| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
/* |
| 3 |
* at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet |
| 4 |
* Development System board. |
| 5 |
* |
| 6 |
* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries |
| 7 |
* |
| 8 |
* Author: Jerry Ray <[email protected]> |
| 9 |
*/ |
| 10 |
/dts-v1/; |
| 11 |
#include "sama5d36.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "SAMA5D3 Ethernet Development System"; |
| 15 |
compatible = "microchip,sama5d3-eds", "atmel,sama5d36", |
| 16 |
"atmel,sama5d3", "atmel,sama5"; |
| 17 |
|
| 18 |
chosen { |
| 19 |
stdout-path = "serial0:115200n8"; |
| 20 |
}; |
| 21 |
|
| 22 |
gpio-keys { |
| 23 |
compatible = "gpio-keys"; |
| 24 |
|
| 25 |
pinctrl-names = "default"; |
| 26 |
pinctrl-0 = <&pinctrl_key_gpio>; |
| 27 |
|
| 28 |
button-3 { |
| 29 |
label = "PB_USER"; |
| 30 |
gpios = <&pioE 29 GPIO_ACTIVE_LOW>; |
| 31 |
linux,code = <0x104>; |
| 32 |
wakeup-source; |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
memory@20000000 { |
| 37 |
reg = <0x20000000 0x10000000>; |
| 38 |
}; |
| 39 |
|
| 40 |
vcc_3v3_reg: regulator-1 { |
| 41 |
compatible = "regulator-fixed"; |
| 42 |
regulator-name = "VCC_3V3"; |
| 43 |
regulator-min-microvolt = <3300000>; |
| 44 |
regulator-max-microvolt = <3300000>; |
| 45 |
regulator-always-on; |
| 46 |
}; |
| 47 |
|
| 48 |
vcc_2v5_reg: regulator-2 { |
| 49 |
compatible = "regulator-fixed"; |
| 50 |
regulator-name = "VCC_2V5"; |
| 51 |
regulator-min-microvolt = <2500000>; |
| 52 |
regulator-max-microvolt = <2500000>; |
| 53 |
regulator-always-on; |
| 54 |
vin-supply = <&vcc_3v3_reg>; |
| 55 |
}; |
| 56 |
|
| 57 |
vcc_1v8_reg: regulator-3 { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "VCC_1V8"; |
| 60 |
regulator-min-microvolt = <1800000>; |
| 61 |
regulator-max-microvolt = <1800000>; |
| 62 |
regulator-always-on; |
| 63 |
vin-supply = <&vcc_3v3_reg>; |
| 64 |
}; |
| 65 |
|
| 66 |
vcc_1v2_reg: regulator-4 { |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
regulator-name = "VCC_1V2"; |
| 69 |
regulator-min-microvolt = <1200000>; |
| 70 |
regulator-max-microvolt = <1200000>; |
| 71 |
regulator-always-on; |
| 72 |
}; |
| 73 |
|
| 74 |
vcc_mmc0_reg: regulator-5 { |
| 75 |
compatible = "regulator-fixed"; |
| 76 |
regulator-name = "mmc0-card-supply"; |
| 77 |
regulator-min-microvolt = <3300000>; |
| 78 |
regulator-max-microvolt = <3300000>; |
| 79 |
regulator-always-on; |
| 80 |
pinctrl-names = "default"; |
| 81 |
pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>; |
| 82 |
gpio = <&pioE 2 GPIO_ACTIVE_LOW>; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
&can0 { |
| 87 |
status = "okay"; |
| 88 |
}; |
| 89 |
|
| 90 |
&dbgu { |
| 91 |
status = "okay"; |
| 92 |
}; |
| 93 |
|
| 94 |
&ebi { |
| 95 |
pinctrl-0 = <&pinctrl_ebi_nand_addr>; |
| 96 |
pinctrl-names = "default"; |
| 97 |
status = "okay"; |
| 98 |
|
| 99 |
nand_controller: nand-controller { |
| 100 |
status = "okay"; |
| 101 |
|
| 102 |
nand@3 { |
| 103 |
reg = <0x3 0x0 0x2>; |
| 104 |
atmel,rb = <0>; |
| 105 |
nand-bus-width = <8>; |
| 106 |
nand-ecc-mode = "hw"; |
| 107 |
nand-ecc-strength = <4>; |
| 108 |
nand-ecc-step-size = <512>; |
| 109 |
nand-on-flash-bbt; |
| 110 |
label = "atmel_nand"; |
| 111 |
|
| 112 |
partitions { |
| 113 |
compatible = "fixed-partitions"; |
| 114 |
#address-cells = <1>; |
| 115 |
#size-cells = <1>; |
| 116 |
|
| 117 |
at91bootstrap@0 { |
| 118 |
label = "at91bootstrap"; |
| 119 |
reg = <0x0 0x40000>; |
| 120 |
}; |
| 121 |
|
| 122 |
bootloader@40000 { |
| 123 |
label = "bootloader"; |
| 124 |
reg = <0x40000 0xc0000>; |
| 125 |
}; |
| 126 |
|
| 127 |
bootloaderenvred@100000 { |
| 128 |
label = "bootloader env redundant"; |
| 129 |
reg = <0x100000 0x40000>; |
| 130 |
}; |
| 131 |
|
| 132 |
bootloaderenv@140000 { |
| 133 |
label = "bootloader env"; |
| 134 |
reg = <0x140000 0x40000>; |
| 135 |
}; |
| 136 |
|
| 137 |
dtb@180000 { |
| 138 |
label = "device tree"; |
| 139 |
reg = <0x180000 0x80000>; |
| 140 |
}; |
| 141 |
|
| 142 |
kernel@200000 { |
| 143 |
label = "kernel"; |
| 144 |
reg = <0x200000 0x600000>; |
| 145 |
}; |
| 146 |
|
| 147 |
rootfs@800000 { |
| 148 |
label = "rootfs"; |
| 149 |
reg = <0x800000 0x0f800000>; |
| 150 |
}; |
| 151 |
}; |
| 152 |
}; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
&i2c0 { |
| 157 |
pinctrl-0 = <&pinctrl_i2c0_pu>; |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
&i2c1 { |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
&i2c2 { |
| 166 |
pinctrl-0 = <&pinctrl_i2c2_pu>; |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
&main_xtal { |
| 171 |
clock-frequency = <12000000>; |
| 172 |
}; |
| 173 |
|
| 174 |
&mmc0 { |
| 175 |
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 |
| 176 |
&pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; |
| 177 |
vmmc-supply = <&vcc_mmc0_reg>; |
| 178 |
vqmmc-supply = <&vcc_3v3_reg>; |
| 179 |
status = "okay"; |
| 180 |
slot@0 { |
| 181 |
reg = <0>; |
| 182 |
bus-width = <8>; |
| 183 |
cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
&pinctrl { |
| 188 |
board { |
| 189 |
pinctrl_i2c0_pu: i2c0-pu { |
| 190 |
atmel,pins = |
| 191 |
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 192 |
<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; |
| 193 |
}; |
| 194 |
|
| 195 |
pinctrl_i2c2_pu: i2c2-pu { |
| 196 |
atmel,pins = |
| 197 |
<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, |
| 198 |
<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; |
| 199 |
}; |
| 200 |
|
| 201 |
pinctrl_key_gpio: key-gpio-0 { |
| 202 |
atmel,pins = |
| 203 |
<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 204 |
}; |
| 205 |
|
| 206 |
pinctrl_mmc0_cd: mmc0-cd { |
| 207 |
atmel,pins = |
| 208 |
<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 209 |
}; |
| 210 |
|
| 211 |
/* Reserved for reset signal to the RGMII connector. */ |
| 212 |
pinctrl_rgmii_rstn: rgmii-rstn { |
| 213 |
atmel,pins = |
| 214 |
<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 215 |
}; |
| 216 |
|
| 217 |
/* Reserved for an interrupt line from the RMII and RGMII connectors. */ |
| 218 |
pinctrl_spi_irqn: spi-irqn { |
| 219 |
atmel,pins = |
| 220 |
<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 221 |
}; |
| 222 |
|
| 223 |
pinctrl_spi0_cs: spi0-cs-default { |
| 224 |
atmel,pins = |
| 225 |
<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 226 |
AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 227 |
}; |
| 228 |
|
| 229 |
pinctrl_spi1_cs: spi1-cs-default { |
| 230 |
atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 231 |
AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 232 |
}; |
| 233 |
|
| 234 |
pinctrl_usba_vbus: usba-vbus { |
| 235 |
atmel,pins = |
| 236 |
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 237 |
}; |
| 238 |
|
| 239 |
pinctrl_usb_default: usb-default { |
| 240 |
atmel,pins = |
| 241 |
<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 242 |
AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 243 |
}; |
| 244 |
|
| 245 |
/* Reserved for VBUS fault interrupt. */ |
| 246 |
pinctrl_vbusfault_irqn: vbusfault-irqn { |
| 247 |
atmel,pins = |
| 248 |
<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; |
| 249 |
}; |
| 250 |
|
| 251 |
pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default { |
| 252 |
atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; |
| 253 |
}; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
&slow_xtal { |
| 258 |
clock-frequency = <32768>; |
| 259 |
}; |
| 260 |
|
| 261 |
&spi0 { |
| 262 |
pinctrl-names = "default", "cs"; |
| 263 |
pinctrl-1 = <&pinctrl_spi0_cs>; |
| 264 |
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; |
| 265 |
status = "okay"; |
| 266 |
}; |
| 267 |
|
| 268 |
&spi1 { |
| 269 |
pinctrl-names = "default", "cs"; |
| 270 |
pinctrl-1 = <&pinctrl_spi1_cs>; |
| 271 |
cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>; |
| 272 |
status = "okay"; |
| 273 |
}; |
| 274 |
|
| 275 |
&tcb0 { |
| 276 |
timer0: timer@0 { |
| 277 |
compatible = "atmel,tcb-timer"; |
| 278 |
reg = <0>; |
| 279 |
}; |
| 280 |
|
| 281 |
timer1: timer@1 { |
| 282 |
compatible = "atmel,tcb-timer"; |
| 283 |
reg = <1>; |
| 284 |
}; |
| 285 |
}; |
| 286 |
|
| 287 |
&usb0 { /* USB Device port with VBUS detection. */ |
| 288 |
atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; |
| 289 |
pinctrl-names = "default"; |
| 290 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 291 |
status = "okay"; |
| 292 |
}; |
| 293 |
|
| 294 |
&usb1 { /* 3-port Host. First port is unused. */ |
| 295 |
atmel,vbus-gpio = <0 |
| 296 |
&pioE 3 GPIO_ACTIVE_HIGH |
| 297 |
&pioE 4 GPIO_ACTIVE_HIGH |
| 298 |
>; |
| 299 |
num-ports = <3>; |
| 300 |
pinctrl-names = "default"; |
| 301 |
pinctrl-0 = <&pinctrl_usb_default>; |
| 302 |
status = "okay"; |
| 303 |
}; |
| 304 |
|
| 305 |
&usb2 { |
| 306 |
status = "okay"; |
| 307 |
}; |