| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board |
| 4 |
* |
| 5 |
* Copyright (C) 2017 Axentia Technologies AB |
| 6 |
* |
| 7 |
* Author: Peter Rosin <[email protected]> |
| 8 |
*/ |
| 9 |
/dts-v1/; |
| 10 |
#include <dt-bindings/pwm/pwm.h> |
| 11 |
#include "at91-linea.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Axentia TSE-850 3.0"; |
| 15 |
compatible = "axentia,tse850v3", "axentia,linea", |
| 16 |
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; |
| 17 |
|
| 18 |
sck: oscillator { |
| 19 |
compatible = "fixed-clock"; |
| 20 |
|
| 21 |
#clock-cells = <0>; |
| 22 |
clock-frequency = <16000000>; |
| 23 |
clock-output-names = "sck"; |
| 24 |
}; |
| 25 |
|
| 26 |
reg_3v3: regulator { |
| 27 |
compatible = "regulator-fixed"; |
| 28 |
|
| 29 |
regulator-name = "3v3-supply"; |
| 30 |
regulator-min-microvolt = <3300000>; |
| 31 |
regulator-max-microvolt = <3300000>; |
| 32 |
}; |
| 33 |
|
| 34 |
ana: reg-ana { |
| 35 |
compatible = "pwm-regulator"; |
| 36 |
|
| 37 |
regulator-name = "ANA"; |
| 38 |
|
| 39 |
pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; |
| 40 |
pwm-dutycycle-unit = <1000>; |
| 41 |
pwm-dutycycle-range = <100 1000>; |
| 42 |
|
| 43 |
regulator-min-microvolt = <2000000>; |
| 44 |
regulator-max-microvolt = <20000000>; |
| 45 |
regulator-ramp-delay = <1000>; |
| 46 |
}; |
| 47 |
|
| 48 |
sound { |
| 49 |
compatible = "axentia,tse850-pcm5142"; |
| 50 |
|
| 51 |
axentia,cpu-dai = <&ssc0>; |
| 52 |
axentia,audio-codec = <&pcm5142>; |
| 53 |
|
| 54 |
axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; |
| 55 |
axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; |
| 56 |
axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; |
| 57 |
|
| 58 |
axentia,ana-supply = <&ana>; |
| 59 |
}; |
| 60 |
|
| 61 |
dac: dpot-dac { |
| 62 |
compatible = "dpot-dac"; |
| 63 |
vref-supply = <®_3v3>; |
| 64 |
io-channels = <&dpot 0>; |
| 65 |
io-channel-names = "dpot"; |
| 66 |
#io-channel-cells = <1>; |
| 67 |
}; |
| 68 |
|
| 69 |
env_det: envelope-detector { |
| 70 |
compatible = "axentia,tse850-envelope-detector"; |
| 71 |
io-channels = <&dac 0>; |
| 72 |
io-channel-names = "dac"; |
| 73 |
#io-channel-cells = <1>; |
| 74 |
|
| 75 |
interrupt-parent = <&pioA>; |
| 76 |
interrupts = <3 IRQ_TYPE_EDGE_RISING>; |
| 77 |
interrupt-names = "comp"; |
| 78 |
}; |
| 79 |
|
| 80 |
mux: mux-controller { |
| 81 |
compatible = "gpio-mux"; |
| 82 |
#mux-control-cells = <0>; |
| 83 |
|
| 84 |
mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, |
| 85 |
<&pioA 1 GPIO_ACTIVE_HIGH>, |
| 86 |
<&pioA 2 GPIO_ACTIVE_HIGH>; |
| 87 |
idle-state = <0>; |
| 88 |
}; |
| 89 |
|
| 90 |
envelope-detector-mux { |
| 91 |
compatible = "io-channel-mux"; |
| 92 |
io-channels = <&env_det 0>; |
| 93 |
io-channel-names = "parent"; |
| 94 |
|
| 95 |
mux-controls = <&mux>; |
| 96 |
|
| 97 |
channels = "", "", |
| 98 |
"sync-1", |
| 99 |
"in", |
| 100 |
"out", |
| 101 |
"sync-2", |
| 102 |
"sys-reg", |
| 103 |
"ana-reg"; |
| 104 |
}; |
| 105 |
|
| 106 |
leds { |
| 107 |
compatible = "gpio-leds"; |
| 108 |
|
| 109 |
led-ch1-red { |
| 110 |
label = "ch-1:red"; |
| 111 |
gpios = <&pioA 23 GPIO_ACTIVE_LOW>; |
| 112 |
}; |
| 113 |
led-ch1-green { |
| 114 |
label = "ch-1:green"; |
| 115 |
gpios = <&pioA 22 GPIO_ACTIVE_LOW>; |
| 116 |
}; |
| 117 |
led-ch2-red { |
| 118 |
label = "ch-2:red"; |
| 119 |
gpios = <&pioA 21 GPIO_ACTIVE_LOW>; |
| 120 |
}; |
| 121 |
led-ch2-green { |
| 122 |
label = "ch-2:green"; |
| 123 |
gpios = <&pioA 20 GPIO_ACTIVE_LOW>; |
| 124 |
}; |
| 125 |
led-data-red { |
| 126 |
label = "data:red"; |
| 127 |
gpios = <&pioA 19 GPIO_ACTIVE_LOW>; |
| 128 |
}; |
| 129 |
led-data-green { |
| 130 |
label = "data:green"; |
| 131 |
gpios = <&pioA 18 GPIO_ACTIVE_LOW>; |
| 132 |
}; |
| 133 |
led-alarm-red { |
| 134 |
label = "alarm:red"; |
| 135 |
gpios = <&pioA 17 GPIO_ACTIVE_LOW>; |
| 136 |
}; |
| 137 |
led-alarm-green { |
| 138 |
label = "alarm:green"; |
| 139 |
gpios = <&pioA 16 GPIO_ACTIVE_LOW>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
&nand { |
| 145 |
partitions { |
| 146 |
compatible = "fixed-partitions"; |
| 147 |
#address-cells = <1>; |
| 148 |
#size-cells = <1>; |
| 149 |
|
| 150 |
at91bootstrap@0 { |
| 151 |
label = "at91bootstrap"; |
| 152 |
reg = <0x0 0x40000>; |
| 153 |
}; |
| 154 |
|
| 155 |
barebox@40000 { |
| 156 |
label = "bootloader"; |
| 157 |
reg = <0x40000 0x60000>; |
| 158 |
}; |
| 159 |
|
| 160 |
bareboxenv@c0000 { |
| 161 |
label = "bareboxenv"; |
| 162 |
reg = <0xc0000 0x40000>; |
| 163 |
}; |
| 164 |
|
| 165 |
bareboxenv2@100000 { |
| 166 |
label = "bareboxenv2"; |
| 167 |
reg = <0x100000 0x40000>; |
| 168 |
}; |
| 169 |
|
| 170 |
oftree@180000 { |
| 171 |
label = "oftree"; |
| 172 |
reg = <0x180000 0x20000>; |
| 173 |
}; |
| 174 |
|
| 175 |
kernel@200000 { |
| 176 |
label = "kernel"; |
| 177 |
reg = <0x200000 0x500000>; |
| 178 |
}; |
| 179 |
|
| 180 |
rootfs@800000 { |
| 181 |
label = "rootfs"; |
| 182 |
reg = <0x800000 0x0f800000>; |
| 183 |
}; |
| 184 |
|
| 185 |
ovlfs@10000000 { |
| 186 |
label = "ovlfs"; |
| 187 |
reg = <0x10000000 0x10000000>; |
| 188 |
}; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
&ssc0 { |
| 193 |
#sound-dai-cells = <0>; |
| 194 |
|
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&i2c0 { |
| 199 |
status = "okay"; |
| 200 |
|
| 201 |
jc42@18 { |
| 202 |
compatible = "nxp,se97b", "jedec,jc-42.4-temp"; |
| 203 |
reg = <0x18>; |
| 204 |
smbus-timeout-disable; |
| 205 |
}; |
| 206 |
|
| 207 |
dpot: mcp4651-104@28 { |
| 208 |
compatible = "microchip,mcp4651-104"; |
| 209 |
reg = <0x28>; |
| 210 |
#io-channel-cells = <1>; |
| 211 |
}; |
| 212 |
|
| 213 |
pcm5142: pcm5142@4c { |
| 214 |
compatible = "ti,pcm5142"; |
| 215 |
|
| 216 |
reg = <0x4c>; |
| 217 |
#sound-dai-cells = <0>; |
| 218 |
|
| 219 |
AVDD-supply = <®_3v3>; |
| 220 |
DVDD-supply = <®_3v3>; |
| 221 |
CPVDD-supply = <®_3v3>; |
| 222 |
|
| 223 |
clocks = <&sck>; |
| 224 |
|
| 225 |
pll-in = <3>; |
| 226 |
pll-out = <6>; |
| 227 |
}; |
| 228 |
|
| 229 |
eeprom@50 { |
| 230 |
compatible = "nxp,se97b", "atmel,24c02"; |
| 231 |
reg = <0x50>; |
| 232 |
pagesize = <16>; |
| 233 |
}; |
| 234 |
}; |
| 235 |
|
| 236 |
&pinctrl { |
| 237 |
tse850 { |
| 238 |
pinctrl_usba_vbus: usba-vbus { |
| 239 |
atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO |
| 240 |
AT91_PINCTRL_DEGLITCH>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
}; |
| 244 |
|
| 245 |
&watchdog { |
| 246 |
status = "okay"; |
| 247 |
}; |
| 248 |
|
| 249 |
&usart0 { |
| 250 |
status = "okay"; |
| 251 |
|
| 252 |
atmel,use-dma-rx; |
| 253 |
}; |
| 254 |
|
| 255 |
&pwm0 { |
| 256 |
status = "okay"; |
| 257 |
|
| 258 |
pinctrl-0 = <&pinctrl_pwm0_pwml2_1>; |
| 259 |
pinctrl-names = "default"; |
| 260 |
}; |
| 261 |
|
| 262 |
&macb1 { |
| 263 |
status = "okay"; |
| 264 |
|
| 265 |
phy-mode = "rmii"; |
| 266 |
|
| 267 |
#address-cells = <1>; |
| 268 |
#size-cells = <0>; |
| 269 |
|
| 270 |
phy0: ethernet-phy@3 { |
| 271 |
reg = <3>; |
| 272 |
|
| 273 |
interrupt-parent = <&pioE>; |
| 274 |
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 275 |
}; |
| 276 |
}; |
| 277 |
|
| 278 |
&usb0 { |
| 279 |
status = "okay"; |
| 280 |
|
| 281 |
pinctrl-names = "default"; |
| 282 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 283 |
atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>; |
| 284 |
}; |
| 285 |
|
| 286 |
&usb1 { |
| 287 |
status = "okay"; |
| 288 |
|
| 289 |
num-ports = <1>; |
| 290 |
atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; |
| 291 |
atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>; |
| 292 |
}; |
| 293 |
|
| 294 |
&usb2 { |
| 295 |
status = "okay"; |
| 296 |
}; |
| 297 |
|
| 298 |
&dbgu { |
| 299 |
status = "okay"; |
| 300 |
|
| 301 |
dmas = <0>, <0>; /* Do not use DMA for dbgu */ |
| 302 |
}; |
| 303 |
|
| 304 |
&pioA { |
| 305 |
gpio-line-names = |
| 306 |
/* 0 */ "SUP-A", "SUP-B", "SUP-C", "SIG<LEV", |
| 307 |
/* 4 */ "", "/RFRST", "", "", |
| 308 |
/* 8 */ "/ADD", "", "/LOOP1", "/LOOP2", |
| 309 |
/* 12 */ "", "", "", "", |
| 310 |
/* 16 */ "LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED", |
| 311 |
/* 20 */ "LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED", |
| 312 |
/* 24 */ "", "", "", "", |
| 313 |
/* 28 */ "", "", "SDA", "SCL"; |
| 314 |
}; |
| 315 |
|
| 316 |
&pioB { |
| 317 |
gpio-line-names = |
| 318 |
/* 0 */ "", "", "", "", |
| 319 |
/* 4 */ "", "", "", "", |
| 320 |
/* 8 */ "", "", "", "", |
| 321 |
/* 12 */ "", "", "", "", |
| 322 |
/* 16 */ "", "", "", "", |
| 323 |
/* 20 */ "", "", "", "", |
| 324 |
/* 24 */ "", "", "SIG<LIN", "SIG>LIN", |
| 325 |
/* 28 */ "RXD", "TXD", "BRX", "BTX"; |
| 326 |
}; |
| 327 |
|
| 328 |
&pioC { |
| 329 |
gpio-line-names = |
| 330 |
/* 0 */ "ETX0", "ETX1", "ERX0", "ERX1", |
| 331 |
/* 4 */ "ETXEN", "ECRSDV", "ERXER", "EREFCK", |
| 332 |
/* 8 */ "EMDC", "EMDIO", "", "", |
| 333 |
/* 12 */ "", "", "", "/ILIM", |
| 334 |
/* 16 */ "BCK", "LRCK", "DIN", "", |
| 335 |
/* 20 */ "", "", "", "", |
| 336 |
/* 24 */ "", "", "", "", |
| 337 |
/* 28 */ "", "", "", "VBUS"; |
| 338 |
}; |
| 339 |
|
| 340 |
&pioD { |
| 341 |
gpio-line-names = |
| 342 |
/* 0 */ "I1", "I2", "O1", "EXTVEN", |
| 343 |
/* 4 */ "", "456KHZ", "VCTRL", "SYNCSEL", |
| 344 |
/* 8 */ "STEREO", "", "", "", |
| 345 |
/* 12 */ "", "", "", "", |
| 346 |
/* 16 */ "", ">LIN", "LIN>", "", |
| 347 |
/* 20 */ "VREFEN", "", "", "", |
| 348 |
/* 24 */ "", "", "VINOK", "", |
| 349 |
/* 28 */ "POEOK", "USBON", "POELOAD", ""; |
| 350 |
}; |
| 351 |
|
| 352 |
&pioE { |
| 353 |
gpio-line-names = |
| 354 |
/* 0 */ "", "", "", "", |
| 355 |
/* 4 */ "", "", "", "", |
| 356 |
/* 8 */ "", "", "", "", |
| 357 |
/* 12 */ "", "", "", "", |
| 358 |
/* 16 */ "", "", "", "", |
| 359 |
/* 20 */ "", "ALE", "CLE", "", |
| 360 |
/* 24 */ "", "", "", "", |
| 361 |
/* 28 */ "", "", "", "/ETHINT"; |
| 362 |
}; |