| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK |
| 4 |
* |
| 5 |
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries |
| 6 |
* |
| 7 |
* Author: Nicolas Ferre <[email protected]> |
| 8 |
*/ |
| 9 |
/dts-v1/; |
| 10 |
#include "at91-sama5d27_wlsom1.dtsi" |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Microchip SAMA5D27 WLSOM1 EK"; |
| 15 |
compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &uart0; /* DBGU */ |
| 19 |
serial1 = &uart6; /* BT */ |
| 20 |
serial2 = &uart5; /* mikro BUS 2 */ |
| 21 |
serial3 = &uart3; /* mikro BUS 1 */ |
| 22 |
i2c1 = &i2c1; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
stdout-path = "serial0:115200n8"; |
| 27 |
}; |
| 28 |
|
| 29 |
gpio-keys { |
| 30 |
compatible = "gpio-keys"; |
| 31 |
|
| 32 |
pinctrl-names = "default"; |
| 33 |
pinctrl-0 = <&pinctrl_key_gpio_default>; |
| 34 |
|
| 35 |
button-1 { |
| 36 |
label = "USER BUTTON"; |
| 37 |
gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; |
| 38 |
linux,code = <KEY_PROG1>; |
| 39 |
wakeup-source; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
leds { |
| 44 |
compatible = "gpio-leds"; |
| 45 |
pinctrl-names = "default"; |
| 46 |
pinctrl-0 = <&pinctrl_led_gpio_default>; |
| 47 |
status = "okay"; |
| 48 |
|
| 49 |
led-red { |
| 50 |
label = "red"; |
| 51 |
gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>; |
| 52 |
}; |
| 53 |
|
| 54 |
led-green { |
| 55 |
label = "green"; |
| 56 |
gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>; |
| 57 |
}; |
| 58 |
|
| 59 |
led-blue { |
| 60 |
label = "blue"; |
| 61 |
gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>; |
| 62 |
linux,default-trigger = "heartbeat"; |
| 63 |
}; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
&adc { |
| 68 |
vddana-supply = <&vdd_3v3>; |
| 69 |
vref-supply = <&vdd_3v3>; |
| 70 |
pinctrl-names = "default"; |
| 71 |
pinctrl-0 = <&pinctrl_adc_default>; |
| 72 |
status = "okay"; |
| 73 |
}; |
| 74 |
|
| 75 |
&flx0 { |
| 76 |
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; |
| 77 |
status = "okay"; |
| 78 |
|
| 79 |
uart5: serial@200 { |
| 80 |
pinctrl-0 = <&pinctrl_flx0_default>; |
| 81 |
pinctrl-names = "default"; |
| 82 |
atmel,use-dma-rx; |
| 83 |
atmel,use-dma-tx; |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&flx1 { |
| 89 |
status = "okay"; |
| 90 |
|
| 91 |
uart6: serial@200 { |
| 92 |
atmel,use-dma-rx; |
| 93 |
atmel,use-dma-tx; |
| 94 |
status = "okay"; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
&macb0 { |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
&pioA { |
| 103 |
/* |
| 104 |
* There is no real pinmux for ADC, if the pin |
| 105 |
* is not requested by another peripheral then |
| 106 |
* the muxing is done when channel is enabled. |
| 107 |
* Requesting pins for ADC is GPIO is |
| 108 |
* encouraged to prevent conflicts and to |
| 109 |
* disable bias in order to be in the same |
| 110 |
* state when the pin is not muxed to the adc. |
| 111 |
*/ |
| 112 |
pinctrl_adc_default: adc_default { |
| 113 |
pinmux = <PIN_PD25__GPIO>, |
| 114 |
<PIN_PD26__GPIO>; |
| 115 |
bias-disable; |
| 116 |
}; |
| 117 |
|
| 118 |
pinctrl_flx0_default: flx0_usart_default { |
| 119 |
pinmux = <PIN_PB28__FLEXCOM0_IO0>, |
| 120 |
<PIN_PB29__FLEXCOM0_IO1>; |
| 121 |
bias-disable; |
| 122 |
}; |
| 123 |
|
| 124 |
pinctrl_key_gpio_default: key_gpio_default { |
| 125 |
pinmux = <PIN_PB2__GPIO>; |
| 126 |
bias-pull-up; |
| 127 |
}; |
| 128 |
|
| 129 |
pinctrl_led_gpio_default: led_gpio_default { |
| 130 |
pinmux = <PIN_PA6__GPIO>, |
| 131 |
<PIN_PA7__GPIO>, |
| 132 |
<PIN_PA8__GPIO>; |
| 133 |
bias-pull-down; |
| 134 |
}; |
| 135 |
|
| 136 |
pinctrl_sdmmc0_default: sdmmc0_default { |
| 137 |
cmd_data { |
| 138 |
pinmux = <PIN_PA1__SDMMC0_CMD>, |
| 139 |
<PIN_PA2__SDMMC0_DAT0>, |
| 140 |
<PIN_PA3__SDMMC0_DAT1>, |
| 141 |
<PIN_PA4__SDMMC0_DAT2>, |
| 142 |
<PIN_PA5__SDMMC0_DAT3>; |
| 143 |
bias-disable; |
| 144 |
}; |
| 145 |
|
| 146 |
ck_cd_vddsel { |
| 147 |
pinmux = <PIN_PA0__SDMMC0_CK>, |
| 148 |
<PIN_PA11__SDMMC0_VDDSEL>, |
| 149 |
<PIN_PA12__SDMMC0_WP>, |
| 150 |
<PIN_PA13__SDMMC0_CD>; |
| 151 |
bias-disable; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
pinctrl_uart0_default: uart0_default { |
| 156 |
pinmux = <PIN_PB26__URXD0>, |
| 157 |
<PIN_PB27__UTXD0>; |
| 158 |
bias-disable; |
| 159 |
}; |
| 160 |
|
| 161 |
pinctrl_uart3_default: uart3_default { |
| 162 |
pinmux = <PIN_PB11__URXD3>, |
| 163 |
<PIN_PB12__UTXD3>; |
| 164 |
bias-disable; |
| 165 |
}; |
| 166 |
|
| 167 |
pinctrl_pwm0_default: pwm0_default { |
| 168 |
pinmux = <PIN_PA31__PWML0>, |
| 169 |
<PIN_PA30__PWMH0>; |
| 170 |
bias-disable; |
| 171 |
}; |
| 172 |
|
| 173 |
pinctrl_usb_default: usb_default { |
| 174 |
pinmux = <PIN_PA10__GPIO>; |
| 175 |
bias-disable; |
| 176 |
}; |
| 177 |
|
| 178 |
pinctrl_usba_vbus: usba_vbus { |
| 179 |
pinmux = <PIN_PA16__GPIO>; |
| 180 |
bias-disable; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
&pwm0 { |
| 185 |
pinctrl-names = "default"; |
| 186 |
pinctrl-0 = <&pinctrl_pwm0_default>; |
| 187 |
status = "okay"; |
| 188 |
}; |
| 189 |
|
| 190 |
&qspi1 { |
| 191 |
status = "okay"; |
| 192 |
|
| 193 |
qspi1_flash: flash@0 { |
| 194 |
status = "okay"; |
| 195 |
}; |
| 196 |
}; |
| 197 |
|
| 198 |
&sdmmc0 { |
| 199 |
bus-width = <4>; |
| 200 |
no-1-8-v; |
| 201 |
pinctrl-names = "default"; |
| 202 |
pinctrl-0 = <&pinctrl_sdmmc0_default>; |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&shutdown_controller { |
| 207 |
debounce-delay-us = <976>; |
| 208 |
atmel,wakeup-rtc-timer; |
| 209 |
|
| 210 |
input@0 { |
| 211 |
reg = <0>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
&tcb0 { |
| 216 |
timer0: timer@0 { |
| 217 |
compatible = "atmel,tcb-timer"; |
| 218 |
reg = <0>; |
| 219 |
}; |
| 220 |
|
| 221 |
timer1: timer@1 { |
| 222 |
compatible = "atmel,tcb-timer"; |
| 223 |
reg = <1>; |
| 224 |
}; |
| 225 |
}; |
| 226 |
|
| 227 |
&uart0 { |
| 228 |
pinctrl-names = "default"; |
| 229 |
pinctrl-0 = <&pinctrl_uart0_default>; |
| 230 |
atmel,use-dma-rx; |
| 231 |
atmel,use-dma-tx; |
| 232 |
status = "okay"; |
| 233 |
}; |
| 234 |
|
| 235 |
&uart3 { |
| 236 |
pinctrl-names = "default"; |
| 237 |
pinctrl-0 = <&pinctrl_uart3_default>; |
| 238 |
atmel,use-dma-rx; |
| 239 |
atmel,use-dma-tx; |
| 240 |
status = "okay"; |
| 241 |
}; |
| 242 |
|
| 243 |
&usb0 { |
| 244 |
atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>; |
| 245 |
pinctrl-names = "default"; |
| 246 |
pinctrl-0 = <&pinctrl_usba_vbus>; |
| 247 |
status = "okay"; |
| 248 |
}; |
| 249 |
|
| 250 |
&usb1 { |
| 251 |
num-ports = <3>; |
| 252 |
atmel,vbus-gpio = <0 |
| 253 |
&pioA PIN_PA10 GPIO_ACTIVE_HIGH |
| 254 |
0 |
| 255 |
>; |
| 256 |
pinctrl-names = "default"; |
| 257 |
pinctrl-0 = <&pinctrl_usb_default>; |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&usb2 { |
| 262 |
phy_type = "hsic"; |
| 263 |
status = "okay"; |
| 264 |
}; |
| 265 |
|
| 266 |
&watchdog { |
| 267 |
status = "okay"; |
| 268 |
}; |
| 269 |
|