| 54 |
}; |
| 55 |
|
| 56 |
led-green { |
| 57 |
color = <LED_COLOR_ID_GREEN>; |
| 58 |
function = LED_FUNCTION_BOOT; |
| 59 |
gpios = <&pioA PIN_PD14 GPIO_ACTIVE_HIGH>; |
| 60 |
default-state = "off"; |
| 61 |
}; |
| 62 |
|
| 63 |
led-blue { |
| 64 |
color = <LED_COLOR_ID_BLUE>; |
| 65 |
function = LED_FUNCTION_CPU; |
| 66 |
gpios = <&pioA PIN_PB15 GPIO_ACTIVE_HIGH>; |
| 67 |
linux,default-trigger = "heartbeat"; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
memory@60000000 { |
| 72 |
device_type = "memory"; |
| 73 |
reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */ |
| 74 |
}; |
| 75 |
|
| 76 |
reg_5v: regulator-5v { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "5V_MAIN"; |
| 79 |
regulator-min-microvolt = <5000000>; |
| 80 |
regulator-max-microvolt = <5000000>; |
| 81 |
regulator-always-on; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
&adc { |
| 86 |
vddana-supply = <&vddout25>; |
| 87 |
vref-supply = <&vddout25>; |
| 88 |
pinctrl-names = "default"; |
| 89 |
pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>; |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
&cpu0 { |
| 94 |
cpu-supply = <&vddcpu>; |
| 95 |
}; |
| 96 |
|
| 97 |
&dma0 { |
| 98 |
status = "okay"; |
| 99 |
}; |
| 100 |
|
| 101 |
&dma1 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
&dma2 { |
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
|
| 109 |
&ebi { |
| 110 |
pinctrl-names = "default"; |
| 111 |
pinctrl-0 = <&pinctrl_nand_default>; |
| 112 |
status = "okay"; |
| 113 |
|
| 114 |
nand_controller: nand-controller { |
| 115 |
status = "okay"; |
| 116 |
|
| 117 |
nand@3 { |
| 118 |
reg = <0x3 0x0 0x800000>; |
| 119 |
atmel,rb = <0>; |
| 120 |
nand-bus-width = <8>; |
| 121 |
nand-ecc-mode = "hw"; |
| 122 |
nand-ecc-strength = <8>; |
| 123 |
nand-ecc-step-size = <512>; |
| 124 |
nand-on-flash-bbt; |
| 125 |
label = "nand"; |
| 126 |
|
| 127 |
partitions { |
| 128 |
compatible = "fixed-partitions"; |
| 129 |
#address-cells = <1>; |
| 130 |
#size-cells = <1>; |
| 131 |
|
| 132 |
at91bootstrap@0 { |
| 133 |
label = "nand: at91bootstrap"; |
| 134 |
reg = <0x0 0x40000>; |
| 135 |
}; |
| 136 |
|
| 137 |
bootloader@40000 { |
| 138 |
label = "nand: u-boot"; |
| 139 |
reg = <0x40000 0x100000>; |
| 140 |
}; |
| 141 |
|
| 142 |
bootloaderenv@140000 { |
| 143 |
label = "nand: u-boot env"; |
| 144 |
reg = <0x140000 0x40000>; |
| 145 |
}; |
| 146 |
|
| 147 |
dtb@180000 { |
| 148 |
label = "nand: device tree"; |
| 149 |
reg = <0x180000 0x80000>; |
| 150 |
}; |
| 151 |
|
| 152 |
kernel@200000 { |
| 153 |
label = "nand: kernel"; |
| 154 |
reg = <0x200000 0x600000>; |
| 155 |
}; |
| 156 |
|
| 157 |
rootfs@800000 { |
| 158 |
label = "nand: rootfs"; |
| 159 |
reg = <0x800000 0x1f800000>; |
| 160 |
}; |
| 161 |
}; |
| 162 |
}; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
&flx3 { |
| 167 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; |
| 168 |
status = "okay"; |
| 169 |
|
| 170 |
uart3: serial@200 { |
| 171 |
pinctrl-names = "default"; |
| 172 |
pinctrl-0 = <&pinctrl_flx3_default>; |
| 173 |
status = "okay"; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
&flx10 { |
| 178 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; |
| 179 |
status = "okay"; |
| 180 |
|
| 181 |
i2c10: i2c@600 { |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&pinctrl_flx10_default>; |
| 184 |
i2c-analog-filter; |
| 185 |
i2c-digital-filter; |
| 186 |
i2c-digital-filter-width-ns = <35>; |
| 187 |
status = "okay"; |
| 188 |
|
| 189 |
power-monitor@1f { |
| 190 |
compatible = "microchip,pac1934"; |
| 191 |
reg = <0x1f>; |
| 192 |
#address-cells = <1>; |
| 193 |
#size-cells = <0>; |
| 194 |
|
| 195 |
channel@1 { |
| 196 |
reg = <0x1>; |
| 197 |
shunt-resistor-micro-ohms = <47000>; |
| 198 |
label = "VDD3V3"; |
| 199 |
}; |
| 200 |
|
| 201 |
channel@2 { |
| 202 |
reg = <0x2>; |
| 203 |
shunt-resistor-micro-ohms = <47000>; |
| 204 |
label = "VDDIODDR"; |
| 205 |
}; |
| 206 |
|
| 207 |
channel@3 { |
| 208 |
reg = <0x3>; |
| 209 |
shunt-resistor-micro-ohms = <47000>; |
| 210 |
label = "VDDCORE"; |
| 211 |
}; |
| 212 |
|
| 213 |
channel@4 { |
| 214 |
reg = <0x4>; |
| 215 |
shunt-resistor-micro-ohms = <47000>; |
| 216 |
label = "VDDCPU"; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
eeprom@51 { |
| 221 |
compatible = "atmel,24c02"; |
| 222 |
reg = <0x51>; |
| 223 |
pagesize = <16>; |
| 224 |
size = <256>; |
| 225 |
vcc-supply = <&vdd_3v3>; |
| 226 |
}; |
| 227 |
|
| 228 |
pmic@5b { |
| 229 |
compatible = "microchip,mcp16502"; |
| 230 |
reg = <0x5b>; |
| 231 |
lvin-supply = <®_5v>; |
| 232 |
pvin1-supply = <®_5v>; |
| 233 |
pvin2-supply = <®_5v>; |
| 234 |
pvin3-supply = <®_5v>; |
| 235 |
pvin4-supply = <®_5v>; |
| 236 |
|
| 237 |
regulators { |
| 238 |
vdd_3v3: VDD_IO { |
| 239 |
regulator-name = "VDD_IO"; |
| 240 |
regulator-min-microvolt = <3300000>; |
| 241 |
regulator-max-microvolt = <3300000>; |
| 242 |
regulator-initial-mode = <2>; |
| 243 |
regulator-allowed-modes = <2>, <4>; |
| 244 |
regulator-always-on; |
| 245 |
|
| 246 |
regulator-state-standby { |
| 247 |
regulator-on-in-suspend; |
| 248 |
regulator-suspend-microvolt = <3300000>; |
| 249 |
regulator-mode = <4>; |
| 250 |
}; |
| 251 |
|
| 252 |
regulator-state-mem { |
| 253 |
regulator-off-in-suspend; |
| 254 |
regulator-mode = <4>; |
| 255 |
}; |
| 256 |
}; |
| 257 |
|
| 258 |
vddioddr: VDD_DDR { |
| 259 |
regulator-name = "VDD_DDR"; |
| 260 |
regulator-min-microvolt = <1350000>; |
| 261 |
regulator-max-microvolt = <1350000>; |
| 262 |
regulator-initial-mode = <2>; |
| 263 |
regulator-allowed-modes = <2>, <4>; |
| 264 |
regulator-always-on; |
| 265 |
|
| 266 |
regulator-state-standby { |
| 267 |
regulator-on-in-suspend; |
| 268 |
regulator-suspend-microvolt = <1350000>; |
| 269 |
regulator-mode = <4>; |
| 270 |
}; |
| 271 |
|
| 272 |
regulator-state-mem { |
| 273 |
regulator-on-in-suspend; |
| 274 |
regulator-suspend-microvolt = <1350000>; |
| 275 |
regulator-mode = <4>; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
vddcore: VDD_CORE { |
| 280 |
regulator-name = "VDD_CORE"; |
| 281 |
regulator-min-microvolt = <1150000>; |
| 282 |
regulator-max-microvolt = <1150000>; |
| 283 |
regulator-initial-mode = <2>; |
| 284 |
regulator-allowed-modes = <2>, <4>; |
| 285 |
regulator-always-on; |
| 286 |
|
| 287 |
regulator-state-standby { |
| 288 |
regulator-on-in-suspend; |
| 289 |
regulator-suspend-microvolt = <1150000>; |
| 290 |
regulator-mode = <4>; |
| 291 |
}; |
| 292 |
|
| 293 |
regulator-state-mem { |
| 294 |
regulator-off-in-suspend; |
| 295 |
regulator-mode = <4>; |
| 296 |
}; |
| 297 |
}; |
| 298 |
|
| 299 |
vddcpu: VDD_OTHER { |
| 300 |
regulator-name = "VDD_OTHER"; |
| 301 |
regulator-min-microvolt = <1050000>; |
| 302 |
regulator-max-microvolt = <1250000>; |
| 303 |
regulator-initial-mode = <2>; |
| 304 |
regulator-allowed-modes = <2>, <4>; |
| 305 |
regulator-ramp-delay = <3125>; |
| 306 |
regulator-always-on; |
| 307 |
|
| 308 |
regulator-state-standby { |
| 309 |
regulator-on-in-suspend; |
| 310 |
regulator-suspend-microvolt = <1050000>; |
| 311 |
regulator-mode = <4>; |
| 312 |
}; |
| 313 |
|
| 314 |
regulator-state-mem { |
| 315 |
regulator-off-in-suspend; |
| 316 |
regulator-mode = <4>; |
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
vldo1: LDO1 { |
| 321 |
regulator-name = "LDO1"; |
| 322 |
regulator-min-microvolt = <1800000>; |
| 323 |
regulator-max-microvolt = <1800000>; |
| 324 |
regulator-always-on; |
| 325 |
|
| 326 |
regulator-state-standby { |
| 327 |
regulator-suspend-microvolt = <1800000>; |
| 328 |
regulator-on-in-suspend; |
| 329 |
}; |
| 330 |
|
| 331 |
regulator-state-mem { |
| 332 |
regulator-off-in-suspend; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
vldo2: LDO2 { |
| 337 |
regulator-name = "LDO2"; |
| 338 |
regulator-min-microvolt = <3300000>; |
| 339 |
regulator-max-microvolt = <3300000>; |
| 340 |
regulator-always-on; |
| 341 |
|
| 342 |
regulator-state-standby { |
| 343 |
regulator-suspend-microvolt = <3300000>; |
| 344 |
regulator-on-in-suspend; |
| 345 |
}; |
| 346 |
|
| 347 |
regulator-state-mem { |
| 348 |
regulator-off-in-suspend; |
| 349 |
}; |
| 350 |
}; |
| 351 |
}; |
| 352 |
}; |
| 353 |
}; |
| 354 |
}; |
| 355 |
|
| 356 |
&main_xtal { |
| 357 |
clock-frequency = <24000000>; |
| 358 |
}; |
| 359 |
|
| 360 |
&qspi1 { |
| 361 |
pinctrl-names = "default"; |
| 362 |
pinctrl-0 = <&pinctrl_qspi1_default>; |
| 363 |
status = "okay"; |
| 364 |
|
| 365 |
flash@0 { |
| 366 |
compatible = "jedec,spi-nor"; |
| 367 |
reg = <0x0>; |
| 368 |
spi-max-frequency = <100000000>; |
| 369 |
spi-tx-bus-width = <4>; |
| 370 |
spi-rx-bus-width = <4>; |
| 371 |
m25p,fast-read; |
| 372 |
label = "at91-qspi"; |
| 373 |
|
| 374 |
partitions { |
| 375 |
compatible = "fixed-partitions"; |
| 376 |
#address-cells = <1>; |
| 377 |
#size-cells = <1>; |
| 378 |
|
| 379 |
at91bootstrap@0 { |
| 380 |
label = "qspi1: at91bootstrap"; |
| 381 |
reg = <0x0 0x40000>; |
| 382 |
}; |
| 383 |
|
| 384 |
bootloader@40000 { |
| 385 |
label = "qspi1: u-boot"; |
| 386 |
reg = <0x40000 0x100000>; |
| 387 |
}; |
| 388 |
|
| 389 |
bootloaderenv@140000 { |
| 390 |
label = "qspi1: u-boot env"; |
| 391 |
reg = <0x140000 0x40000>; |
| 392 |
}; |
| 393 |
|
| 394 |
dtb@180000 { |
| 395 |
label = "qspi1: device tree"; |
| 396 |
reg = <0x180000 0x80000>; |
| 397 |
}; |
| 398 |
|
| 399 |
kernel@200000 { |
| 400 |
label = "qspi1: kernel"; |
| 401 |
reg = <0x200000 0x600000>; |
| 402 |
}; |
| 403 |
}; |
| 404 |
}; |
| 405 |
}; |
| 406 |
|
| 407 |
&pioA { |
| 408 |
pinctrl_flx3_default: flx3-default { |
| 409 |
pinmux = <PIN_PD16__FLEXCOM3_IO0>, |
| 410 |
<PIN_PD17__FLEXCOM3_IO1>; |
| 411 |
bias-pull-up; |
| 412 |
}; |
| 413 |
|
| 414 |
pinctrl_flx10_default: flx10-default { |
| 415 |
pinmux = <PIN_PC30__FLEXCOM10_IO0>, |
| 416 |
<PIN_PC31__FLEXCOM10_IO1>; |
| 417 |
bias-pull-up; |
| 418 |
}; |
| 419 |
|
| 420 |
pinctrl_key_gpio_default: key-gpio-default { |
| 421 |
pinmux = <PIN_PD19__GPIO>; |
| 422 |
bias-pull-up; |
| 423 |
}; |
| 424 |
|
| 425 |
pinctrl_led_gpio_default: led-gpio-default { |
| 426 |
pinmux = <PIN_PD13__GPIO>, |
| 427 |
<PIN_PD14__GPIO>, |
| 428 |
<PIN_PB15__GPIO>; |
| 429 |
bias-pull-up; |
| 430 |
}; |
| 431 |
|
| 432 |
pinctrl_mikrobus1_an_default: mikrobus1-an-default { |
| 433 |
pinmux = <PIN_PC15__GPIO>; |
| 434 |
bias-disable; |
| 435 |
}; |
| 436 |
|
| 437 |
pinctrl_mikrobus2_an_default: mikrobus2-an-default { |
| 438 |
pinmux = <PIN_PC13__GPIO>; |
| 439 |
bias-disable; |
| 440 |
}; |
| 441 |
|
| 442 |
pinctrl_nand_default: nand-default { |
| 443 |
pinmux = <PIN_PD9__D0>, |
| 444 |
<PIN_PD10__D1>, |
| 445 |
<PIN_PD11__D2>, |
| 446 |
<PIN_PC21__D3>, |
| 447 |
<PIN_PC22__D4>, |
| 448 |
<PIN_PC23__D5>, |
| 449 |
<PIN_PC24__D6>, |
| 450 |
<PIN_PD2__D7>, |
| 451 |
<PIN_PD3__NANDRDY>, |
| 452 |
<PIN_PD4__NCS3_NANDCS>, |
| 453 |
<PIN_PD5__NWE_NWR0_NANDWE>, |
| 454 |
<PIN_PD6__NRD_NANDOE>, |
| 455 |
<PIN_PD7__A21_NANDALE>, |
| 456 |
<PIN_PD8__A22_NANDCLE>; |
| 457 |
bias-disable; |
| 458 |
slew-rate = <0>; |
| 459 |
}; |
| 460 |
|
| 461 |
pinctrl_qspi1_default: qspi1-default { |
| 462 |
pinmux = <PIN_PB22__QSPI1_IO3>, |
| 463 |
<PIN_PB23__QSPI1_IO2>, |
| 464 |
<PIN_PB24__QSPI1_IO1>, |
| 465 |
<PIN_PB25__QSPI1_IO0>, |
| 466 |
<PIN_PB26__QSPI1_CS>, |
| 467 |
<PIN_PB27__QSPI1_SCK>; |
| 468 |
bias-pull-up; |
| 469 |
slew-rate = <0>; |
| 470 |
}; |
| 471 |
|
| 472 |
pinctrl_sdmmc0_default: sdmmc0-default { |
| 473 |
pinmux = <PIN_PA0__SDMMC0_CK>, |
| 474 |
<PIN_PA1__SDMMC0_CMD>, |
| 475 |
<PIN_PA2__SDMMC0_RSTN>, |
| 476 |
<PIN_PA3__SDMMC0_DAT0>, |
| 477 |
<PIN_PA4__SDMMC0_DAT1>, |
| 478 |
<PIN_PA5__SDMMC0_DAT2>, |
| 479 |
<PIN_PA6__SDMMC0_DAT3>; |
| 480 |
bias-pull-up; |
| 481 |
slew-rate = <0>; |
| 482 |
}; |
| 483 |
|
| 484 |
pinctrl_sdmmc1_default: sdmmc1-default { |
| 485 |
pinmux = <PIN_PB29__SDMMC1_CMD>, |
| 486 |
<PIN_PB30__SDMMC1_CK>, |
| 487 |
<PIN_PB31__SDMMC1_DAT0>, |
| 488 |
<PIN_PC0__SDMMC1_DAT1>, |
| 489 |
<PIN_PC1__SDMMC1_DAT2>, |
| 490 |
<PIN_PC2__SDMMC1_DAT3>, |
| 491 |
<PIN_PC4__SDMMC1_CD>; |
| 492 |
bias-pull-up; |
| 493 |
slew-rate = <0>; |
| 494 |
}; |
| 495 |
}; |
| 496 |
|
| 497 |
&rtt { |
| 498 |
atmel,rtt-rtc-time-reg = <&gpbr 0x0>; |
| 499 |
}; |
| 500 |
|
| 501 |
/* M.2 slot for wireless card */ |
| 502 |
&sdmmc0 { |
| 503 |
bus-width = <4>; |
| 504 |
cd-gpios = <&pioA 31 GPIO_ACTIVE_LOW>; |
| 505 |
disable-wp; |
| 506 |
sdhci-caps-mask = <0x0 0x00200000>; |
| 507 |
vmmc-supply = <&vdd_3v3>; |
| 508 |
vqmmc-supply = <&vdd_3v3>; |
| 509 |
pinctrl-names = "default"; |
| 510 |
pinctrl-0 = <&pinctrl_sdmmc0_default>; |
| 511 |
status = "okay"; |
| 512 |
}; |
| 513 |
|
| 514 |
/* micro SD socket */ |
| 515 |
&sdmmc1 { |
| 516 |
bus-width = <4>; |
| 517 |
disable-wp; |
| 518 |
sdhci-caps-mask = <0x0 0x00200000>; |
| 519 |
vmmc-supply = <&vdd_3v3>; |
| 520 |
vqmmc-supply = <&vdd_3v3>; |
| 521 |
pinctrl-names = "default"; |
| 522 |
pinctrl-0 = <&pinctrl_sdmmc1_default>; |
| 523 |
status = "okay"; |
| 524 |
}; |
| 525 |
|
| 526 |
&slow_xtal { |
| 527 |
clock-frequency = <32768>; |
| 528 |
}; |
| 529 |
|
| 530 |
&shdwc { |
| 531 |
debounce-delay-us = <976>; |
| 532 |
status = "okay"; |
| 533 |
|
| 534 |
input@0 { |
| 535 |
reg = <0>; |
| 536 |
}; |
| 537 |
}; |
| 538 |
|
| 539 |
&tcb0 { |
| 540 |
timer0: timer@0 { |
| 541 |
compatible = "atmel,tcb-timer"; |
| 542 |
reg = <0>; |
| 543 |
}; |
| 544 |
|
| 545 |
timer1: timer@1 { |
| 546 |
compatible = "atmel,tcb-timer"; |
| 547 |
reg = <1>; |
| 548 |
}; |
| 549 |
}; |
| 550 |
|
| 551 |
&trng { |
| 552 |
status = "okay"; |
| 553 |
}; |
| 554 |
|
| 555 |
&vddout25 { |
| 556 |
vin-supply = <&vdd_3v3>; |
| 557 |
status = "okay"; |
| 558 |
}; |