| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <[email protected]> |
| 6 |
*/ |
| 7 |
#include "at91sam9g20.dtsi" |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
|
| 12 |
chosen { |
| 13 |
bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; |
| 14 |
stdout-path = "serial0:115200n8"; |
| 15 |
}; |
| 16 |
|
| 17 |
memory@20000000 { |
| 18 |
reg = <0x20000000 0x4000000>; |
| 19 |
}; |
| 20 |
|
| 21 |
clocks { |
| 22 |
slow_xtal { |
| 23 |
clock-frequency = <32768>; |
| 24 |
}; |
| 25 |
|
| 26 |
main_xtal { |
| 27 |
clock-frequency = <18432000>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
ahb { |
| 32 |
apb { |
| 33 |
pinctrl@fffff400 { |
| 34 |
board { |
| 35 |
pinctrl_pck0_as_mck: pck0_as_mck { |
| 36 |
atmel,pins = |
| 37 |
<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ |
| 38 |
}; |
| 39 |
|
| 40 |
}; |
| 41 |
|
| 42 |
usb1 { |
| 43 |
pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { |
| 44 |
atmel,pins = |
| 45 |
<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PC5 GPIO */ |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
mmc0_slot1 { |
| 50 |
pinctrl_board_mmc0_slot1: mmc0_slot1-board { |
| 51 |
atmel,pins = |
| 52 |
<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ |
| 53 |
}; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
dbgu: serial@fffff200 { |
| 58 |
status = "okay"; |
| 59 |
}; |
| 60 |
|
| 61 |
tcb0: timer@fffa0000 { |
| 62 |
timer@0 { |
| 63 |
compatible = "atmel,tcb-timer"; |
| 64 |
reg = <0>, <1>; |
| 65 |
}; |
| 66 |
|
| 67 |
timer@2 { |
| 68 |
compatible = "atmel,tcb-timer"; |
| 69 |
reg = <2>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
usart0: serial@fffb0000 { |
| 74 |
pinctrl-0 = |
| 75 |
<&pinctrl_usart0 |
| 76 |
&pinctrl_usart0_rts |
| 77 |
&pinctrl_usart0_cts |
| 78 |
&pinctrl_usart0_dtr_dsr |
| 79 |
&pinctrl_usart0_dcd |
| 80 |
&pinctrl_usart0_ri>; |
| 81 |
status = "okay"; |
| 82 |
}; |
| 83 |
|
| 84 |
usart1: serial@fffb4000 { |
| 85 |
status = "okay"; |
| 86 |
}; |
| 87 |
|
| 88 |
macb0: ethernet@fffc4000 { |
| 89 |
phy-mode = "rmii"; |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
usb1: gadget@fffa4000 { |
| 94 |
pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; |
| 95 |
pinctrl-names = "default"; |
| 96 |
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; |
| 97 |
status = "okay"; |
| 98 |
}; |
| 99 |
|
| 100 |
mmc0: mmc@fffa8000 { |
| 101 |
pinctrl-0 = < |
| 102 |
&pinctrl_board_mmc0_slot1 |
| 103 |
&pinctrl_mmc0_clk |
| 104 |
&pinctrl_mmc0_slot1_cmd_dat0 |
| 105 |
&pinctrl_mmc0_slot1_dat1_3>; |
| 106 |
pinctrl-names = "default"; |
| 107 |
status = "okay"; |
| 108 |
slot@1 { |
| 109 |
reg = <1>; |
| 110 |
bus-width = <4>; |
| 111 |
cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
ssc0: ssc@fffbc000 { |
| 116 |
status = "okay"; |
| 117 |
pinctrl-0 = <&pinctrl_ssc0_tx>; |
| 118 |
}; |
| 119 |
|
| 120 |
spi0: spi@fffc8000 { |
| 121 |
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; |
| 122 |
flash@1 { |
| 123 |
compatible = "atmel,at45", "atmel,dataflash"; |
| 124 |
spi-max-frequency = <50000000>; |
| 125 |
reg = <1>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
shdwc: poweroff@fffffd10 { |
| 130 |
atmel,wakeup-counter = <10>; |
| 131 |
atmel,wakeup-rtt-timer; |
| 132 |
}; |
| 133 |
|
| 134 |
rtc@fffffd20 { |
| 135 |
atmel,rtt-rtc-time-reg = <&gpbr 0x0>; |
| 136 |
status = "okay"; |
| 137 |
}; |
| 138 |
|
| 139 |
watchdog@fffffd40 { |
| 140 |
status = "okay"; |
| 141 |
}; |
| 142 |
|
| 143 |
gpbr: syscon@fffffd50 { |
| 144 |
status = "okay"; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
ebi: ebi@10000000 { |
| 149 |
status = "okay"; |
| 150 |
|
| 151 |
nand_controller: nand-controller { |
| 152 |
status = "okay"; |
| 153 |
pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; |
| 154 |
pinctrl-names = "default"; |
| 155 |
|
| 156 |
nand@3 { |
| 157 |
reg = <0x3 0x0 0x800000>; |
| 158 |
rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; |
| 159 |
cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; |
| 160 |
nand-bus-width = <8>; |
| 161 |
nand-ecc-mode = "soft"; |
| 162 |
nand-on-flash-bbt; |
| 163 |
label = "atmel_nand"; |
| 164 |
|
| 165 |
partitions { |
| 166 |
compatible = "fixed-partitions"; |
| 167 |
#address-cells = <1>; |
| 168 |
#size-cells = <1>; |
| 169 |
|
| 170 |
at91bootstrap@0 { |
| 171 |
label = "at91bootstrap"; |
| 172 |
reg = <0x0 0x20000>; |
| 173 |
}; |
| 174 |
|
| 175 |
barebox@20000 { |
| 176 |
label = "barebox"; |
| 177 |
reg = <0x20000 0x40000>; |
| 178 |
}; |
| 179 |
|
| 180 |
bareboxenv@60000 { |
| 181 |
label = "bareboxenv"; |
| 182 |
reg = <0x60000 0x20000>; |
| 183 |
}; |
| 184 |
|
| 185 |
bareboxenv2@80000 { |
| 186 |
label = "bareboxenv2"; |
| 187 |
reg = <0x80000 0x20000>; |
| 188 |
}; |
| 189 |
|
| 190 |
oftree@80000 { |
| 191 |
label = "oftree"; |
| 192 |
reg = <0xa0000 0x20000>; |
| 193 |
}; |
| 194 |
|
| 195 |
kernel@a0000 { |
| 196 |
label = "kernel"; |
| 197 |
reg = <0xc0000 0x400000>; |
| 198 |
}; |
| 199 |
|
| 200 |
rootfs@4a0000 { |
| 201 |
label = "rootfs"; |
| 202 |
reg = <0x4c0000 0x7800000>; |
| 203 |
}; |
| 204 |
|
| 205 |
data@7ca0000 { |
| 206 |
label = "data"; |
| 207 |
reg = <0x7cc0000 0x8340000>; |
| 208 |
}; |
| 209 |
}; |
| 210 |
}; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
usb0: usb@500000 { |
| 215 |
num-ports = <2>; |
| 216 |
status = "okay"; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
i2c-gpio-0 { |
| 221 |
status = "okay"; |
| 222 |
|
| 223 |
eeprom@50 { |
| 224 |
compatible = "atmel,24c512"; |
| 225 |
reg = <0x50>; |
| 226 |
vcc-supply = <®_3v3>; |
| 227 |
}; |
| 228 |
|
| 229 |
wm8731: wm8731@1b { |
| 230 |
compatible = "wm8731"; |
| 231 |
reg = <0x1b>; |
| 232 |
|
| 233 |
/* PCK0 at 12MHz */ |
| 234 |
clocks = <&pmc PMC_TYPE_SYSTEM 8>; |
| 235 |
clock-names = "mclk"; |
| 236 |
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; |
| 237 |
assigned-clock-rates = <12000000>; |
| 238 |
|
| 239 |
HPVDD-supply = <&vcc_dac>; |
| 240 |
AVDD-supply = <&vcc_dac>; |
| 241 |
DCVDD-supply = <®_3v3>; |
| 242 |
DBVDD-supply = <®_3v3>; |
| 243 |
}; |
| 244 |
}; |
| 245 |
|
| 246 |
gpio-keys { |
| 247 |
compatible = "gpio-keys"; |
| 248 |
|
| 249 |
button-3 { |
| 250 |
label = "Button 3"; |
| 251 |
gpios = <&pioA 30 GPIO_ACTIVE_LOW>; |
| 252 |
linux,code = <0x103>; |
| 253 |
wakeup-source; |
| 254 |
}; |
| 255 |
|
| 256 |
button-4 { |
| 257 |
label = "Button 4"; |
| 258 |
gpios = <&pioA 31 GPIO_ACTIVE_LOW>; |
| 259 |
linux,code = <KEY_PROG1>; |
| 260 |
wakeup-source; |
| 261 |
}; |
| 262 |
}; |
| 263 |
|
| 264 |
sound { |
| 265 |
compatible = "atmel,at91sam9g20ek-wm8731-audio"; |
| 266 |
pinctrl-names = "default"; |
| 267 |
pinctrl-0 = <&pinctrl_pck0_as_mck>; |
| 268 |
|
| 269 |
atmel,model = "wm8731 @ AT91SAMG20EK"; |
| 270 |
|
| 271 |
atmel,audio-routing = |
| 272 |
"Ext Spk", "LHPOUT", |
| 273 |
"Int Mic", "MICIN"; |
| 274 |
|
| 275 |
atmel,ssc-controller = <&ssc0>; |
| 276 |
atmel,audio-codec = <&wm8731>; |
| 277 |
}; |
| 278 |
|
| 279 |
reg_5v: fixedregulator0 { |
| 280 |
compatible = "regulator-fixed"; |
| 281 |
regulator-name = "5V"; |
| 282 |
regulator-min-microvolt = <5000000>; |
| 283 |
regulator-max-microvolt = <5000000>; |
| 284 |
}; |
| 285 |
|
| 286 |
reg_3v3: fixedregulator1 { |
| 287 |
compatible = "regulator-fixed"; |
| 288 |
regulator-name = "3V3"; |
| 289 |
vin-supply = <®_5v>; |
| 290 |
regulator-min-microvolt = <3300000>; |
| 291 |
regulator-max-microvolt = <3300000>; |
| 292 |
}; |
| 293 |
|
| 294 |
reg_1v: fixedregulator2 { |
| 295 |
compatible = "regulator-fixed"; |
| 296 |
regulator-name = "1V"; |
| 297 |
vin-supply = <®_5v>; |
| 298 |
regulator-min-microvolt = <1000000>; |
| 299 |
regulator-max-microvolt = <1000000>; |
| 300 |
}; |
| 301 |
|
| 302 |
vcc_dac: fixedregulator3 { |
| 303 |
compatible = "regulator-fixed"; |
| 304 |
regulator-name = "VCC_DAC"; |
| 305 |
vin-supply = <®_3v3>; |
| 306 |
regulator-min-microvolt = <3300000>; |
| 307 |
regulator-max-microvolt = <3300000>; |
| 308 |
}; |
| 309 |
}; |