| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board |
| 4 |
* |
| 5 |
* Copyright (C) 2018 Overkiz SAS |
| 6 |
* |
| 7 |
* Authors: Dorian Rocipon <[email protected]> |
| 8 |
* Kevin Carli <[email protected]> |
| 9 |
* Mickael Gardet <[email protected]> |
| 10 |
*/ |
| 11 |
/dts-v1/; |
| 12 |
#include "at91-kizbox3_common.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Overkiz KIZBOX3-HS"; |
| 16 |
compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; |
| 17 |
|
| 18 |
led-controller-1 { |
| 19 |
status = "okay"; |
| 20 |
|
| 21 |
led-1 { |
| 22 |
status = "okay"; |
| 23 |
}; |
| 24 |
|
| 25 |
led-2 { |
| 26 |
status = "okay"; |
| 27 |
}; |
| 28 |
|
| 29 |
led-3 { |
| 30 |
status = "okay"; |
| 31 |
}; |
| 32 |
|
| 33 |
led-4 { |
| 34 |
status = "okay"; |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
led-controller-2 { |
| 39 |
compatible = "gpio-leds"; |
| 40 |
pinctrl-names = "default"; |
| 41 |
pinctrl-0 = <&pinctrl_led_red |
| 42 |
&pinctrl_led_white>; |
| 43 |
status = "okay"; |
| 44 |
|
| 45 |
led-5 { |
| 46 |
label = "pio:red:user"; |
| 47 |
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; |
| 48 |
default-state = "off"; |
| 49 |
}; |
| 50 |
|
| 51 |
led-6 { |
| 52 |
label = "pio:white:user"; |
| 53 |
gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; |
| 54 |
default-state = "off"; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
gpio-keys { |
| 59 |
compatible = "gpio-keys"; |
| 60 |
pinctrl-names = "default" , "default", "default", |
| 61 |
"default", "default" ; |
| 62 |
pinctrl-0 = <&pinctrl_key_gpio_default>; |
| 63 |
pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>; |
| 64 |
pinctrl-2 = <&pinctrl_pio_io_boot |
| 65 |
&pinctrl_pio_io_reset |
| 66 |
&pinctrl_pio_io_test_radio>; |
| 67 |
pinctrl-3 = <&pinctrl_pio_zbe_test_radio |
| 68 |
&pinctrl_pio_zbe_rst>; |
| 69 |
pinctrl-4 = <&pinctrl_pio_input>; |
| 70 |
|
| 71 |
switch-1 { |
| 72 |
label = "SW1"; |
| 73 |
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; |
| 74 |
linux,code = <0x101>; |
| 75 |
wakeup-source; |
| 76 |
}; |
| 77 |
|
| 78 |
switch-2 { |
| 79 |
label = "SW2"; |
| 80 |
gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; |
| 81 |
linux,code = <0x102>; |
| 82 |
wakeup-source; |
| 83 |
}; |
| 84 |
|
| 85 |
switch-3 { |
| 86 |
label = "SW3"; |
| 87 |
gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; |
| 88 |
linux,code = <0x103>; |
| 89 |
wakeup-source; |
| 90 |
}; |
| 91 |
|
| 92 |
switch-7 { |
| 93 |
label = "SW7"; |
| 94 |
gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; |
| 95 |
linux,code = <0x107>; |
| 96 |
wakeup-source; |
| 97 |
}; |
| 98 |
|
| 99 |
switch-8 { |
| 100 |
label = "SW8"; |
| 101 |
gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; |
| 102 |
linux,code = <0x108>; |
| 103 |
wakeup-source; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
gpios { |
| 108 |
compatible = "gpio"; |
| 109 |
status = "okay"; |
| 110 |
|
| 111 |
rf_on { |
| 112 |
label = "rf on"; |
| 113 |
gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>; |
| 114 |
output; |
| 115 |
init-low; |
| 116 |
}; |
| 117 |
|
| 118 |
wifi_on { |
| 119 |
label = "wifi on"; |
| 120 |
gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>; |
| 121 |
output; |
| 122 |
init-low; |
| 123 |
}; |
| 124 |
|
| 125 |
zbe_test_radio { |
| 126 |
label = "zbe test radio"; |
| 127 |
gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>; |
| 128 |
output; |
| 129 |
init-low; |
| 130 |
}; |
| 131 |
|
| 132 |
zbe_rst { |
| 133 |
label = "zbe rst"; |
| 134 |
gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>; |
| 135 |
output; |
| 136 |
init-low; |
| 137 |
}; |
| 138 |
|
| 139 |
io_reset { |
| 140 |
label = "io reset"; |
| 141 |
gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>; |
| 142 |
output; |
| 143 |
init-low; |
| 144 |
}; |
| 145 |
|
| 146 |
io_test_radio { |
| 147 |
label = "io test radio"; |
| 148 |
gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>; |
| 149 |
output; |
| 150 |
init-low; |
| 151 |
}; |
| 152 |
|
| 153 |
io_boot_0 { |
| 154 |
label = "io boot 0"; |
| 155 |
gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>; |
| 156 |
output; |
| 157 |
init-low; |
| 158 |
}; |
| 159 |
|
| 160 |
io_boot_1 { |
| 161 |
label = "io boot 1"; |
| 162 |
gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>; |
| 163 |
output; |
| 164 |
init-low; |
| 165 |
}; |
| 166 |
|
| 167 |
verbose_bootloader { |
| 168 |
label = "verbose bootloader"; |
| 169 |
gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; |
| 170 |
input; |
| 171 |
}; |
| 172 |
|
| 173 |
nail_bed_detection { |
| 174 |
label = "nail bed detection"; |
| 175 |
gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>; |
| 176 |
input; |
| 177 |
}; |
| 178 |
|
| 179 |
id_usba { |
| 180 |
label = "id usba"; |
| 181 |
gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; |
| 182 |
input; |
| 183 |
}; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
&pioA { |
| 188 |
pinctrl_key_gpio_default: key_gpio_default { |
| 189 |
pinmux = <PIN_PA22__GPIO>, |
| 190 |
<PIN_PA24__GPIO>, |
| 191 |
<PIN_PA26__GPIO>, |
| 192 |
<PIN_PA29__GPIO>, |
| 193 |
<PIN_PA18__GPIO>; |
| 194 |
bias-disable; |
| 195 |
}; |
| 196 |
|
| 197 |
pinctrl_gpio { |
| 198 |
pinctrl_pio_rf: gpio_rf { |
| 199 |
pinmux = <PIN_PC19__GPIO>; |
| 200 |
bias-disable; |
| 201 |
}; |
| 202 |
pinctrl_pio_wifi: gpio_wifi { |
| 203 |
pinmux = <PIN_PC20__GPIO>; |
| 204 |
bias-disable; |
| 205 |
}; |
| 206 |
pinctrl_pio_io_boot: gpio_io_boot { |
| 207 |
pinmux = |
| 208 |
<PIN_PC11__GPIO>, |
| 209 |
<PIN_PC17__GPIO>; |
| 210 |
bias-disable; |
| 211 |
}; |
| 212 |
pinctrl_pio_io_test_radio: gpio_io_test_radio { |
| 213 |
pinmux = <PIN_PC9__GPIO>; |
| 214 |
bias-disable; |
| 215 |
}; |
| 216 |
pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio { |
| 217 |
pinmux = <PIN_PB21__GPIO>; |
| 218 |
bias-disable; |
| 219 |
}; |
| 220 |
pinctrl_pio_zbe_rst: gpio_zbe_rst { |
| 221 |
pinmux = <PIN_PB25__GPIO>; |
| 222 |
bias-disable; |
| 223 |
}; |
| 224 |
/* stm32 reset must be open drain (internal pull up) */ |
| 225 |
pinctrl_pio_io_reset: gpio_io_reset { |
| 226 |
pinmux = <PIN_PB30__GPIO>; |
| 227 |
bias-disable; |
| 228 |
drive-open-drain; |
| 229 |
output-low; |
| 230 |
}; |
| 231 |
pinctrl_pio_input: gpio_input { |
| 232 |
pinmux = |
| 233 |
<PIN_PB11__GPIO>, |
| 234 |
<PIN_PB12__GPIO>, |
| 235 |
<PIN_PC0__GPIO>; |
| 236 |
bias-disable; |
| 237 |
}; |
| 238 |
}; |
| 239 |
|
| 240 |
pinctrl_leds { |
| 241 |
pinctrl_led_red: led_red { |
| 242 |
pinmux = <PIN_PB1__GPIO>; |
| 243 |
bias-disable; |
| 244 |
}; |
| 245 |
pinctrl_led_white: led_white { |
| 246 |
pinmux = <PIN_PB8__GPIO>; |
| 247 |
bias-disable; |
| 248 |
}; |
| 249 |
}; |
| 250 |
}; |
| 251 |
|
| 252 |
&adc { |
| 253 |
status = "okay"; |
| 254 |
}; |
| 255 |
|
| 256 |
&uart0 { |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&uart1 { |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
&uart2 { |
| 265 |
status = "okay"; |
| 266 |
}; |
| 267 |
|
| 268 |
&uart3 { |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&uart4 { |
| 273 |
status = "okay"; |
| 274 |
}; |
| 275 |
|
| 276 |
&flx0 { |
| 277 |
status = "okay"; |
| 278 |
|
| 279 |
uart5: serial@200 { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
&flx3 { |
| 285 |
status = "okay"; |
| 286 |
uart8: serial@200 { |
| 287 |
status = "okay"; |
| 288 |
}; |
| 289 |
}; |
| 290 |
|
| 291 |
&flx4 { |
| 292 |
status = "okay"; |
| 293 |
|
| 294 |
i2c6: i2c@600 { |
| 295 |
status = "okay"; |
| 296 |
}; |
| 297 |
}; |
| 298 |
|
| 299 |
&usb0 { |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
&usb1 { |
| 304 |
status = "okay"; |
| 305 |
}; |
| 306 |
|
| 307 |
&usb2 { |
| 308 |
status = "okay"; |
| 309 |
}; |