| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Atmel, |
| 6 |
* 2012 Nicolas Ferre <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
/ { |
| 10 |
memory@20000000 { |
| 11 |
reg = <0x20000000 0x8000000>; |
| 12 |
}; |
| 13 |
|
| 14 |
clocks { |
| 15 |
slow_xtal { |
| 16 |
clock-frequency = <32768>; |
| 17 |
}; |
| 18 |
|
| 19 |
main_xtal { |
| 20 |
clock-frequency = <12000000>; |
| 21 |
}; |
| 22 |
}; |
| 23 |
|
| 24 |
ahb { |
| 25 |
apb { |
| 26 |
tcb0: timer@f8008000 { |
| 27 |
timer@0 { |
| 28 |
compatible = "atmel,tcb-timer"; |
| 29 |
reg = <0>; |
| 30 |
}; |
| 31 |
|
| 32 |
timer@1 { |
| 33 |
compatible = "atmel,tcb-timer"; |
| 34 |
reg = <1>; |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
pinctrl@fffff400 { |
| 39 |
1wire_cm { |
| 40 |
pinctrl_1wire_cm: 1wire_cm-0 { |
| 41 |
atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ |
| 42 |
}; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
rtc@fffffeb0 { |
| 47 |
status = "okay"; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
ebi: ebi@10000000 { |
| 52 |
pinctrl-0 = <&pinctrl_ebi_addr_nand |
| 53 |
&pinctrl_ebi_data_0_7>; |
| 54 |
pinctrl-names = "default"; |
| 55 |
status = "okay"; |
| 56 |
|
| 57 |
nand_controller: nand-controller { |
| 58 |
status = "okay"; |
| 59 |
pinctrl-0 = <&pinctrl_nand_oe_we |
| 60 |
&pinctrl_nand_cs |
| 61 |
&pinctrl_nand_rb>; |
| 62 |
pinctrl-names = "default"; |
| 63 |
|
| 64 |
nand@3 { |
| 65 |
reg = <0x3 0x0 0x800000>; |
| 66 |
rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; |
| 67 |
cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; |
| 68 |
nand-bus-width = <8>; |
| 69 |
nand-ecc-mode = "hw"; |
| 70 |
nand-ecc-strength = <2>; |
| 71 |
nand-ecc-step-size = <512>; |
| 72 |
nand-on-flash-bbt; |
| 73 |
label = "atmel_nand"; |
| 74 |
|
| 75 |
partitions { |
| 76 |
compatible = "fixed-partitions"; |
| 77 |
#address-cells = <1>; |
| 78 |
#size-cells = <1>; |
| 79 |
|
| 80 |
at91bootstrap@0 { |
| 81 |
label = "at91bootstrap"; |
| 82 |
reg = <0x0 0x40000>; |
| 83 |
}; |
| 84 |
|
| 85 |
uboot@40000 { |
| 86 |
label = "u-boot"; |
| 87 |
reg = <0x40000 0xc0000>; |
| 88 |
}; |
| 89 |
|
| 90 |
ubootenvred@100000 { |
| 91 |
label = "U-Boot Env Redundant"; |
| 92 |
reg = <0x100000 0x40000>; |
| 93 |
}; |
| 94 |
|
| 95 |
ubootenv@140000 { |
| 96 |
label = "U-Boot Env"; |
| 97 |
reg = <0x140000 0x40000>; |
| 98 |
}; |
| 99 |
|
| 100 |
dtb@180000 { |
| 101 |
label = "device tree"; |
| 102 |
reg = <0x180000 0x80000>; |
| 103 |
}; |
| 104 |
|
| 105 |
kernel@200000 { |
| 106 |
label = "kernel"; |
| 107 |
reg = <0x200000 0x600000>; |
| 108 |
}; |
| 109 |
|
| 110 |
rootfs@800000 { |
| 111 |
label = "rootfs"; |
| 112 |
reg = <0x800000 0x0f800000>; |
| 113 |
}; |
| 114 |
}; |
| 115 |
}; |
| 116 |
}; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
leds { |
| 121 |
compatible = "gpio-leds"; |
| 122 |
|
| 123 |
led-pb18 { |
| 124 |
label = "pb18"; |
| 125 |
gpios = <&pioB 18 GPIO_ACTIVE_LOW>; |
| 126 |
linux,default-trigger = "heartbeat"; |
| 127 |
}; |
| 128 |
|
| 129 |
led-pd21 { |
| 130 |
label = "pd21"; |
| 131 |
gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
1wire_cm { |
| 136 |
compatible = "w1-gpio"; |
| 137 |
gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; |
| 138 |
linux,open-drain; |
| 139 |
pinctrl-names = "default"; |
| 140 |
pinctrl-0 = <&pinctrl_1wire_cm>; |
| 141 |
status = "okay"; |
| 142 |
}; |
| 143 |
|
| 144 |
}; |