| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Microchip |
| 6 |
* Alexandre Belloni <[email protected]> |
| 7 |
*/ |
| 8 |
/dts-v1/; |
| 9 |
#include "at91sam9rl.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Atmel at91sam9rlek"; |
| 13 |
compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9"; |
| 14 |
|
| 15 |
chosen { |
| 16 |
bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw"; |
| 17 |
stdout-path = "serial0:115200n8"; |
| 18 |
}; |
| 19 |
|
| 20 |
memory@20000000 { |
| 21 |
reg = <0x20000000 0x4000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
clocks { |
| 25 |
slow_xtal { |
| 26 |
clock-frequency = <32768>; |
| 27 |
}; |
| 28 |
|
| 29 |
main_xtal { |
| 30 |
clock-frequency = <12000000>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
ahb { |
| 35 |
fb0: fb@500000 { |
| 36 |
display = <&display0>; |
| 37 |
status = "okay"; |
| 38 |
|
| 39 |
display0: panel { |
| 40 |
bits-per-pixel = <16>; |
| 41 |
atmel,lcdcon-backlight; |
| 42 |
atmel,dmacon = <0x1>; |
| 43 |
atmel,lcdcon2 = <0x80008002>; |
| 44 |
atmel,guard-time = <1>; |
| 45 |
atmel,lcd-wiring-mode = "RGB"; |
| 46 |
|
| 47 |
display-timings { |
| 48 |
native-mode = <&timing0>; |
| 49 |
timing0: timing0 { |
| 50 |
clock-frequency = <4965000>; |
| 51 |
hactive = <240>; |
| 52 |
vactive = <320>; |
| 53 |
hback-porch = <1>; |
| 54 |
hfront-porch = <33>; |
| 55 |
vback-porch = <1>; |
| 56 |
vfront-porch = <0>; |
| 57 |
hsync-len = <5>; |
| 58 |
vsync-len = <1>; |
| 59 |
hsync-active = <1>; |
| 60 |
vsync-active = <1>; |
| 61 |
}; |
| 62 |
}; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
ebi: ebi@10000000 { |
| 67 |
pinctrl-0 = <&pinctrl_ebi_addr_nand>; |
| 68 |
pinctrl-names = "default"; |
| 69 |
status = "okay"; |
| 70 |
|
| 71 |
nand_controller: nand-controller { |
| 72 |
status = "okay"; |
| 73 |
pinctrl-0 = <&pinctrl_nand_oe_we |
| 74 |
&pinctrl_nand_cs |
| 75 |
&pinctrl_nand_rb>; |
| 76 |
pinctrl-names = "default"; |
| 77 |
|
| 78 |
nand@3 { |
| 79 |
reg = <0x3 0x0 0x800000>; |
| 80 |
rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; |
| 81 |
cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; |
| 82 |
nand-bus-width = <8>; |
| 83 |
nand-ecc-mode = "soft"; |
| 84 |
nand-on-flash-bbt; |
| 85 |
label = "atmel_nand"; |
| 86 |
|
| 87 |
partitions { |
| 88 |
compatible = "fixed-partitions"; |
| 89 |
#address-cells = <1>; |
| 90 |
#size-cells = <1>; |
| 91 |
|
| 92 |
at91bootstrap@0 { |
| 93 |
label = "at91bootstrap"; |
| 94 |
reg = <0x0 0x40000>; |
| 95 |
}; |
| 96 |
|
| 97 |
bootloader@40000 { |
| 98 |
label = "bootloader"; |
| 99 |
reg = <0x40000 0x80000>; |
| 100 |
}; |
| 101 |
|
| 102 |
bootloaderenv@c0000 { |
| 103 |
label = "bootloader env"; |
| 104 |
reg = <0xc0000 0xc0000>; |
| 105 |
}; |
| 106 |
|
| 107 |
dtb@180000 { |
| 108 |
label = "device tree"; |
| 109 |
reg = <0x180000 0x80000>; |
| 110 |
}; |
| 111 |
|
| 112 |
kernel@200000 { |
| 113 |
label = "kernel"; |
| 114 |
reg = <0x200000 0x600000>; |
| 115 |
}; |
| 116 |
|
| 117 |
rootfs@800000 { |
| 118 |
label = "rootfs"; |
| 119 |
reg = <0x800000 0x0f800000>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
}; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
apb { |
| 127 |
tcb0: timer@fffa0000 { |
| 128 |
timer@0 { |
| 129 |
compatible = "atmel,tcb-timer"; |
| 130 |
reg = <0>, <1>; |
| 131 |
}; |
| 132 |
|
| 133 |
timer@2 { |
| 134 |
compatible = "atmel,tcb-timer"; |
| 135 |
reg = <2>; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
mmc0: mmc@fffa4000 { |
| 140 |
pinctrl-0 = < |
| 141 |
&pinctrl_board_mmc0 |
| 142 |
&pinctrl_mmc0_clk |
| 143 |
&pinctrl_mmc0_slot0_cmd_dat0 |
| 144 |
&pinctrl_mmc0_slot0_dat1_3>; |
| 145 |
status = "okay"; |
| 146 |
slot@0 { |
| 147 |
reg = <0>; |
| 148 |
bus-width = <4>; |
| 149 |
cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
usart0: serial@fffb0000 { |
| 154 |
pinctrl-0 = < |
| 155 |
&pinctrl_usart0 |
| 156 |
&pinctrl_usart0_rts |
| 157 |
&pinctrl_usart0_cts>; |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
adc0: adc@fffd0000 { |
| 162 |
pinctrl-names = "default"; |
| 163 |
pinctrl-0 = < |
| 164 |
&pinctrl_adc0_ad0 |
| 165 |
&pinctrl_adc0_ad1 |
| 166 |
&pinctrl_adc0_ad2 |
| 167 |
&pinctrl_adc0_ad3 |
| 168 |
&pinctrl_adc0_ad4 |
| 169 |
&pinctrl_adc0_ad5 |
| 170 |
&pinctrl_adc0_adtrg>; |
| 171 |
atmel,adc-ts-wires = <4>; |
| 172 |
status = "okay"; |
| 173 |
}; |
| 174 |
|
| 175 |
usb0: gadget@fffd4000 { |
| 176 |
atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>; |
| 177 |
status = "okay"; |
| 178 |
}; |
| 179 |
|
| 180 |
spi0: spi@fffcc000 { |
| 181 |
status = "okay"; |
| 182 |
cs-gpios = <&pioA 28 0>, <0>, <0>, <0>; |
| 183 |
flash@0 { |
| 184 |
compatible = "atmel,at45", "atmel,dataflash"; |
| 185 |
spi-max-frequency = <15000000>; |
| 186 |
reg = <0>; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
pwm0: pwm@fffc8000 { |
| 191 |
status = "okay"; |
| 192 |
|
| 193 |
pinctrl-names = "default"; |
| 194 |
pinctrl-0 = <&pinctrl_pwm0_pwm1_2>, |
| 195 |
<&pinctrl_pwm0_pwm2_2>; |
| 196 |
}; |
| 197 |
|
| 198 |
dbgu: serial@fffff200 { |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
pinctrl@fffff400 { |
| 203 |
mmc0 { |
| 204 |
pinctrl_board_mmc0: mmc0-board { |
| 205 |
atmel,pins = |
| 206 |
<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; |
| 207 |
}; |
| 208 |
}; |
| 209 |
}; |
| 210 |
|
| 211 |
watchdog@fffffd40 { |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
rtc@fffffd20 { |
| 216 |
atmel,rtt-rtc-time-reg = <&gpbr 0x0>; |
| 217 |
}; |
| 218 |
|
| 219 |
rtc@fffffe00 { |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
led-controller-1 { |
| 226 |
compatible = "pwm-leds"; |
| 227 |
|
| 228 |
led-1 { |
| 229 |
label = "ds1"; |
| 230 |
pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; |
| 231 |
max-brightness = <255>; |
| 232 |
}; |
| 233 |
|
| 234 |
led-2 { |
| 235 |
label = "ds2"; |
| 236 |
pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>; |
| 237 |
max-brightness = <255>; |
| 238 |
}; |
| 239 |
}; |
| 240 |
|
| 241 |
led-controller-2 { |
| 242 |
compatible = "gpio-leds"; |
| 243 |
|
| 244 |
led-3 { |
| 245 |
label = "ds3"; |
| 246 |
gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; |
| 247 |
linux,default-trigger = "heartbeat"; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
gpio-keys { |
| 252 |
compatible = "gpio-keys"; |
| 253 |
|
| 254 |
button-right-click { |
| 255 |
label = "right_click"; |
| 256 |
gpios = <&pioB 0 GPIO_ACTIVE_LOW>; |
| 257 |
linux,code = <273>; |
| 258 |
wakeup-source; |
| 259 |
}; |
| 260 |
|
| 261 |
button-left-click { |
| 262 |
label = "left_click"; |
| 263 |
gpios = <&pioB 1 GPIO_ACTIVE_LOW>; |
| 264 |
linux,code = <272>; |
| 265 |
wakeup-source; |
| 266 |
}; |
| 267 |
}; |
| 268 |
|
| 269 |
i2c-gpio-0 { |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
i2c-gpio-1 { |
| 274 |
status = "okay"; |
| 275 |
}; |
| 276 |
}; |